How Easily To Tailor A Jacket _ Make It Look EXPENSIVE

Anthony Rivera
67 followers
7 Video Views·Dec 1, 2022
I feel like he's like watching me right now.
Now there's two things that I hate,
long intros and how this jacket looks on me.
I'm SD and luckily I've got control
over both of those things.
Let's do this.
Man, this jacket, it looks and feels so much better
in every way possible, but how did we even get here?
I've got my jacket pinned up exactly where I want it to be.
These pins on the side right here,
these come in to one and one quarter of an inch.
And the pins that I have on my sleeve,
these come in to one inch.
And when I get down to the cuff down here,
this last pin right here,
this is actually about three quarters of an inch
because I wanna make sure that I taper this seam
out to the cuff perfectly.
If I don't do that, if I make way too drastic of a cut
and then kind of come into the cuff like that,
what's gonna happen is I'm gonna flip this jacket
right side in and it's gonna look stupid.
It's gonna look ridiculous.
Don't do it, I've done it.
And I am using sewing pins, yes.
You can use safety pins if you want to,
but you need to replace them with sewing pins.
You need to replace them because it's next to impossible,
if not 100% impossible to take out a safety pin
when you are actually tailoring this thing
on a sewing machine.
Just don't do it, I've done it, it's not worth it.
Now we have a huge, massive problem with this jacket.
That like 90% of you are not going to run into,
but for the 10% of you that will, this is for you.
And it has to do with this pocket right here.
I had to take so much off of this jacket
that this new seam is gonna come right up close
to our pocket, which means that this pocket,
it's gonna shift to the outside a little bit.
110% of the time, nobody will notice it
unless you point it out to them.
Works fine, like it's not a big deal at all.
But that being said, you're gonna notice it,
you're gonna be aware of it, not a big deal at all.
I mean, for a $4 jacket at Target, oh well.
And now it's time to sew this bad boy, right?
No, no, not yet, we gotta do the flex test first.
Oh, what's that?
Hey SD, I don't know what the flex test is.
Now you can't just measure and pin something
and then just stand there like a goon
and be like, yup, it fits, I like it.
No, don't do that, you gotta get out there
and bend and move and stretch and do things
in that jacket that you would normally do
to see if you actually like the fit.
Now, now does this jacket pass the flex test?
Let's see.
Hey look at that, it passed.
Pretty surprising for a $4 jacket, huh?
Now we got to flip it inside out we got to put our pins back in there and now
we're actually gonna sew it. So what kind of needle are we gonna use? Oh you're
gonna use a denim needle. Why? Because despite the fact that this jacket isn't
technically denim it's really thick so it's gonna be able to like you know go
just fine. So what kind of thread are we gonna use? Oh you're gonna use
polyester thread. Why? Because despite the fact that like cotton thread might be
more comfortable in this it's not gonna be able to move and bend and stretch
with you like polyester thread would. Good job. Let's do this. Okay so we've got
our machine all set up the way that we need it to be. We've got our stitch
tension adjusted. We're just gonna do a normal straight stitch. We've got our
machine adjusted to that. So let's uh let's do that. We're gonna start by
locking in our stitch by making a back stitch. And now we're gonna sew like we
normally do but just go as slow as you need to because this is a thicker
material and your machine might not be up to it and if it's not it's gonna let
you know. It's gonna start going like not really that bad but you get the idea. So
start off slow and then just kind of work your way into it. And we're going
right next to these pockets right here. I even could have taken in maybe about
two inches on the side here. So let's say I were to go back and try it on and I'm
still not really that happy with the fit. Let's say I could have you know made it
a little bit more slim or more tight. I know that I've got another 3 quarters
of an inch to work with on this side if I need to.
Oh no it happened! This happens sometimes. My thread broke. Is what it is. You're
gonna run into issues like that. There's some certain reasons as to why that
could happen. There's like three main reasons. One of the biggest ones being
that you're not using the right needle with the right thread which in this case
it's okay but is what it is. Let's just keep going. Actually the reason why it
happened this time is because there's a little notch on your thread here that
holds your thread in place and it ended up getting caught on that notch right
there which that's never happened before. That has never happened in the like 100
things that I've tailored but is what it is. You live and you learn and you move
on. If your thread ends up breaking the only thing you do is just pick up right
where you left off. Line your machine up around where it broke off and then just
kind of start over like you're doing or like you would at the beginning. So we're
gonna start off by giving it a back stitch. Go back a few and then just go
forward like it never happened. Boom! Kapish! Okay you can play outside with
them. You have 15 minutes okay? Alright. What? Go out the front door. What? Okay
fine go ahead. So we're at the seam that runs right underneath our armpit and
these seams are kind of thick so they can be tough to go over. So you want to
go really slow and what you can actually do if your presser foot has a
hard time going over it you can just lift it up just like this and keep going
real slow and then as soon as you're over it push it back down again. And now
we're gonna go straight through to the arm here. And now we're getting to this
last pin that's on our sleeve and this is the pin that we want to make sure
that we taper out all the way back to the cuff because well if we don't do
that then it's gonna have a stupid looking dimple and it's just gonna be
dumb. So what I'm gonna do is I'm actually gonna take this pin out right
now instead of waiting and I'm gonna just kind of eyeball it. You'll once you
get this down you'll get used to kind of eyeballing things and you'll have a you
have a pretty good knowledge as to whether or not you're doing it right or
you're doing it wrong so we're just gonna taper all the way out here. And now
we just we just do the exact same thing to to the other side. Right there is what
we are left with so what we did is we just put a new straight stitch right on
this guy so this is our old one obviously this is our old seam and our
new seam runs right along right here and I ended up kind of tapering in a little
bit it's gonna be okay it's not gonna be a huge deal but it goes in by about a
sixteenth of an inch here as opposed to down here not a big deal at all it
happens sometimes you would never in a million years notice it if I didn't
point it out to you now this is right here this is where our thread ended up
breaking and people will a lot of times panic when that happens they're like oh
my gosh what did I do I completely ruined it no like I said you just have
to you know kind of start up here like you did down here this you don't even
really notice it you can see the backstitching a little bit but that's
about it and we went up and we tapered excuse me we didn't taper we just kept
sewing all the way through through the sleeve all the way down to the end of
the cuff right here and this is the part where we would normally finish our seam
with a zigzag stitch if you don't know how to make a zigzag stitch what that is
it's just a zigzag what we do is we cut this and we put a zigzag stitch right
over the edge so that it doesn't fray and I made a whole video on it it's
probably right there right there I don't I never remember which side cards pop
out on if you want to know how to make a zigzag stitch go watch that but we're
gonna change it up we're gonna do something different I always use a zig
zag stitch I'm getting tired of always using a zigzag stitch so we're gonna use
this boom see that but wait SD that's just a pair of scissors no that's a pair
scissors those aren't scissors those are pinking shears and what these do is they
they cut a zigzag stitch pattern in our garment for us it's amazing and it's so
easy we're gonna use those on this seam and it's gonna be great it's not gonna
fray it's gonna save us a ton of time we don't have to put a zigzag on here so
let's go ahead now let's do that I'm gonna end up making a nice tutorial for
you guys on on pinking shears now I got these at Joann fabrics they were like 16
bucks I want to say something like that and they had a couple of other different
ones there that man there was a pair by Fiskars that was like $40 I'm like
nobody got time for that single dad I'm not spending $40 on pinking shears now
this right here we're at the seam that runs underneath our armpit it's kind of
tough cutting it I mean it's I'm putting a lot of pressure on there and
it's really just it's kind of struggling but if you kind of work it we're through
it's good so you might get some resistance it might be kind of difficult
but you just got to kind of like everything in life just push through it
I guess or just drink a lot and now our seam is finished we put a nice zigzag
pattern on there you can see all of this all that nonsense going up here all the
you know stray stuff that came off of our jacket but that's okay what would be
a good idea in the event that this happens is I would wash it by itself if
I were you just kind of wash it alone so that you can get rid of any excess
nonsense and then you're good you can wear it this you're good it's not gonna
fray it's it's really awesome and if it does it was $4 and then you just do the
same thing on the other side and another question that I know that I'm gonna get
in the comments is you want to leave yourself 5 8th of a seam allowance which
is about 3 quarters of an inch someone do the math for me let me know and if
you leave too much fabric on here not a big deal if you don't leave enough
fabric on here not a big deal the only difference is if you don't leave enough
fabric on here you might not have enough room for a zigzag stitch if you want to
make one boom that's all there is to it um I just realized that the front door
is locked and my daughter closed the garage door to go ride her bike so I'm
gonna go unlock the door for her so she doesn't get locked outside that's all I
got for you SD out deuces
