cómo hacer un cuadro tipo geoda con resina epoxica Sayer y cuarzos paso a paso

oscarporras23
7 followers
11 Video Views·Apr 22, 2022
paso a paso como fabricar un cuadro de resina epoxica y cuarzos utilizando materiales fáciles de conseguir y económicos marca Sayer
We would like to present to you a resin-based epoxy and quartz sculpture
This painting is 1.20 by 1.20 in white with blue featuring quartz and gold accents
We will try to explain step by step how it was made and the materials that were used
Here we see how the frame was cut and the crosspieces are nailed behind the frame to make it sturdy
Then the remaining holes are filled as they are driven
The holes are filled with resanalac in this case or plastic as you prefer
The joke is that the surface must be smooth and free of holes so that the resin does not seep through any opening
Once all the holes are filled it is sanded
A flat even pair to be placed between the belts and ready to apply primer
We usually load the gun first but in this case we'll do it manually so anyone can do it
We buy the first one in
a can If we don't find white we'll just use gray and then a white background with paint
If you find a white first you can give it a white first and that is enough
The joke is that the painting has a white background which is what is needed for this painting
We are applying the primer with the first gray layer and then applying the white paint layer
We did it with a sponge which is quite easy fast and inexpensive
In this case we did it with the sponge it's easy and simple
The point is that the painting has a white background whether with paint or primer and we can see how it looks printed
Here we are in the resin room
As we can see the image on the left is the one that will be made
It's a painting we made ourselves but smaller
The same design will be made but now on a large scale
The first step is to sketch the curves that the composition will have
The Geodes type consists of curved lines serving as a reference for where the colors and quartz will go
First the design is made with a pencil and then it is gradually filled in
In this case the spaces are first filled with quartz and then the spaces are filled with one color of resin and then with the other color of resin
We use Sayer resin a resin that is readily available and easy to find in any Sayer store
There are Sayer stores throughout the country
We are in Mexico City but Sayer is in all the states
This resin is worked one by one part A and part B
That is the same part of A is mixed with the same part of B
Mix part A and part B and stir for 5 minutes to ensure a
good mixture Five minutes is already enough
This will be done by hand with a drill
We make it by hand using a stick or any container that can hold the resin from both parts
It takes 5 minutes to cure and is ready to pour
In this case we will first make the colors and then pour the resin
We are still placing the quartz here
These quartz are obtained in the center of Mexico City
This is what we know about it
In Bipio they can ask for white quartz
There are different types of quartz
The most economical is white quartz
There is another type of quartz another type of stones but they are more expensive
What we try to do is use instruments tools and materials
to keep the cost of the painting from increasing too much
Always try to look for high-quality materials but not too expensive
So far the resin and the materials both pigments and dyes for resin are a bit expensive
Then we need to look for the most viable and readily available
options Both our budget and the ease of obtaining them
Because there are things that are not easy to get
We work with products from yesterday and it has not yielded results
They are not easy to get they are not that expensive they are market prices
We are finishing putting up the pictures
We will now pour the resin
Here the quartz is already inside the lines
Here went a little bit outside because the line was a bit off to the side
Then we saw it from different angles and we have to move it to one side
The lines are just for reference but you can check them from other angles
You can move the painting wherever it looks best
There the quartz crystals are still without resin without being glued without anything
Many people use a small gun to attach them but in this case since it's so large we'll use resin
Here with the quartz in place we will pour the resin
As we can see the quartz is transparent but there are also yellow and brown tones
Here we are with the resin the resin has already become part of it
We mixed them and we are going to make the colors that will be used which in this case are white and blue
We will use Zayer's alkyd paint in white for the color
This is to give the color solidity
Here we are showing it from Zayer it is encaustic painting it gives solidity to the color
If you use pure white pigment the resin will be transparent
Then we apply this type of paint so that it becomes a solid color and the resin does not remain transparent
We also dusted it with metallic powder which gives it an obviously metallic and shiny appearance
Then it is also good to use it
The mixture is made and to ensure the color adheres it is sufficient to brush it on for one or two minutes
When you check that the color is firm there is no need to move it much anymore
You yourself take out the mixer and there you realize if your resin is very transparent
But if it already has a solid color if it's a bit transparent apply a little more paint and if not that's it
Now we are going to make the color blue
In this case the color blue will be made with a Zayer ink
In this case Zayer's blue ink is used to give it solidity
We will do with Zayer's ink what we did with white and paint
In this case the ink is very affordable it's a small bottle and costs around 40 or 50 pesos but that's quite a lot
We are pouring the metallic blue pigment there
As I told you metallic pigments are used to give it shine and it looks very nice
This alkyd paint is also not expensive it's half a liter for 70 or 80 pesos and it goes a long way for many projects with toxic resin
If you see what it's used for it's very little and not that expensive
There we are mixing the resin with blue pigment
And only one or two minutes at most for the resin to mix well with the color
There we can pour it
We are going to try giving it a different shade of blue
We will also mix in some blue spray color and black pigment until we get the shade we are looking for
You can play with the colors you want until you get the shade you're looking for and like
We also sprayed it with xayr to give it a tone
This powder is another special powder it is known as diamond dust
This powder is an added bonus an extra touch it gives a shiny star-like diamond-like tone
Here we are pouring the black color
