Audi A3/S3 8P | Interior Light Upgrade!!

MotoAdventuresYT
21 followers
5 Video Views·Dec 1, 2022
Hi, I hope you enjoyed my video on Audi's Interior lights.
If you want to find out more about this awesome car, please make sure to Subscribe so you can keep up to date with my new experiences and mods with this car!
Facebook Page -
https://www.facebook.com/MotoAdventuresYT
Instagram -
https://www.instagram.com/motoadventureyt/
Removal tools -
https://bit.ly/2WcxPjy
Interior Light Bulbs -
https://tinyurl.com/yyqxeozh
- Interior Light Sizes
Middle Front - 42mm
Sunvisors - 36mm
Rear Light - 36mm
Hey guys, how's it going today? We're going to be doing the interior lights on my Audi A3.
So we're going to be able to make your car look from this
to this
So yeah, i'm pretty excited. So let's get stuck in
Okay, guys
So the first one we're going to be doing is the center front one, which is right here
You want to turn the light off like so if you get your little prime plastic tool, which you can find on amazon or ebay
So if you want to start from the back here use your tool to pry it open
Okay, so now i've got a little bit of leverage from the front here
I'm, just going to pull it a little bit and there we go
so
These are my bulbs here. They're just little basically the same thing, but just led strips on them
and when you
Take your bulb out. It's pretty simple. You just push it to one side
And then it will adjust and you can take bulbs straight out so there's one
And two
Two bulbs out. Okay. Hey guys, um, basically this is a couple of days after
Because it turns out that the bulbs that I had in the original video weren't the correct size
So i've had to reorder them and now i've got the correct size here
It's basically just the same type of bulb but it's now it's got four leds on them
You want to just place your new bulbs in?
And they just clip straight in like that
And then you want to get your other ones
There we go
Just make sure they're straight facing down
Make sure they work properly
Cool, i'm happy with that
And then we'll just put the cover back on
So it's just basically reverse where when it came off so you want to put the back one on first
And then just push the front
There we go
awesome
Okay. So now we'll start on the sun visor light
All right guys just to start with your driver's side sun visor light you want to
Go to the left hand side of the light here, which will there'll be a little indent for if you hit your
Tool that I told you guys to get you just want to put on the side there
And it's just a clip that holds it in like that
So there you go
Now you can either unplug it or not unplug it, but basically there's this little
metal shield here which comes off very simply just
Wiggle it off from this from that side there
the left side
Facing down to you
And there you go, you can see your light there to get the bulb out you just want to
Pull one side of these clips back
And then while you're pulling just give it a little wiggle
And just use your fingers to just pry it out like so and there's your bulb
now these aren't the same size as your
Main interior light. It's just a little bit smaller. You guys can see that
So
Fortunately the original lights I got for the main interior light was is the actual same size as the ones for the sun visor
What i'll do is i'll put the millimeter size of the standard bulb right
about here
Basically, they're all different. I know the main interior lights were for 42. But anyway, i'll put that back here anyway
And i'll also put it in the description of the actual sizes of the standard bulb
So you guys don't get the wrong ones so to put it back on
Put the new one on you just want to do the same thing. It's a little bit harder than the main light
As it's just a bit more
of a tricky situation to get to
And there we go
So you want to make sure that your bulb's nice and snug and now you don't want it rattling around
So there we go. That's on now if you just want to test it
So once you guys know that the light works perfectly and works when it needs to
You want to put your plates back on?
So you get your plate and the little two teeth which are here go towards the plug
And they just slot in there and then it clips on this side here like I say
And it just clips in like that
So once you've done that you just want to tuck the wire up inside the ceiling lining
And then just put it to one side and then this side you can just push and it'll clip straight in like that
And double check works perfectly cool
So i'm going to go ahead and do the passenger side. Here we go
two hours later
So someone seems to have had this one out before and bent the clip a bit too much outwards
And there we go
There's a passenger one done
Now we have to move on to the back
main interior light
Okay guys, so now we're starting with the rear one we'll be
First thing to do is use your little plying tool
And just go around the whole light just to get all the clips out
And
There we go
Straight falls out now. This one's just a bit simpler as you can see the bulbs are just here and here
so
to get these out, you just want to use your pry tool to
Pry it against the bulb. There we go. That one's already come out his clips
So there you go. There's your bulb straight away
And then you want to get your led one
And it's just a sweet straight swap push this in
Okay, so once it's all seated in there, you just want to test the bulb
Right side. There we go. So that's working perfectly. So again
Just prying it out
It's cage
There you go. There's the bulb there
And then you want to get your new one
And just again slot it into place
There we go. So it just does click in like that
And there we go. Perfect. That looks absolutely awesome
Okay guys, so once you've got your lights in you just want to make sure that they are
Definitely not loose and they're not going to flicker or anything in the future because there's bad connections
So just make sure that it's definitely seated correctly
Because you don't want any rattling or any flashing issues and in the future and then have to take all this out again
so you just want to
Turn light off so you guys can see better
Now there's clips all around this light. So you just want to make sure that you can
Get them all seated in correctly
And then just go around the light pushing each corner
and
There you go. Perfect
Okay guys, so i'm gonna end the video here I hope you guys enjoyed the video remember to like comment and subscribe
Um, i'm also going to be doing a couple more videos on this car. I've got loads lined up for this car on video wise
so, um
Make sure you subscribe down the bottom. And uh, yeah, i'll see you guys the next video. Peace
