How To Tailor A Baggy T-Shirt (PRO TUTOR

Anthony Rivera
67 followers
9 Video ViewsยทDec 1, 2022
Let's say you go to the store to buy a new t-shirt and on the tag it says
something like slim fit or athletic fit or slim cut but it ends up
looking something like this. And you would much rather your t-shirt
to look like this on you. Well you're in luck because in this
video I'm going to show you how you can take
any baggy t-shirt that you have at home right now and you can tailor it in
minutes to just look perfect on you. And there's two things
that I hate. Ill-fitting clothes and long intros. Let's uh
let's do this. So we've got our shirt here all ready to rock and roll and make
it not look like this anymore. Well first this is the side seam that
we're going to be working with right here. Then we got to get our
materials ready. We need a sewing machine, some sewing pins,
some fabric scissors, a measuring tape, oh and pinking shears but they're
optional. Like super optional. Like don't go out and buy them specifically for
this tutorial. Now here's the problem. Here's the
problem. Look uh look at this side seam right here. Look at this.
This makes absolutely no sense. Does the side of your body go on a straight line,
a perfectly straight line like that? No it doesn't. It's not okay we want to
change this. Well how do we do that? First we got to
measure the distance between our armpit seam
and the very bottom of our shirt. And that distance on this shirt is
19 and a half inches. And depending on the size of shirt that you're working
with your shirt might be 18 inches long it
might be 22 inches long. The distance of your shirt isn't really
a factor. The only reason why you want to measure the distance or the length of
your shirt here is so that you can put four pins in
here an equal distance apart. And we're gonna do just that. I'm gonna
put a pin at four inches, another one at eight
inches, another one at 12 inches, and another
one at 16 inches. We got an extra half inch at the
bottom between that last pin and the bottom of our shirt but
it's all good in the hood. I'm SD and if you're new what I like to do on this
channel is show guys like you how to binge tailor
every single garments in their closet. So if that sounds interesting to you be
sure to click that subscribe button and join us. Well we got our pins in here
what are we what are we doing with these pins? I don't really get it. Well this
right here this is the fun part. This is the part where we can make this
shirt look any way that we want to. I'm going to share my measurements with
you in a second but I want to make sure to tell you
that my measurements are not hard and fast rules by any means.
So you're going to want to play around with these numbers and play around with
these measurements just to see how you feel about them. I like to
give my shirts a nice v-taper but this isn't about me this is about you.
You get to make your shirt fit you however you want to.
Now let's uh let's do some magic with these pins shall we? So this
top pin right here I put this pin at one and a half inches. And then this
second pin right here this one goes in to two and a half
inches. Same with this bad boy right here two
and a half inches. And then this one down here this bottom
one I have this one either come out to another inch and a half or I might even
do an inch with this one. And then I do the
same thing with the other side. Now I've got both sides pinned up right
here. Try it on see how you feel about the fit
of this. And if you like the fit at that point
then we can proceed but if you don't like the fit well this is the part where
you again play around with these pins and the
measurements. In case you're wondering yes you can use safety pins for this
step but just make sure you take them out before you use them on your sewing
machine because you don't want to use safety pins they're really cumbersome to
take out and just super annoying. So you like the fit? Good
okay we're going to take these pins out and we're going to flip our shirt
inside out. And you might be thinking oh so we're not uh we're not going to be
sewing on the outside of our shirt we're sewing on the inside right?
Yes we are. Pro tip copy all of these measurements down that you just made
onto like a sheet of paper or on google docs so that way when you go out and buy
the same size shirt in another brand or in the same brand you can skip all
of this. Yeah I just saved you hours of your life.
So let's replicate everything we just did. So we got one side all pinned up
here and you might be thinking okay so now what do we just do we slide our shirt
over and then pin the same side of our shirt here? No we don't we're
actually going to be pinning the other side of our shirt and the
reason why we're going to pin this side is
hang on I'll tell you in a second. See my orientation of my pins here
and do you see the direction that they're all facing in? When you're
sewing it your sewing machine is going to be on this side.
So it's just going to be marching on through
just like that and as we go along we can just plug these pins out
as we go along put them where they go and we will be done with this seam in
like a second. When you pin it up pin up this side so
now you have the benefit of taking advantage of where your sewing
machine is twice. Again just pull the pins out as we
go along. All right I'm gonna stop making sewing
machine noises let's uh let's go sew this bad boy.
Yo what kind of stitch are we making? Oh uh a straight stitch
2.5 millimeters in length. Why? Because that's how our shirt was manufactured
and we just we want to make sure to replicate that.
What kind of needle are we using? Um a universal needle
80-12. Why? Because it's a good jack-of-all-trades sewing machine needle
which is going to be able to handle this t-shirt in addition to a number of other
things well just fine. And what kind of thread are we using?
Polyester thread. Why? Well because unlike cotton thread
polyester thread is flexible and it's going to be able to move and bend and
stretch with us and we don't have to worry about ripping a side seam when
we're wearing our tailored t-shirt. All right good you're paying attention
let's have at it. And we're going to start off by back
stitching our stitch in which is going to lock this straight stitch in
and then we're going to go forward so you're going to see my machine go
forward and then it's going to go back a couple millimeters then it's going to
go forward again. Oh I lost my thread hang on we got to
rethread it. As we get close to this armpit seam
right here what I'm going to do is I'm going to
slowly angle my shirt out that way so that once we get up here
once we get all the way up there we're going to try and phase this stitch
out right in right through this corner right here. We're not tailoring or doing
anything to the sleeves on this shirt. If you want to connect these two
we would just keep going all the way straight through we would have a couple
pins on our sleeve up there we would just keep going all the way
through our armpit seam down to the end of our sleeve but since we're not doing
that we're just going to ease it on out here.
Back stitch it to lock it in so we don't get any accidents while we're in public
and then we're good to go. Do the same thing on the other side of the shirt
just play connect the dots. So this is what we got so far we have a
new uh we put a straight stitch all along down right here we gave it a
much more uh much more attractive and just
flattering looking appearance to it by giving it a nice a nice taper.
My line goes just like that nice and gradual.
That's exactly what you want you want your lines to be gradual and see how it
goes straight and then it kind of juts out a little bit aggressively like that.
When it goes like that you can get a dimple. I didn't but it's a possibility.
So you want to be careful with how well you're playing connect the dots when
you're sewing. Two ways we can fix this is one we can use more pins while we're
playing connect the dot to kind of just make that line easier to follow.
Or you can use tailor's chalk and just draw a line on your shirt and just
follow along that. I used to use my daughter's sidewalk
chalk in the beginning. True story. And in the event that this was too
aggressive for me and then I tried it on and I didn't like it is I just start my
stitch right there I go back I put my shirt on my machine I start right there
I go down and then I'll end up having two lines I'll have this original one
and then you'll see it kind of just keep going just off to the side just like
that do to do to do and then I'll angle it out and you never know in a million
years that that's what I did. Because we're cutting all that extra fabric
that's beyond that seam that we just made we're cutting all that off.
This side's good too nice uh nice even and gradual uh
taper there but we're not done yet we need to uh we gotta cut all this extra
fabric off right here and we're gonna need to finish our seam.
We can do that in one of two ways. One we can use some pinking shears which are
going to cut a nice zigzag pattern on the edge of
this as it cuts or what we could do is we could cut our seam off with a
regular pair of scissors here but that's not going to prevent any of
this from fraying so what we would end up doing
is we'll put a zigzag stitch on the edge to prevent it from fraying.
Both options are super easy I'm going to show you both of them let's start with
the pinking shears. And with these pinking shears we can just
cut it however we want to we don't necessarily need to be mindful
of how much fabric we want to leave on here we just want to make sure that it's
not too long to where it's uncomfortable but it's also not too
short to where it's way too close to that stitch that we just made.
A lot of people like to quantify things and you might be that guy so if that's
you to give you a number just go for like about a half an inch or so.
Now let's do the zigzag stitch. Now before we cut this
we do want to be mindful of how much we're cutting off
when we're just using a regular pair of scissors. We are going to want to leave a
seam allowance and a seam allowance is just the distance between that stitch
that we just made and the edge of our garment.
We want it to be five-eighths of an inch but it doesn't have to be super precise
like that give or take I don't know a couple millimeters or
centimeters or whatever it is don't worry about it. We just want to make
sure that we leave enough to make a adequate and proper zigzag stitch on
that edge. If it's too small then we can't do it if it's too big then it just
looks stupid. A zigzag stitch is when instead of your
needle just staying stationary right in the middle as you're sewing a
straight stitch it actually moves from side to side as it
goes along. And as it goes side to side it overlaps the edge of your garment as
it goes along preventing it from disintegrating in the washing machine.
True story I had to find that out the hard way.
Now the zigzag stitch can trip some people up when they do it you just want
to make sure the edge of your fabric is right in the
middle of your presser foot there because we want to
make sure that the needle adequately goes from side to side on both
edges here. So what it's going to do is the needle is going to go
into the fabric on this side and then it's going to come off. You're going to
see it and think like wait isn't it supposed to go on like the whole thing?
Nope lock it in first. Oh here we go that's what's up. So check
this out here. So we ended up coming off of our thread
back here but we started sewing all the way up there. Well what what's
going on? Ah I ruined my shirt! No no no no you didn't don't panic don't
worry we're just going to cut this off and we're going to start our zigzag
stitch right back here we're going to lock it in it's going to be like it
never happened don't worry. Just line it up where we lost it
lock it in locking our the new stitch that we're about to make
and that old stitch back there that we ended up losing and again it's like it
never happened it's all good in the hood brother!
And I'm coming off my fabric's coming off a bit so this is okay we can just
push it right back up there. All good. Fabric came rolled up
all good in the hood. Our needle might be through here so we're going to make sure
to turn our needle dial forward never ever
away from you so just move our needle up.
We're going to raise our presser foot to get our fabric back under there
all the way. Perfect and the only people who were going to know about that even
happening in the first place are you and me and the other 1.7 million people
who have now watched this video because well you shared it right? Boom! This shirt
looks amazing now holy smokes what a transformation!
Let's go pair it with a pair of DIY Chino shorts no pun intended!
We are doing just that in the end card I'll see you on the other side SD out
Deuces!
