How To Tailor A Dress Shirt (PRO TUTORIA

Anthony Rivera
67 followers
8 Video Views·Dec 1, 2022
Hi I'm SD and by the end of this video you will be well on your way to never having to settle for
wearing a baggy unfitted dress shirt ever again. Because I'm going to show you how you can tailor
any dress shirt from anywhere to fit you perfectly. These two shirts right here, these two shirts are
the exact same shirts. They're just different colors. They're both slim fit northrup dress
shirts from target. And one's been tailored and one hasn't. And I'll give you, I'll give you one
guess as to which one is which. And when it's all said and done we're gonna have taken in those side
seams and we're also gonna add some darts to the back as well to make it fit our lower back just
perfectly. Instead of looking all just poofy and stupid like most dress shirts do. Well this right
here this uh this is step one and for this step we actually just need some sewing pins and we need
we need a measuring tape. This is actually considered the hardest part but yo it is so
easy that it's going to honestly put this whole project into perspective for you. You can do this
whole thing in like 20 minutes or less and you're honestly going to be mad that you didn't try
something like this sooner. I guarantee you. All right let's get our shirt ready. And we're going
to start with our shirt right side in like uh like we're wearing it to the club even though
even though well nobody can leave the house right now. Not, not inside out. At least not yet. We got
to take our measuring tape first and uh we got to measure it. Now my shirt is roughly 16 inches or
41 centimeters for all my European guys uh from the bottom down here all the way up to uh the armpit
seam. And I'm gonna put five pins in here. That's ten. Five pins in here as kind of uh as temporary
placeholders. Depending on the size of uh of your shirt and the length of it it might vary a little
bit. So if you put four pins in there or if you put six pins in there instead of exactly five
it's totally okay. It's not a big deal. It's totally normal. Now I've got my pins all in here going from
the bottom to the top. I have a pin at one inch. I have a pin at four inches. I have a pin at eight
inches. Another pin at 12 inches. And this last pin up here is at 16 inches. And if your measurements
come out a little bit differently because let's say your shirt is bigger or it's longer, again
that's totally okay. It's normal. If your shirt ends up being I don't know let's say 18 inches or
20 inches whatever that is. Just keep going up in uh in intervals of four inches. Now these pins
right here what uh what are they doing? Well they're currently doing absolutely nothing. We want to use
these pins to completely transform and change the appearance of this dress shirt. And uh being
strategic with these pins will allow us to do exactly that. I personally like a more v-tapered
v-shape to my dress shirt. So I like the pins in the middle here to be pushed in farther into the
shirt than the bottom and the top pins. These ones here I come out have I have come out a little bit
farther to give it uh give it a nice hourglass shape. That gives me the fit that I want and the
fit that I'm looking for. But yo this is all about you right now. This is where the sky is absolutely
the limit. If you want your shirt tighter or looser in certain spots then kind of play around with
these measurements and the location of all these pins until until you get that fit that you're
looking for. Well here's what I'm going to do on this shirt. On my shirt I've got a half an inch
for this first pin down here at the bottom. This pin is one inch, one and a half inches,
one inch, and a half an inch. Now I'm going to do the exact same thing on the other side.
This side here this side is good to go. I did the exact same thing. And I'm not doing the sleeves
on this shirt. The sleeves are actually okay. But what you want to do for the sleeves, whoa hang on
let me let me back up a little bit. You can absolutely tailor the sleeves on any dress
shirt and what you would end up doing is you just keep pinning all the way up here through the
sleeves in the same increments of four inches. But be super careful because it's so easy to make the
sleeves on your shirt way tighter than you were expecting. I've done it a thousand times now it's
super annoying. Now that we got pins in both sides here all we're going to do is we're going to try it
on and we're going to see if we like the fit. We're going to see how we feel about it. If you're
comfortable with it then you're good. You are good to go. But there might be a couple of these pins
that you know they might kind of be a little bit tighter in some spots, looser in other spots. Yo
play around with this. Move them around until you feel good. Now we're going to take these pins out
and we're going to flip our shirt inside out. Now we're going to take the exact same measurements
that we did before and we're going to put our pins back in the same spot. And I'm going to show you
what it looks like but when I put these pins back in here I'm going to make sure to put them in the
right way. And by the right way I mean like they're facing, they're on the right side of the shirt
and they're actually like facing the right direction. My sewing machine it's going to be right
here. So my shirt is going to be fed through my machine just like that. So when I put my pins in
here I'm going to make sure the head of my pin is facing that direction and the pointy side is facing
that way. So that way I can just pull it out as I go along. All right this side is ready to rock
and good to go. And again my machine's going to be right here so it's going to be super easy. I'm just
going to pull these pins out as I go along. Boom done! Now you might think that you want to do the
other side here, put the pins on the same side. Well you don't really want to do that. Here's the
problem that you're going to run into. Yeah your machine is going to be going through it just like
that. Machine. But when you get to the other side my machine is still right here. Now I got
to move all this stuff over here. My machine is here. Well look you have all this fabric all down
here but all that free space all down there. So all this fabric just kind of gets bunched up
underneath your machine. So you're doing your thing and then it's just getting all crumpled
and it's annoying. Here's a super easy fix for that. We're actually going to pin the other side
of our shirt just like this. So now since we're going to have our pins on this side of our shirt
we get the same thing. Going through our machine pulling the pins out super easy. The bulk of our
fabric is over there. Got all this free space over here. Sweet it can just hang off and just do its
thing and we're going to be done in like I don't know two and a half minutes. Boom just like that
we are good to go. We got our pins on both sides of our shirt here. This is honestly one of the
biggest game changers when it comes to tailoring. The reason why it's a game changer is because
you're going to go on a tailoring binge one of these days and binge tailor like seven different
dress shirts. And when you do it like this it saves you so much time from having the fabric
just get all bunched up. Your shirt get bunched up underneath your sewing machine. You can just
fly on these seams. It is amazing. Let's uh let's go sew this bad boy. SD out. See ya.
