Got her home from the frame shop, got alignment done on the way home and stopped by windshield place so they could test fit the windshield to make sure it's all straight and windshield was sitting well how it should. Everything seems really good so far. But things will get worse before better, gotta take it all apart now!
Bought this Van for my wife because its a reefer van for her flower business. Retail for this model is $45,000-$50,000
Project Expenses:
2015 Transit 350 win bid - $9,750 Auction Buyer fee - $775 Gas towing cost - $500 2015 Transit Parts Van - $6,500 Cut out Corner section - $500 Radiator Support - $200 Air Intake - $150 Power steering reservoir - $50 Power steering fluids x 5 Flush - $60 Frame shop corner repair - $1,100 Alignment - $60
Current Total: $19,645
If you like such videos and would want to see more content and more updates on whats going on with my project and little hints etc, feel free to follow my Instagram page, i post pics on there and whats to come because i upload the full youtube video. Follow me at https://www.instagram.com/fixitnick_YT
If, for whatever reason you find it in your heart to support our channel and our family projects to help us grow faster and be able to do more mod/upgrade vids sooner, here is my paypal. [email protected]
All of my Music is Copyright Free and I get of my music from a lot of sources. Here are the channels bellow that offer these songs that i use.
Alright, so after our alignment got done and test fitted the windshield to make sure everything's good the van is now home
The kids are playing in the yard
I
Just get stuck
Anyways, big sister will help them. But anyways with the van
so now what I have to do, let's see how they can see it here, but
Basically, the section was replaced from here
Like the top section not all the way to the engine bay this section. This is where the heater mounts. This was not replaced
It was mostly straightened out
The top section was replaced and then the whole
Section with the fit where the fender mounts
It was replaced there as well. I think he figured it out. He put put the ATV on the path by himself
Came all the way around and here we go
Wait Matthew, wait, don't fall
Don't fall careful careful billet. Is this a good idea to leave it over here?
You gotta put it back in the box
Matthew wait
Okay, Matt, you ready?
All right, there he goes so now what I have to do is pretty much remove everything that was installed temporarily and
Prep all the weld spots and paint them and
then call the windshield guys and they'll come in and install a windshield and
then I can
start
Reinstalling back everything on there
So it will be permanent, but everything is lined up good. There's no issues that I can tell at the moment
All the gaps are good. Everything is good. Everything's looking straight and then looking in here. I
wanted to
Prevent it from rusting the best I could to just put some tape on it. So yeah, once I do
The prep and paint the windshield guys will come out install the wind the windshield I
Still have to replace this bar because it's not
All the way to the hole or maybe straighten it out. I can probably pull this out a little bit
So he reaches the hole right here
so I can install it back in or
Just replace it with the one from the other van right there
We'll see. We'll see
When I get to this
Because it's pretty easy to straighten this out. It's not the heart of the metal. I can pull that out. No problem
The main thing is that the gap from here to the other side right there
Is the same and also from this hole right here on the bottom?
We measured from here to the other side and then the bottom right here we measured from here
To the other side as well
So as far as alignment goes we did alignment
Here's the sheet
The alignment guy said that it's pretty much perfect
He made only slight adjustments. We had
The accident was on the right side
So here you can tell what the actual was and what before was it's pretty much almost perfect
The frame guy did a really good job at pulling everything out
to where it should be
Comparing this to the left side
So yeah, everything's looking good so far
Hi
Hello
Matthew I'm making a video. We have a little birdie here
Good job one. Are you ready Matthew? Okay, hold on and go
Whoa
so fast
So yeah, I think it's gonna rain next couple days. So I'll keep the plastic on the windshield
Now they'll be it for this video
Stay tuned for another update. I might have one or two more videos for this van and then it'll be a complete project
I don't want to stretch this out too long
Because I have plenty of other things
hint hint
So once again guys, thanks for watching subscribe. If you got any questions, let me know and we'll see you in the next video