mesa resinada trabajo en tintas al alcohol

oscarporras23
7 followers
14 Video Views·Nov 28, 2022
In the following video we will see how a job is made with alcohol-based inks
This was a job that was requested from us They sent us a sample image
And they asked us to make the cover this way
Here is the small table so you can see the golden and bronze glimmers
Since in the dark indoors it's not visible It's noticeable either
We took it out into the sun so the glimmers would be clearly visible
They sent us a picture for this job
And what did they want the job to be It's the picture
For this as I always tell you we
have to conduct our tests
There are our two tests that we did And we continue doing the work
Remember it's always important to do your tests when it's a new job
Here we see what will be used It isopropyl alcohol
Alcohol-based inks
And a bulb to blow air
First we spray the isopropyl alcohol onto the surface to make it wet
Then we applied isopropyl alcohol again this time using a dropper
That drop of isopropyl alcohol is what will allow us to push and play with the alcohol ink
A drop of alcohol-based ink
And then a bit of gold paint
And now we are doing the effects with the air bulb
This is very simple just blow in the direction you want to form the shape you desire
This air bulb isn't very special you can find it where beauty products are sold
I don't even know if they sell them in pharmacies or department stores
You can also work with straws by blowing on them but it is a lot of work
There is also a bulb called Sacamoquillo for babies which is similar and can also be used
You can easily find it at the pharmacy
In this case the process is very simple
and straightforward First spray the base surface with isopropyl alcohol
All of this so that the ink drops can flow smoothly into the alcohol
After spraying a little isopropyl alcohol is poured and then the ink is added on top of the alcohol
Alcohol-based ink that moves or shifts with the air
Whatever you use to blow air whether a straw or the tools I mentioned earlier
This cover was requested by us with golden and bronze highlights
There are alcohol-based inks that are golden and bronze
In this case we only had alcohol-based gold ink and the bronze was applied using a spray can
It has the same effect only that the spray from the can dries very quickly and can no longer be erased
The advantage of alcohol-based inks is that even after you work them and they dry you can completely erase them with alcohol
With a damp cloth and you erase it again all the work
The downside of the spray is that you can no longer modify the work but alcohol inks can still be modified
You can even erase the entire work
These alcohol-based inks are easy to find on Mercado Libre or Amazon
They are not that cheap but they are very effective they are good for many tasks
As you can see they are droplets of 10 or 15 milliliters
But each droplet goes a long way
Each drop costs around 100 Mexican pesos but lasts a long time
If you want to invest in these alcohol inks you can do many projects with these alcohol inks
They are sold in packages
The most well-known brand for these alcohol inks is Piñata
They come individually or in packages of 8 or 10 colors
Usually not all the colors are used
The most commonly used colors are black white blue red and green
If you're just starting out try to buy only the basics
As they progress their other materials can be made
The world of resins is like this Working with resins
is like this You have to start
with the most basic materials
As one creates and sells their pieces they can afford their materials and tools
It is a very noble and highly appreciated job
The works look very nice and people value them a lot
In my experience of almost 3 years working with resin it's a very rewarding job
And especially when customers are satisfied and let you know
Here we can see that the process is the same for the entire cover
The isopropyl alcohol drops are emptied and then the alcohol-based ink drops are placed on top
Then if they are going to work with alcohol-based gold ink it will also be applied on top
And as it dries the alcohol-based ink in this case black and gold is gradually removed
El Dorado remains as a line at the edge of black it looks very beautiful
In this case as I mentioned to you since I used a spray I have to draw the lines
If you notice I'm using an upside-down brush and I'm giving shape to the lines
If alcohol-based gold ink is used simply blowing or stirring it will create the lines
You can get this isopropyl alcohol at a store that sells tools and electronic materials
It is widely used to clean that type of materials and tools
I have also managed to get it at pharmacies but not at all pharmacies
Then if you can't find it at a pharmacy or department store look for it where electronic accessories or supplements are sold
Here the most important thing for this type of work is that the surface is moist and that enough isopropyl alcohol is applied
Isopropyl alcohol is not expensive it is relatively cheap
That will be the key to being able to work well with this type of design
Apply enough isopropyl alcohol and it is what will allow us to blow easily
And as the waves form they look like a type of waves or as if they were rose petals in different tones
In this case since black paint is used and it is being stirred it gradually fades so in some areas it remains black while in others it becomes a lighter shade of black
In some areas it remains gray and obviously in some areas we will leave it blank
Then a very nice contrast is created between blacks grays and whites
As I was saying always do your tests for every new job you are going to do
We conducted two small tests that we presented at the beginning of the video
We first did a test with alcohol inks on a base and then did a test with the resin
This type of work can be done in two ways
One is how we are doing it by drawing with alcohol inks and then applying a transparent layer of resin
The other way to do it is to empty the clear resin and work on the resin with alcohol inks
This second process is much more complicated and does not look as much like the photo they sent us
That's why we decided to make it as similar as possible and this was the method to make it as similar as possible
Here we are filling our isopropyl alcohol dropper
This will be done several times during the work
As I was saying isopropyl alcohol is not expensive so don't hesitate to use it enough for your work to turn out well
Here we are doing the opposite First we apply the ink to the
alcohol and then we apply the isopropyl alcohol on top of the ink
They realized how the ink expands into the isopropyl alcohol at the moment we added it
You can do it either way first isopropyl alcohol and then alcohol-based ink or vice versa alcohol-based ink followed by isopropyl alcohol
As I was saying working with alcohol-based inks is very noble because if the work isn't turning out the way we like we can modify it
We dampen a cloth or paper with isopropyl alcohol and wipe it making two or three passes and wiping it thoroughly
Then we can start modifying our work
It is a great advantage to work with alcohol-based inks
Here we are working on MDF
These alcohol inks can be worked on paper
There is a special type of wax I can't remember the name right now and that's where most of the work is done
Alcohol-based inks tend to dry quickly actually as soon as you blow on them they start drying and the image remains as is
But if they still want to modify the shape they can add another drop of isopropyl alcohol and it can be modified again
That is if we want to make a flower or something like that because that type of work is done a lot flowers are made as I was saying they are like petals and they end up making flowers or petals
Then if the figure doesn't look good the first time you can apply isopropyl alcohol again and reshape the figure until it looks the way we like it
Here's what I was telling you that I'm painting these lines here with spray paint so I'm doing them with the brush turned upside down
As you can see when you have more experience you can progress more quickly
Squeeze more ink into the alcohol more isopropyl alcohol and keep working it as desired
The first casts we did were small to show how it was done and now we are moving forward more quickly
In this type of work and generally in resin works they use mainly three different colors to create the highlights
The most commonly used are gold silver and bronze
I think I had already mentioned it we work with spray and spray cans
The aerosol can is ordered as gold spray the silver spray is chrome-type spray and the bronze spray is as is bronze spray
Those three colors give us a certain metallic effect the metallic highlights that are most commonly used in resin work
These alcohol inks can also be used to color the resin as translucent colors
To color the resin or give it color there are three main methods
The resin can be pigmented in translucent colors which can be blue black or
green As the name suggests because they will be translucent
Resin can be pigmented with powder pigments which give the best effects in the resin
Sometimes they create star-like bubbly effects
We achieve those effects with powdered pigments which are obviously the most expensive
It is also possible to pigment the resin with solid colors such as white black blue and red
This type of coloring in the resin is done with paste colors which are solid colors
This pigmentation can also be done with paints
In this case I do it with oil paints
In summary these are three ways to add color to the resin
Resin can be pigmented with translucent colors which can be made with Zayer oil-based inks
With alcohol inks such as the ones we are using
It can also be pigmented with powdered pigments
As I was saying they are the most expensive but they leave the best effect on the work
It can be colored with solid colors or in paste and paint
In painting and in paste they are solid colors
Translucent colors are used on river tables when the river appears transparent
Solid colors are used such as black and white
But even though they are solid the surface should be primed
Because even though they are solid colors they tend to have some translucency or transparency
Therefore you should always prime the surface
And the same goes for powdered pigments
Even if you add more pigment it will still remain somewhat translucent
It is necessary to prime the surface
When we do a job it is very important to determine whether we will let the resin flow to the sides
If the resin only remains on the top part on the surface
We must have it well determined Because sometimes even if
we don't want it the resin tends to drip only on the sides
Then if we don't want the resin to clog the sides we need to take our precautions in that regard
In that sense it is sealed well with masking tape around the entire edge
And if the resin starts to run when removing the masking it will take away what is dripping
And if we want the resin to flow to the sides we need to make a small edge a rounded one a beveled edge
At the corners or edges so that the resin flows to the sides
Because if we leave it without that edge without that rounding it might be difficult for the resin it might be hard for it to flow to the sides
Then with that rounding we will allow the resin to flow smoothly to the sides and to flow evenly
Because if we don't do that rounding it might slip through in some places and not in others
So we have to get that right
As with any resin work we must always use our mask
Because chemical products are used both the resin and the pigments as well as in this case the alcohol inks
They are chemicals and it is always necessary to respond to our mask
Then I strongly recommend that if you work with resin or any such work use your mask
A good mask that protects them from chemicals is the type of mask used by painters
And also when working with resin use your gloves doctor's gloves because resin is very sticky
Here we can see it's not very clear but we wanted to give a brief inspection of how the work looks
As we can see we also make it drip sideways
Here finally we perform the emptying the pouring of the clear resin
Obviously we first thoroughly level our surface tape around it and pour our clear resin
When they do a clear resin pour sometimes the resin leaves marks
For example if we are doing the resin casting there may be resin marks left
Since resin is a chemical product the first threads of resin may be marked on the work
Over time you will realize that certain jobs need to be properly sealed
It is called sealed whether with a sealer or with lacquer
This is so that the resin does not get marked when it starts to drain
I don't know if I'm making myself clear it's like when you pour water on a piece of paper
The first droplets or the initial drops that fall on the paper remain marked
Even if you keep adding water those first drops are already marked
Like when ink spreads on paper
And that can happen in jobs involving resin
But you will realize it over time
In this case alcohol-based inks don't have a problem because they dry very quickly and the resin doesn't go through that
But it has happened to me on some jobs
Especially in works on wood on wood
About triply which are stained
Especially because we also make desks and it has happened to us
But in this type of work with alcohol-based inks there have been no problems
And that would be all
This is the resin draining and it looks like the beginning of the work
