How to Paint a Christmas Tree with a Fern ๐ฟ๐ Step-by-Step Imprinting Tutorial with Acrylics

Kids Art Day
54 followers
How to paint a white sparkling Christmas tree using a fern leaf and the following colours:
Titanium white
Thalo blue
Turquoise green
20 Flat brush
14 filbert
Mini liner or 3 round
12x16 grey painted canvas- white works too
#kids #kidart #kidslearning #kidsvideos #KidDrawing #kidpainting
#drawingtricks #drawingforkids #craftsforkids #easydrawing #acrylicpainting
Comments are disabled for this video.
Today I'm gonna be showing you how to make a Christmas tree
by imprinting a real life fern.
I just picked this from outside my studio.
I've got a bunch of beautiful ferns growing out there
and I thought I would take one
cause look at the shape of it.
It looks like a tree, right?
So when you pick one,
you can actually pick any leaf that you want for imprinting
and I'll show you how to do it.
The same technique and steps apply for all of them.
What you wanna do is make sure that it's clean
and that it's dry.
And I wanna have a little part of the stem here
that I can hold onto.
So I just picked off a few of the little leaves
so that I could do that
and that gives us a little bit of a tree trunk as well.
And what we wanna do is paint the underneath of the fern
but I'll show you that when we get closer to that step.
Let's go over the supplies.
I've got a 12 by 16 gray primed canvas.
I just pre-painted it gray.
I'm gonna go over most of that with a phthalo cyan blue,
regular phthalo blue is fine.
And I've got some turquoise, a bright aqua green.
Both of these are by Liquitex Basics Acrylics.
I'm gonna be using some white for my tree for the fern.
I'm also gonna be using some white
for some little highlights and maybe some snowflakes
and a star glowing on top of the tree.
Let's go over to our brushes now.
I've got a number 20 flat that I'll be using
for the snow down in the foreground at the base of the tree
as well as to load the fern with.
I've got a number 50 filbert brush
that I'm gonna be using to apply the background colors with.
I will then go down to a one inch dry soft
synthetic mop brush to just blend out
and make it look airbrushed
and get rid of any harsh streaks.
So if you guys are ready,
I'm super excited to show you how to do this.
Let's go ahead and get started.
The very first thing I'm gonna do
is take my phthalo blue and my turquoise
and I'm gonna apply it to the canvas.
No rhyme or reason to how I'm adding it.
Just a little bit of each.
I'm gonna take my big filbert brush here
and just sweep that around.
Look at how gorgeous those colors blend together.
Add just a tiny bit of white
and just a little hint of that.
Now before this all dries,
I'm gonna go to my mop brush
and just soften any really harsh brush strokes
just by going around in little circles.
I'm gonna take a little bit of,
tiny bit of water on my mop brush here
and then switch over to a clean one
just to get the rest of them
the rest of those little spots blended out
because it was a bit too dry there.
Now depending on the temperature
in your room you're painting,
that will determine how quickly
or slowly your acrylic paint dries.
So it's pretty warm in here.
I had my fireplace going last night and this morning.
So it's nice and warm and toasty in here
but it's making my acrylics dry a lot quicker.
Okay, I'm gonna take a little bit more white now
because I wanna make sure that I've got
really kind of pretty sort of glow around the tree.
And I like creating these little swirls
that helps to make it look a little bit more magical.
The next thing I'm gonna do is take my flat brush here.
I'm gonna pick up some titanium white
just with my palette knife
and I'm gonna just dampen my brush
with a little bit of water.
Now remember the side that you wanna add the paint to
the underneath part of the fern.
You wanna get a nice amount on there.
The reason why it works best to add it on the bottom
is because the bottom part if you look really closely
it's the bottom of the fern,
the underside that has all the lines that stick out.
So that's what's gonna leave the imprint.
Okay, and then I can push this up.
Now you'll wanna make sure once you get this all coated
you wanna make sure that you have something dry and flat
to place over it like a paper towel or wax paper,
something that you can use to, it's called burnishing.
So you hold it over and you gently kind of just flatten it
and rub it over carefully with your fingers
to press it gently onto the canvas
to ensure a nice imprint.
I'm gonna make sure that I get it on the stem.
Make sure I've got enough on here.
You can always apply it again
if it doesn't work the first time.
So I just got some paper towel here
but I'm going to line it up.
I'll place it right there.
Okay, once you get it on there,
gently rub your fingers around it.
Work those little leaves.
Okay, let's see what we're left with.
I'm gonna pull this off.
And we get quite a pretty imprint.
So natural looking.
It's really, really fun to do this
and it's fun for all ages.
So I'm just gonna put that to the side
and now I'm gonna take my flat brush,
take a little bit of the white
and I'm gonna come around the base of the tree
and my blue background, my blue turquoisey background
is still a little bit wet which is nice
because I'm getting this softer tone.
I'm gonna add a little bit sort of around the tree here
so that we have a nice glow.
Pick up a little bit more white.
Make it a bit brighter right here.
So I'm picturing some lights on this tree
or even just the star on the top.
Maybe there's some moonlight
and it's just reflecting down here.
Okay, I'm gonna take a little bit more of the white.
Just a little circles like this,
getting really close to the tree.
Can make it look like there's a little bit of
mist or fog down here.
I'm gonna take extra white and just come right down here.
Next brush I'm gonna be using
is one of my mini liner brushes.
So just a short liner brush, a little bit of white
and I'm gonna add it right here to the top of the tree.
I'm gonna add just a little dab right there
and then I'll add a few little dabs around the tree as well.
A little twinkling lights
and then you can go around in little circles
around the outside of them.
And if you happen to lose that bright white inside,
just go back after you're all done and re-dab.
But you're left with that nice, soft, really pretty glow.
I'm just gonna keep going around here.
Adding little glowing lights.
If they're just pure white, soft shades of white,
that's fine too or if you happen to be picking up
a little bit of the blue turquoise base color underneath,
that's pretty too, see?
And you can always go back and add some more
of the blue and turquoise to your palette,
making different shades.
This will be my last tutorial of 2023.
I wanted to just thank you guys all so much
for all of your support.
This year on my channel and all of the years
that you've been following me,
if you've been with me from the beginning.
Okay, so with a little bit of white on my brush,
I'm just gonna pull, whoops.
We'll go with that happy little accident.
We're just gonna pull and flick little lines
for our glowing star on the top.
What helps to steady your hands
by just placing your pinky.
And I'm gonna just soften that with a little filbert brush.
You can use whatever brush,
whatever small brush that you want.
I just happened to pick this one up first.
I'm just gonna kind of go around,
soften those edges and then back over again
to a little liner.
Now you might feel more comfortable using a small round.
Teeny tiny brushes can be a little bit tricky
to control sometimes.
So I always recommend a few different brushes.
So yeah, for this, you might wanna use a little round brush.
But you know, just experiment with brushes
and you never know until you experiment
and you try what works best for you and what you like.
Okay.
Okay, I just got a little bit of extra white there
so I'm just gonna spread that around.
And also gently pull and flick off
for some little icicles.
Add a little bit more to the base of the tree.
Now let's go and redab the center
of either my sun, my moon, or my stars
just to make it really sparkly.
With a filbert brush,
I'm gonna take a little bit more white
and I'm just loading the tip of the brush
with a bit of white like that.
I'm just going over gentle little slopes like this.
And I'm gonna take a toothbrush now,
a little toothbrush I use for crafting
and spraying on little stars and flying snowflakes.
You just wanna get a little bit of water on it
and then gently, gently go around in circles
to just load it, turn it over,
and then aim and spray.
You can make your star look even glowier by doing this.
It's almost like using an airbrush.
You go over it multiple times like that
and you have the right amount of water
and paint in your brush.
You can achieve that look.
So see how I'm kind of going around
about an inch away from the tree
and I'm kind of creating this little glowing aura.
One last highlight on the snow down here.
I just think this is one of those really fun
ways to incorporate leaves from outside
and make something beautiful
out of something that's already beautiful
and natural and organic
and you can make an instant tree like this.
And there's so many more things
that I can't wait to show you guys in the new year
so be sure that you're subscribed to my channel.
All the best to you guys, much love,
and I'll see you soon in my next video.
Bye!
