How to Make an Ornament Wreath the Easy Way

A Well Purposed Woman
308 followers
32 Video Views·Dec 11, 2022
Learn how to make an ornament wreath the easy way with this step by step tutorial. Making an ornament wreath can be quite a feat, so read through this tutorial to learn how to make one with less hassle.
Making an ornament wreath can be so much easier when you have the right strategy. In this tutorial I will show you some little tips and tricks to make this wreath a little easier to make.
Here are the supplies needed:
-Straw Wreath Form (mine is 18")
-50 Large ornaments
-50 Medium Ornaments
-80 small ornaments
-20 miniature ornaments
-High temp glue gun & glue sticks
-Ribbon to Hang the wreath
-Patience 😂
Welcome to Day 6 of our Countdown to Christmas.
Today we're going to be making this beautiful ornament wreath.
So to get started, here are the supplies we'll need.
You're going to want a straw wreath form.
I got this one at the Dollar Tree for $3 and then you're going to want smaller ornaments.
I have a set of 100 here.
You're going to want some larger ornaments.
These I think I have 50 of those and then 50 of the medium ornaments.
And then I do have 20 of the miniature ornaments as well and then this pink ribbon which I'm
going to use as a hanger for my wreath.
So that's the first thing we're going to do is just take the ribbon, twine, wire, whatever
you're using to hang your wreath and attach that to the wreath form first because once
the ornaments are on that's going to be a lot more difficult.
So we're going to just tie a loose knot there and then we're going to go over to our ornaments
and we're actually going to remove all the ornament caps.
So just go ahead and twist those off the top of your ornaments.
I only did this on the larger and the medium ones.
I didn't do it to the smaller miniature ones.
So just remove all those ornament caps before you get started.
And then we're going to start attaching our ornaments and we're going to do this in a
strategic way.
So we're going to start by just attaching the larger ones on the outside of our wreath
form.
And to do this you're going to want to use a high heat or a hot glue gun.
The little one didn't work as well.
You can see I started off with that and then I quickly switched to the Surebonder and that
one worked a lot better.
And when you're attaching them to the wreath form you're going to want to glue right to
the side of where the ornament cap was and kind of face the ornament cap towards the
bottom.
It doesn't work well to attach it right where the ornament cap was because it's such a small
surface.
So just do it to the side of the ornament cap and then put a little glue in between
each of the ornaments.
I forgot to mention this but I really recommend using a foam board or something underneath
the wreath as you're doing this because the glue can drip onto your workspace.
So once we finish gluing the ornaments on the outside of the wreath now we're going
to move to the inside of the wreath.
And just like the outside you're going to glue slightly to the side of the ornament
cap and then glue the ornaments in between each other.
And one word here is that this video I've sped up quite a bit but this does take quite
a while.
When we're using this high heat hot glue gun the glue tends to dry a little slower.
And so you really do need quite a bit of patience with doing this.
And it can take up to two to three hours to finish it.
So be patient with yourself and take the time to make sure that the ornaments are adhering
well.
Next we're going to glue ornaments on the top of our wreath.
So in the same way we hot glued on the sides of the wreath we're going to just take the
hot glue and we're going to attach it all around the center ring of our wreath form.
And then again just take your time.
Hold the ornaments in place as long as you need to to make sure that they're well secured.
And then just do a ring around the top of the wreath.
Once the sides and top of the wreath are filled I found this to be the fun part of making
the wreath.
So now you're just going to fill in any gaps with ornaments and you really can just get
creative with this and it's almost like doing a jigsaw puzzle.
So you just want to find the ornaments that fit the spaces or gaps that are left over
and just have fun with it.
This was the part I actually really enjoyed doing with this wreath.
Because it required a little bit of creativity and I could start to see how the wreath could
actually look so that was exciting as well.
But if there's a bigger gap use a little bigger ornament, if there's a smaller gap then just
use one of your smaller ornaments.
Keep in mind the colors and try to kind of keep a balance with you know the glittery
ones and the matte ornaments.
But really if you're using kind of an assortment of ornaments it will probably look pretty
cool when you're done no matter what you do.
And then my final step was just to take some of those miniature ornaments that I had and
I actually got those when they were half off at the Dollar Tree so I think they were fifty
cents at the end of the season last year and just attach those anywhere where there's little
gaps just to finish filling in any areas that you might see peeking through of your wreath.
But at this point we really don't have that many openings so they're kind of also just
a decorative little touch to add and just hot glue them to the other ornaments that
you already have on your wreath.
One last step is you can add a bow or other embellishment to your wreath just to give
it a little bit extra touch.
I used this pink ribbon and made a bow for the top of my wreath and that's it.
Now we have this beautiful stunning wreath for our Christmas decorations, here it is
in my living room.
And again thanks for watching, I hope you have a great day and remember hit that red
subscribe button if you want to see future videos.
