This video tutorial teaches you the step by step the process of making DIY sock gnomes from old socks. From start to finish you will find it so fun to see how orindary old socks can be transformed into cute and adorable sock gnomes for fall and Christmas gifts and decor. I cover every step and make it easy for you to follow along.
Supplies List for Sock Gnomes:
-Old or new socks- I prefer neutral colors -Fabric for hat -Faux Fur -Wood ball (1”) -Polyfil -Rice -Rubber-band -Wood skewer or wire -Sewing machine and thread (optional) -Hot glue and glue sticks
Sock Gnomes are cute little gnomes that end up being 14”-16” in height. They make perfect fall decor items or Christmas gifts for family and friends. They are SO ADORABLE and can be totally personalized with clothing items or additional embellishments. These sock gnomes are very high quality and can be used from year to year.
The process to make these sock gnomes is pretty straightforward, but if you are not familiar with them then I take you through each step:
There are the 8 steps to make the adorable sock gnomes:
Step 1: Cut your sock into a 7-8" tube shape. Step 2: Turn your sock inside out and sew up one end. Cinch up the thread and tie it off. Turn right side out (skip if using the toe portion of the sock). Step 3: Fill your gnome body with rice and polyfil. Step 4: Close off the top portion of your body with a rubber band. Step 5: Using the pattern cut out your hat and beard. Step 6: Sew or hot glue your hat together. Step 7: Fill your hat with polyfil and a wood skewer or wire. Step 8: Hot glue your beard, nose and hat in place.
That’s it! And now you can embellish and personalize your gnome however you like!
These sock gnomes are super inexpensive and you can get 4 gnomes out of one pair of long boot socks.
Okay, so to get started with our DIY sock gnome,
we're just gonna use a basic sock.
So this is one I got at a Menards
for I think four socks for $2, so 50 cents a sock.
So just any sock really will do.
You can use a long one like this
and get a couple gnomes out of them.
Or you can just do an ankle cut sock
and that would work just as well.
So to start, you're gonna cut off a section of the sock,
probably about eight to 10 inches.
And that even might be a little long,
but just cut off about that much of the sock.
And you're gonna start by putting some rice
into the bottom of the sock.
So just open it up, dump in half a cup to a quarter cup
just to give the gnome weight
and that will help it to stay nice
and stand upright, I guess.
So do a little more here.
I guess I'll just do the whole half cup.
So half a cup of rice in the bottom of your sock,
then take the polyfill and just fill in your gnome.
And as you make these gnomes,
you'll start to kind of get an idea
of what size you like them.
My gnomes usually end up being about 15 inches
when they're standing up with their hat.
So just get a nice filling in your sock
and then you're gonna take your rubber band.
I end up using a lot of hair ties
because I have three girls
and we have lots of hair ties in our house.
So I just will twist off the top
and you can make these gnomes completely without sewing
or you can use sewing for the hat.
And I will show you how to do that.
I used to take a needle and thread
and close it up that way, but it's really not necessary.
So now I usually just take a rubber band
or a hair twist and just tie it off like that.
Take your scissors and cut off any of the excess of the sock
and now you already have your gnome body.
So the next step is to make the hat.
So we're gonna put this off to the side.
And for the gnome hats, you can also be pretty creative
and choose any type of hat you want.
I have some minky fabric left over
from a baby blanket that I made.
So I'm actually gonna use that.
There is a pattern down below in the comments
for you to use and that's what I have here.
I've used this one for many, many gnomes.
So it's a little ragged, but it still works just fine.
I like to line up one of the edges,
straight edges with the fabric
just to save as much fabric as possible.
And then just cut out your pattern.
You can pin it in place if that works better for you.
I'm just gonna do it fairly quickly here.
There, and then you have the base of your hat.
So the next step is to close up your hat.
So you're just gonna fold over right sides together
and now you can start to see the shape of the gnome hat.
I didn't cut it perfectly, so it's off a little bit there.
I could trim it, but I might just wait
until after I've sewn it.
So now you can take the hat over to your sewing machine
and just run a seam along the straight side here of the hat.
If you do not know how to sew yet,
you can also hot glue that in place.
And I'm gonna try that today
because normally I sew mine in place.
It just really gives it a nice sturdy finish to the hat.
But today I'm gonna try to hot glue it
just for those of you who don't sew,
just to give you an idea that you can do it too.
I like to find ways that make things easier.
So this is one of the ways I'm hoping
will make this project easier for you if you don't sew.
So just take the hot glue gun
and run it along the straight side here.
My hot glue gun is still warming up.
But if you do choose to sew,
I have a couple hats here that you can see.
I'll turn it inside out here.
You can just see I just ran a seam along the straight edge
and then it gives you a really nice look to your hat.
So that's how you can quickly sew the hat.
But let's see if the hot glue gun is ready now.
And we will finish hot gluing it.
And of course with hot glue,
the reason I prefer sewing
is because I tend to be a little clumsy with the hot glue,
but you just wanna make sure
you don't get that on your fingers.
And you can use any kind of fabric.
Felt also is very easy to use
with hot glue and the gnome hat.
But once you have it,
hot glue gets everywhere, doesn't it?
But once you have it in place and it's glued down,
and be very careful you don't touch the glue.
You can also use a silicone gloves.
That will prevent your hands from getting on the hot glue,
which is a nice feature.
And I am just gonna cut off this extra
part of the hat here that I had.
And when the glue is dry,
then just turn the hat inside out.
And you could use a pencil or a wooden skewer
or something to poke out the top.
I have a wooden skewer that we're gonna use
to fill this hat with.
So I'm gonna use that just to poke out
to get that pointy edge on your hat.
And then with the hot glue, it's not always perfect.
So if you wanna go back and touch up any spots
where the hot glue didn't stick very well,
you can do that too.
That's probably why I do prefer the sewing.
But if you don't know how to sew,
then this is a easy alternative.
Now that we've filled our sock
and cut out and glued our hat together,
or sewn it, whichever way you prefer.
The sewing is a little bit neater,
but you can probably be a little more careful
with the hot glue than I was
and get a really nice hat still.
I'm gonna go with the hot glue hat for this tutorial.
But now that you have filled your gnome and done your hat,
now it's time to put your gnome together.
And this is really all there is to making a DIY sock gnome.
So the first thing I like to do is attach the beard.
So I do have a little pattern,
like I mentioned down in the comments,
so you can print off your beard.
I just kind of put it up on the sock
and you may actually wanna adjust the size a little bit.
Like this one, maybe I could have added
a little bit more fur around the bottom.
So just use the pattern or make your own
and cut out the beard.
And then you're gonna hot glue that onto the gnome.
And I try to do a little bit below
the edge of the faux fur
just so that the glue doesn't come out onto the gnome.
I don't like when it's visible on the sock.
So put your hot glue on and then just stick on your beard.
And usually, even if this isn't done perfectly
or what you would think is perfectly,
it still turns out cute
because when the gnome is resting on the table or shelf,
it kind of hides some of the imperfections
so it doesn't have to be a perfect shape beard.
And then the next thing I like to do is put on the hat.
So to fill the hat, I'm gonna use polyfill
and then I'm actually gonna use a wooden skewer
to help the hat stand upright.
And you can use a wooden skewer
or a wooden dowel like this,
a wooden skewer like a kebab skewer,
or you can even use,
I like using wire and that works as well.
But if you're brand new to making gnomes,
I would just stick with a wooden dowel or a wooden skewer
because it's gonna be a nice solid shape
or it'll help you keep the shape
of your gnome's hat really nicely.
So I'm gonna cut this one down a little bit
so it's just about half this size.
And if you have like a kebab skewer, that works too
and it's a little easier to cut,
but I'm gonna use this for this gnome.
And just take your polyfill and fill in your hat.
So what did I do with the rest of my polyfill?
So just fill that in as much as you like.
I always adjust it a little bit after I fill it initially
and you can keep like an inch or two on the bottom open
because that will be like your sock guy.
So once you put it on there,
see how it's kind of too full
that it's not going down onto the sock?
So I'm gonna take out some of the polyfill and try again
and just try to fit the hat
so that it touches the edge of the beard
and that will give you a really cute look.
So once you're satisfied with the position of your hat,
like mine right now is a little off center
so I'm gonna adjust it a little bit more.
So that's gonna be the right amount of polyfill.
And this guy, the hat is standing upright
with just the polyfill
so I wouldn't even necessarily need the little dowel
but the dowel does give it a little bit extra strength
so I'm just gonna add it
and you can just stick it through the center of your,
where you tied off your sock
and the skewers kind of do poke through easier
than this dowel is doing
but it still works okay.
And then again, just pull your hat down
until you have a nice look.
I like how that looks so I'm satisfied with it.
So now I'm gonna hot glue it in place.
So I take my hot glue gun
and just glue all the way around it
and I kind of tuck the fabric underneath
like a hat would be
so you don't see the unfinished edge of the fabric.
Gets kind of messy with the fur a little bit
but it's part of the fun I guess.
Remember to be careful with the hot glue gun.
They are so dangerous.
The silicone gloves again are a good option
if you don't wanna burn yourself.
Okay, so our hat is in place.
I need another hot glue gun.
So the funnest part of making the gnomes
is adding the gnome nose
and it just makes it look like a gnome, right?
So I kind of like to pull away a little bit of the fur,
just push it down
and try to kind of fill it around the nose.
You wanna line the nose up with the edge of the hat.
A hat, sorry, came up kind of funny.
So mine's pretty good there.
You're gonna put a glob of glue
onto the center where you want your nose
and then you're just gonna hold his nose in place.
And that is pretty much all there is
to making a DIY sock gnome.
Now there's a million different things you can add to it
or variations of the gnome
but this is just a very basic sock gnome.
And then if you look below,
I also am gonna have a video on how to make the girl gnome.
So as you can see, like with the girl gnome,
I did add a lot more embellishments.
I added a little outfit on her
and a little thing on her hat.
And that part of that is because the girl gnomes,
they don't have the beard to kind of fill in.
So they're a little bit plain with just the berets.
But if you are interested in how to make a girl gnome,
then you can also find that video below.
But this is just a quick tutorial
on how you can make a DIY sock gnome
with sewing or without.
And again, the pattern is below.
If you would like that, you can just sign up
and you will get that directly to your inbox.
But let me know what you think.
I know there's a lot of gnome lover makers out there.
So I would love to hear from you too.
Any cool things you're learning
or any additions or things you would do differently.
So anyways, thanks for watching.
And I hope that you'll follow along below
with the subscribe button
and that we can continue crafting together.