Tailor A Dress Shirt WITHOUT A Sewing Ma

Anthony Rivera
67 followers
4 Video Views·Dec 1, 2022
You read the title, not everyone has a sewing machine.
Let's slim this by hand.
And I don't really like long intros, so I'm going to give you about five more seconds
with the before and after and we're going to do this.
This is what we're working with.
This seam is called a flat felled seam and we aren't replicating this and it's a good
thing.
I'll explain why.
Flat felled seams will sit flat when they're on the side of your body, hence the name,
but they will not sit flat when you're trying to sew them.
They're going to make a triangle.
So when you're measuring, make sure it's either facing down or up and measure accordingly
and then do the opposite on the other side of your shirt.
For instance, if it's down on one side, it's going to be up on the other.
Also, patterned shirts like this, the patterns aren't going to match up.
It comes from the store like this and it's totally normal.
Put safety pins where you want that new seam to be and have somebody help you if you have
friends unlike me and do your best to make sure that those safety pins are even on both
sides too.
And by that, I mean, make sure that each one has a corresponding pin on the other side
of your garment.
Pin up those sleeves there too if you're going to do those.
See how you feel about the fit.
My God, my pants are really tight.
And move and flex and bend and make sure that you're going to maintain the proper range
of motion in your shirt.
Make sure the fabric between your safety pins are flat and that there aren't any wrinkles
inside of there at all.
And if there are, we'll get rid of them.
Go ahead and nah.
Go ahead and figure out the measurements to make sure that they're accurate.
And don't be an idiot like me and use white chalk on a predominantly white shirt.
Use something with a little bit of color.
Because we're going to make marks on the inside of that shirt where the safety pins are.
Now let's take these safety pins out.
Place them, connect the dots, and make a line on the side of that shirt.
If you're just slimming the side seams, ease your stitch out underneath your armpit seam.
But I'm doing the sleeves too, so I'm going to connect them about a half an inch away
from my old armpit seam.
Which is going to give me higher arm holes and they look amazing.
Your garment's going to be much closer to your armpit.
So if you have sweat issues, just use Certain Dry.
You'll thank me later.
Not sponsored.
Go ahead and put some sewing pins in the side to prevent your fabric from shifting on you.
I ease my stitch out at the cuff of my shirt.
I don't sew through it.
It allows me to have a slimmer sleeve while maintaining the ability to roll my sleeve
up.
There might be a small dimple, but it's all good.
Nobody has ever noticed.
Does your shirt look like mine?
Excellent.
Now let's go watch Tom Brady destroy the Eagles while sewing this bad boy.
We are sewing what's called a backstitch, where instead of continuously going forward
with our needle, we are going to go forward and then loop back around and lock it into
the previous stitch and then go forward.
This will make sure that we have a real nice strong side seam.
For real though, the Eagles absolutely deserve to get demolished in this game.
I'm still salty about the 2018 NFC Championship game against my Vikings.
Massive letdowns and Minnesota sports.
Name a more iconic duo.
This is our finished backstitch and it's not going to be glamorous.
Don't beat yourself up over this.
I'm not perfect at this either.
I miss stitches, but we are looking for structural integrity, not beauty.
Because on the outside where it counts, your stitch is going to be really strong and tight
and it's going to look great.
We are going to use some pinking shears to finish this off, which will cut a zigzag pattern
in the side, preventing it from fraying on us.
So leave about 5 eighths of an inch or 1.5 centimeters of fabric when you cut.
Holy smokes, this shirt looks so much better.
Let's go pair it with a slim fit sweater.
Every step, it's only two minutes long and it's in the end card.
I'll see you over there.
SD out.
Deuces!
