Wave Ribbon Christmas Tree Decorating Tutorial - How To Ribbon Technique - Holiday decorating

Designer Christmas Tree
129 followers
19 Video Views·Dec 1, 2022
I have been asked many times how to achieve the wavy ribbon look on a Christmas tree (like the one I did a few years ago). In this video I will describe and show you the technique I created to get this unique ribbon look, as well as show you other aspects of decorating a Christmas tree (floral picks, topper, ornaments, etc.) I am so glad to finally create this look again - and this time record it! This tree used about 200ft of ribbon to get this look (on a 7.5ft slim tree). I recommend using inexpensive, wire ribbon. I hope you enjoy! :)
I've been asked many times on how you create this ribbon look,
and it's actually kind of hard to describe, so I figured I'd show you in video form.
So, today I will be doing a full-size Christmas tree in the wavy ribbon look.
Okay, so now we're going to create our first wave for the Christmas tree.
You want the waves to be larger towards the bottom of the tree than at the top.
So, we're going to cut our first piece. These waves go together in sections, so you make each
section first and then add it to your Christmas tree. So, we have our first piece right here.
We're going to add another piece to it. So, we're going to line up these two ends,
and then we will... Okay, so you have these two ends lined up, and instead of cutting them
perfectly the same length, we're going to cut the new piece a little bit shorter.
So, then do a third. So, we'll line this up, and I like to keep these collected together because
it makes it easier to see how the layers will go together. So, I had lined up the new piece
with the end. I'm going to do the same thing for the third layer. I'm going to cut it just a tad
shorter. Okay, so now we have three pieces. I think in this layer I will do, or in this wave,
I will do five layers. So, line up your ends again,
keeping everything collected nice and keeping them in order because it just makes it easier.
Then, we'll cut this similar here. So, there we have our first four pieces. For our fifth
piece, we are going to use a different ribbon just to add a unique look to the waves.
We're going to have the print side facing this way because when this is on the tree,
that will be facing up. So, we're going to line this up as we did before with the other layers,
keep them collected together nice. Okay, so there we have our five layers together. So,
the next step is we're going to use a stapler, collect all the ends, make sure everything's
in the proper order. The other thing that's important as well is making sure that
they are in line with each other. Otherwise, they won't rest correctly on the tree. Okay,
so then we're going to staple these ends together and I'm just going to do two
to make sure that it holds it together nicely. So, then for the other end, we're going to collect
the ends all in line with each other again and then those are stapled together. So,
there you have your first wave for your Christmas tree.
