How to make Persimmon decoration made with origami

Crafting Collection
146 followers
19 Video Views·Nov 23, 2022
How to make Persimmon decoration made with origami
Konnichiwa, I'm Yamamoto Emiko from Paper Decoration.
Today, I'm going to show you how to make a kaki, which is easy to make with origami and colored paper.
First, prepare the origami.
In the case of colored paper, prepare a square of 15 cm x 15 cm, which is the same size as origami.
I will explain how to make it with origami.
Fold your origami in fours.
Now, fold the origami in half, then fold the left side of each side in four.
The center of the origami will be on the bottom, and the edge will be on top.
Cut the corner of the piece into a round shape.
Insert a pair of scissors into the lower part of the piece, and cut the corner of the piece into a round shape.
Do the same on the other side.
Now, let's expand the piece.
The white part of the piece is facing the mountain.
So, fold it over.
Make a cut at the center of the piece.
Make sure that the cut doesn't go to the center of the piece.
Make a cut at the center of the piece.
In order to make it easier to roll up the four pieces,
use something like a stick to curl them up.
Stick them together.
You can use any kind of glue.
On one of the ends,
the one with the color on it,
apply a thin layer of glue to the corner,
and bring it to the other side.
Stick them together.
On the other side,
apply a thin layer of glue to the white side.
Bring it to the center.
It should look like this.
On the other side,
apply a thin layer of glue to the corner,
and bring it to the center.
It's a little bit difficult to stick them together.
So, you can bend them a little bit.
I'll come back to this later.
Now, it's three-dimensional.
Let's make a Kaki-no-Heta.
Fold a piece of origami in half.
Fold it in half again.
Cut it.
I'm going to use this one-fourth piece.
If you want to make it wider,
you should use a 7.5 cm x 7.5 cm square.
Fold a piece of origami in half.
Fold it in half again.
Cut it into four-fourths.
When you cut the Kaki-no-Heta,
make a round cut on both sides.
If you want to make the tip of the Kaki-no-Heta rounder,
make a round cut on both sides.
Now, let's spread it out.
It looks like this.
Fold the extra piece of fabric in half.
Now, fold each piece of fabric in half.
First, fold the edge of the fabric in half.
This is the edge of the Kaki-no-Heta.
Fold the edge of the Kaki-no-Heta in half.
Make the Kaki-no-Heta a little bit wider.
Fold the edge of the Kaki-no-Heta in half again.
It looks like this.
Fold the edge of the Kaki-no-Heta in half.
Now, make the Kaki-no-Heta a little bit more three-dimensional.
Fold the edge of the Kaki-no-Heta in half.
Pinch the bottom of the leaf like this.
Fold the edge of the Kaki-no-Heta in half again.
Make a triangle shape of Kaki-no-Heta.
Put the Kaki-no-Heta and the piece of fabric together.
This is the part where the origami was centered, and this is the part where you put the heta together.
You put the heta on the part where you put the heta together.
Put the glue on the back of the heta.
Apply it to the whole square part of the heta.
Put the glue on the center of the heta.
Make sure the round part of the heta is aligned with the center of the circle.
Place it in the middle of the fabric so that it is facing the right direction.
If it doesn't look like it's sewn, you can press it down.
It's okay if it sticks to the fabric.
Attach the axis to the top of the heta so that it is easy to decorate.
Prepare the string.
You can use any kind of string.
This is a string for a konpo, and this is a string that looks like a keito.
Cut the string to the appropriate length.
Once you have cut the string to the appropriate length,
twist the string so that it is even tighter.
Twist the string with your fingertips.
Now that you have twisted the string,
pinch the string from the middle of the fabric.
You can see that the fabric is curled up naturally.
Make sure that the string is even.
Cut the string a little longer than the fabric.
Make a knot where you want the string to be.
Twist the string once like this.
Once you have made the knot,
cut off the excess string at the end of the knot.
Put a lot of glue on this part,
and attach it to the center of the heta.
Wait for the glue to dry.
Let's make the leaves.
This is a piece of origami that is one-fourth the size of the heta.
You can also use colored paper.
Fold it into a triangle.
Fold it into a triangle and cut it into the shape of a leaf.
Leave the pointed part of the leaf.
Cut the mountain part of the leaf into a round shape.
Cut it into a round shape.
Leave the stem of the leaf.
Cut it off so that it becomes straight.
If you spread it out, it will become the shape of a leaf.
If you want to make it look like an insect has eaten it,
make a small circle and cut it off.
If you make a small circle and cut it off,
it will become a leaf.
If you want to hang it on the wall,
there is a ring here.
You can hang it on the ring like this.
If you want to attach the leaf to the ring,
you can hang it on the ring.
You can hang it on the ring like this.
If you put the glue on the back of the leaf,
you can attach the leaf to the ring.
Try to arrange and decorate your piece.
