-Let's Add DARTS To This Dress Shirt! (Beginner Friendly)

Anthony Rivera
67 followers
8 Video Views·Dec 1, 2022
I am SD and this is what our shirt looked like in the beginning and we've been in the process of
measuring and taking in the side seams with a sewing machine which by the way took about five
minutes. And now it looks like this but oh no no no we are not done yet. We're gonna throw some darts
in the back of this bad boy. Now darts are incredible because they do a really good job
of slimming the back of your shirt whereas slimming your shirt by just taking in the
side seams it ends up leaving like this stupid poofy looking patch of fabric in the back. Let's
start with some sewing pins, a measuring tape, and an iron. We are starting with our shirt right
side in instead of inside out because for this step we want to make sure that we like the
measurements of these darts first. But yes we're gonna be putting the darts on the inside of the
shirt not the outside. Now measure your shirt and see how far it is from shoulder to shoulder
or actually more specifically like armpit seam to armpit seam. Now mine looks like it's about 24
inches or so so what I'm actually gonna do is I'm gonna start my darts seven inches from each of
these sides. And why seven inches you might ask? Well for me personally I found that having my
darts start seven inches from that seam is what ends up giving me the best result. But your results
might completely vary. You might end up doing six inches you might end up doing let's say nine
inches. So seven inches isn't necessarily a hard and fast rule. Now I've got these two pins at the
top of my shirt here. These are gonna be uh I'm gonna use these as placeholders and these are
gonna be the top of my dart. And then I'm gonna take my measuring tape and I'm actually gonna
use it to make a line all the way down my shirt to make sure that this line is straight. And right
down there. Boop! Okay so we've got our placeholder pins in here in all four corners there. And what
you can do to make sure that they're actually the same length and the right length, what you can do
is you can take your measuring tape and you can measure them. Mine are both 18 inches long. So
that way you know if one comes out at 18 inches and the other one comes out at like 19 inches
you're not gonna be walking around like Quasimodo. And I'm actually gonna turn these placeholder pins
so that they're actually going vertically with my shirt. I'll explain why. Now these placeholder pins
what we're gonna do is we're gonna take both of them and we're gonna pinch them and run them right
between our fingers. And you're gonna take it like that and you're gonna pull it and you're gonna
turn it on its side so that you've got a nice edge like that. It doesn't need to be ironed or
anything but you want to make sure that you pinch and pull so that you get at least like a decent
edge. A decent edge. Just like, just like that. Now we want our dart to be wider at the bottom of our
shirt and kind of start to taper off as it gets to the top. So on my shirt we're gonna be putting
about five pins in here not including these two placeholder pins. Now not including my placeholder
pin down here these two pins at the bottom they're both gonna be a half an inch. This pin right here
this is actually uh this is the middle of my dart here but this is still gonna be a half an inch.
And these next two pins up here these are a quarter of an inch. This is where my taper is
gonna start and then my top placeholder pin that's all the way at the top here. So what we're
gonna end up doing is we're really just gonna start to just make it disappear. Just make it go
away right when we get to the top. Just ease it out. Try it on and just like the measuring video
just kind of see how you feel about it. If it's too tight in your midsection or too loose then
just kind of play around with the measurements of these pins and do what you feel is comfortable.
This is what's going to be comfortable for me in this shirt but your mileage is going to
completely vary so these are not hard and fast rules by any means. Oh and don't be shocked this
will most likely be the very first time that you felt your shirt touching your skin in the front
and in the back. It's gonna be like a little bit uncomfortable because you're used to the bagginess
of a dress shirt. I know I was so as a heads up that's gonna happen. Take it off flip it inside
out and put your placeholder darts back in. Pinch that line that we did before like we've made
before and then iron it all down. Don't worry this part's like super quick once you get it
all down or you actually you'll end up flying through this. When you are done you want to ask
yourself one question one question only. Do your darts look exactly like mine do? Yeah? Okay good
then you're good. But if they don't you want to make sure that they look exactly like this
because we're doing the exact same thing like we did in the measuring video. We're setting
ourselves up for success later on. Our sewing machine is gonna be right here. It's gonna go
right over the edge so these pins are all placed perfectly so we can just yank them all out
as we go along. Normally what you would do is you would set yourself up for success on one side but
on the other side this is the back side of my shirt here. These pins are facing up. These pins
would also be facing up but then we'd have our fabric just kind of all bunched up underneath
our machine. Uh-uh we get to skip all of that drama. We're just gonna pull them out boom good.
And now it is time to sew. We're just putting normal straight stitch in this guy just like we
did in the side seams with the same settings. Back stitch the bottom of your dart and then
kind of kind of go slow at first if you need to. If you got to kind of ease yourself into it. I've
been doing this for a number of years now and I still kind of take my time on darts so if you're
going slow don't worry it's all good. Once you get just past that middle pin in your dart where
it's gonna start to taper ease your way out and kind of be mindful of that placeholder pin because
you want your dart to pretty much be gone by the time you get up there. And as you start to kind of
approach that placeholder pin your dart you're gonna be sewing right on the edge of your garment.
And then when you back stitch up here back stitch like twice maybe three times because too many back
stitches it's gonna end up making it look really sloppy. You're gonna have a kind of a dimple in
the back of it and you don't you don't want that. What some people do is they'll actually stop.
They'll stop and they'll hand tie their darts at the top up here but uh um I don't I don't like to
do that. And that is all there is to it folks! We took this generic shirt from Target and made it
look fantastic! These videos total or what like 17 minutes? Which is about like how long this whole
project will take you. I will see you on the other side ST out deuces!
