0:00 The best intro today 1:41 What's wrong with rasps 2:44 Most important rasp considerations 3:50 overview of each rasp 7:50 why rasp shape matters 8:46 overview of each rasp 10:26 Trash or Treasure 11:30 $10 $50 $100 recommendations
Thanks for clicking on this video.
I don't want to waste your time, so if you're in the market for a bow making rasp, this
is my recommendation for you.
The Cutz All Fine Tooth Warden Grasp and the Goldenwood Rasp Set is the best way to get
started in bow making for under $50.
Here's the chapters of what we're covering today.
Thanks so much for being here.
And this is a new series.
I hope you enjoy.
This is complete trash.
You've got to be kidding me.
It's trash.
Trash.
More trash.
Welcome to the new series where I take archery products or bow making products and tell you
whether I think they are trash or treasure.
I really have not been wanting to make this video because everything's personalized to
each person and what they use.
I build bows nearly every day, so I've been testing 15 rasps and have hours and hours
with each of these.
So this is for my needs.
What I personally like for the bow building, I do.
I hope this can be useful.
So let's go over why I found a bunch of decent rasps and nothing that I really like perfectly.
And maybe one of you can recommend something to me that'll be great.
This is the problem with these rasps.
Too coarse.
Too small.
Too much the wrong shape.
Too flimsy.
Too much tear.
Too useless.
Too much a terrible shape.
Too blah.
I have purchased every single one of these rasps.
This is not sponsored.
Well, maybe I'll sponsor it.
But I have no affiliation with any of these companies, even though that intro looked like
Cutzall sponsored this video.
They didn't.
I don't even like them.
Kind of.
Well, I kind of do.
Yeah, you know what?
I want to sponsor this video.
Today's sponsor is Shatterproof Archery.
Kraber and I love getting useful archery products in the hands of archers.
And we're not your normal company.
And if you place an order with us, you can be sure that we will be hand twisting, serving,
and waxing your bow strings.
And we'll cut, sew, and burnish your high quality leather products.
And you can be sure that we shaped, tillered, and tested our bows.
And if you have any questions, comments, or concerns, I actually love helping people.
And so I'm happy to open up my computer and help you out.
And if you don't believe me, check our 1,000 five star reviews.
When I look at rasp, there's four things I want to know.
I want to know how fast does it cut?
How sharp is it?
How aggressive is it?
How quickly can I remove the material?
Because ideally, if you can remove material quicker with a smoother finish, that's what
I like to look for.
The next thing is how quickly does it get clogged?
How do the teeth hold up?
Do they get real bogged down with wood?
Or do they stay super clean so you can continue removing wood?
The next thing is how easy is it to clean out?
Here's a quick tip I've learned is to use an air compressor.
If you spray this air onto the rasp, for most rasps, it's going to clean it out really quick.
That's the quickest way I clean them out, if they get clogged up or bogged down.
The next thing would be how long does it stay sharp?
This one right here, the Nicholson 49, I've had for at least 10 years, and it is still
sharp.
I've worked on over a hundred bows, probably hundreds, multiple hundreds of bows with this
rasp, and it's going well.
But don't buy this one.
A lot of people like these 4-in-1s.
It has super coarse, coarse, medium, and fine, and it allows you to go to basically four
different grits with one rasp.
One side's round over, one side's flat.
The reason I really hate these rasps is because they take forever to use.
Your stroke length is only like three inches, and that just makes it so slow and so inefficient
to use these.
But you really could pick one of these up for $10 if you want to go the very cheapest
method, if you don't mind using a lot of your time and muscles.
Now, I've also bought every single rasp I could find from Lowe's, Home Depot, Menard,
Ace Hardware, all these hardware places, and I dislike pretty much all of them.
Their files are okay, but the rasps are not my favorite.
So I've actually gotten rid of all those because they're so bad.
You've got to ferry your rasps.
These are nice because you can just destroy material with it, but what I found is there's
a rough side and a smooth side.
I never use the rough side.
It's just a little too rough.
What I really like about this one is the super long stroke length.
You've got 12 to 16 inches, depending on the type of rasp you get, so that you can go in
one direction a long time and remove a lot of material.
Just think about the difference.
This coarseness on the back of this Ferrier rasp is about the same as the coarsest on
the 4-in-1, but just imagine the stroke difference.
You've got so much more room here and so much more pressure, it's going to remove material
so much quicker, which is super nice.
So I like this and I use it all the time, and for the price, I think they're $20, $30.
I think it's totally worth having one of these on hand, but at the same time, if I only could
spend $50 on rasps, this would not make the cut, although I use this on every bow almost.
We've got the good old Nicholson rasps.
This one is a Nicholson 49.
I have been using this one for 10 years.
Now after doing a fair amount of research, it seems like Nicholson changed their manufacture
about three to four years ago, and from what I read on the interwebs, the quality has crashed.
So this old one is really good.
I can't necessarily recommend the new ones, but I really like this one overall, a round
side and a flat side.
It's nice.
It's just kind of middle range expensive.
It is pretty coarse.
It's good at hogging out material.
One of my favorite things about this one is that the width is continual for the most part
all the way down.
I wish it was continual all the way down and then got real thin at the very tip.
This one doesn't, but the next ones do.
Now these golden wood rasps are an Amazon find.
They're quite cheap.
They come in a set.
It's like 20 bucks for all three of these.
I love them and I hate them.
Here's why.
The teeth on them are very comparable to the Nicholson, so that's super nice.
The shape on them is almost great, but it's not.
It's almost great because it comes to such a fine point.
This allows you to get into any details that you're wanting to on a bow.
So it really is nice.
One side's round, one side's flat, which is handy as well.
The downside is it has a taper the entire way.
So it starts thick and goes super thin.
Here's why I'm not happy with these is because it's so thick at the bottom.
It's thicker than the hand groove I want in my bows.
So when I'm shaping a riser, I can only use the top two, three inches to shape it, which
is okay.
Now this is the right size with the Nicholson.
It's thinner on the bottom, but it doesn't get super tight at the top.
If I had the bottom, if I had this whole stroke with this on the top, now I think that would
be the perfect bow making rasp for me.
When talking about the shape of the rasp, it also determines how you add pressure.
The point here of the golden rasp is painful to put your hand on.
So this is more of a one-handed rasp, and I hold it like this.
And depending on your strength, it's really not that hard.
You have plenty of pressure.
You can see you anchor it in your forearm, put your finger here, and this allows you
to get in any corners and crevices you need quite easily, and it's just like an extension
of your hand.
So I like to do that.
With the Nicholson, it's got the flatter tip, so you can put a lot of pressure.
Same thing with the Farrier's rasp.
You can put more pressure on this because you can use two hands.
So that's something to keep in mind with the one that comes to the super point, is you
can't put as much pressure with two hands, but one-handed pressure is enough for me.
Now we've got this interesting company, Kuzo.
These rasps I've been using for about six months.
The most critical review I found online for these rasps I actually find to be correct.
They say it tears the wood, it doesn't cut it, and I do think that's pretty much correct.
It's got this interesting pattern.
It's not like these cutting teeth.
It really does feel like it tears the wood.
I've found that the warding rasp is much more useful than the roundover rasp because on
the warding rasp, there's these sides that are roundover anyway that really allow you
to get into the crevices and cracks or the tight spots you need.
So I really like the feel of this warding rasp, but I don't like the coarse ones.
I only like the fine-tooth one.
The thing is, the coarse kutzel rasp, kutzel, kutzel, kutzel, kutzel, kutzel.
Kutzel.
Kutzel is what it's supposed to be?
It probably is kutzel.
That makes sense because they're trying to do a...
The coarse kutzel rasp doesn't stand up to these ones.
And this one's like $50, where a three-pack of these is like $18 or $20 or something.
So I like the actual teeth for the coarse rasp.
But for the fine one, the kutzel fine rasp does great.
I hope it cuts all because I cut fiberglass with this all the time.
And it's holding up super, super good.
The warding rasp allows you to get on the tip overlays, it allows you to get into the
arrow rest or inside the throat of the handle.
It allows me to get everywhere I want.
And you could do the whole thing with just this.
So for my area, the box store rasp are trash, old Nicholson, treasure.
Kutzel coarse, trash.
Kutzel fine, treasure.
The golden wood rasp, trash-er, trash, trash, trej, they're okay.
The farrier's rasp, I'm actually going treasure because I do use it all the time.
It's just if I could only spend 50 bucks, it wouldn't make it.
But if I could spend 100, it would.
What I have not done yet is spent $150 on hand-stitched rasps.
Now that may be the answer to my problem to get the best possible solution.
And for the amount I use these things, that may be in my new future.
So if you've had experience with beautiful hand-stitched rasp, let me know if you think
it's worth it.
I'd really appreciate that.
Hand-stitched rasp is literally they make all the cuts by hand in a random pattern.
Okay, so here's my recommendation for your budget.
Under $10 or $15, just get the four-in-one.
If you're not making a ton of bows, you're going to make five or ten or one bow.
This is great and will get you by.
Just going to take a little bit more time.
Next, my under $50 recommendation is going to be the Goldies.
They're not really Goldies.
They should have called them that.
And the cuts all fine-tooth warding rasp.
Next, if I'm going to have a $100 budget, I would jump over and probably get something
more like the Nicholson 49 with the cuts all fine and the farrier's rasp.
These three will probably get you in that $100 budget.
Based on the ones I've tested, that's what I would do.
Now, remember the most important thing I'm going to say this whole time is that you make
the bow, not the tool.
The tools are very helpful, but if you have patience, if you've got a little bit of time,
then you don't need as nice of tools.
You can make just as good of a bow with the lesser equipment than the greater equipment.
These are time-saving tools for me because it's my job.
If you need archery equipment, go to shatterproofarchery.com.
Check it out.
Thanks to everyone who's done business with me.
It really means a lot.
We've got another batch of bows coming out on the 1st, so if you're interested, check
out the website and you'll get all the information you need there.
And with that, stay shatterproof.
I'm for you, and I'll see you on the next video.