CK7OwvlQhtE.

A Pretty Fix
16 followers
5 Video Views·Nov 15, 2022
Hey guys, Jellica here from aprettyfix.com and today by popular request I'm back with
another weaving tutorial.
Today it is all about rya loops.
You know I love adding subtle texture to my wall weavings and I find that rya loops really
does the trick.
It provides a lot of warmth, liveliness and just a lot of interest in my wall weaving.
So if you love adding subtle texture to your wall weavings or you just want to learn a
new weaving technique then you're going to love today's tutorial.
Okay on to the good stuff, let's get started.
Okay so I'm going to be showing you how to create rya loops for your wall weavings and
this technique can be applied to any shape, any design.
You can create rya loops that go across the entire warp.
In this case I'm creating a shape, I'm creating a circle that I'll be filling in.
If you're going to be creating shapes that are anything other than horizontal rows then
I would recommend that you mark it out using something like a water-soluble marker.
I use this one by Clover.
I'll leave a link in the description box for those of you who are interested.
You can use a pen, you can use a marker.
As long as you know that the work won't show through after you're done you should be fine
but I always like to use something like a water-soluble marker just in case some of
the warp strings that are marked do show through.
All I do is take a damp cloth and wipe it down.
So in order to create your rya loops you'll just grab your yarn.
In this case I am doubling up, I'm using two yarns but you can use one, three.
You can create whatever kind of design you're looking for but I just kind of like the look
of these two.
I think it will create an interesting texture.
So for each rya loop knot you're going to be using two warp strings.
This is probably the easiest way to do it and this is what I'm going to use for my final
design.
For me, because I'm creating a circle, I'm going to be following the line so I'm going
to be going across and when I meet the mark I will then go in the other direction.
So I'll just be going back and forth horizontally to create the circle.
I just eyeball it, I don't really count warp strings very much, sometimes I do, but in
this case I'm just going to eyeball it and as soon as I reach that blue mark I'm good
to go.
So I'm going to start at the bottom, probably, I don't know, over here somewhere, I'll grab
these two and we're going to create a starter knot first.
So what I've done is I've actually grabbed a whole bunch of yarn, just bunched it up
here and these are the two end pieces and we're going to do our starter knot.
So you're going to grab two, you're going to put the yarn over top of two warp strings
and then you're going to be going underneath the first warp string like that and then on
the other end you're going to be going underneath the second warp string and you're just going
to be taking all of that yarn and then you're going to pull it all the way down and that
creates your starter knot.
Now this end piece I don't really want sitting out here so I'm just going to tuck that in
behind the warp.
So that really kind of helps secure it and that's the start.
Now to create your first rya loop, again, you're going to be working two at a time.
So first you're going to take the first one and you're going to take your yarn and go
underneath that warp string and this is going to be your first loop.
So you pull on that and then I'm just going to leave little loops, these are going to
be small little loops.
So you can kind of see that first loop that's been created.
And then I'm going to take the same yarn and I'm going to be creating a C shape, that might
be a good way to look at it, going arcing in this direction.
And I'm going to be taking that second string, so you can see the first one where the loop
has been created, and then here's the second one, and I'm going over top of it like this
and I'm going to pull it out, go underneath and pull it through the center, and then hanging
onto this loop I'm going to pull down.
And then there's the second knot right next to the first knot and there's my first loop.
So you can see I'm working two warp strings at a time and this is where the knots are
created and the loops are created between.
So that's how we're going to make our way across.
So again, here are the next two warp strings that I'm working with, I'm going to be taking
the first one, pull it out a little bit, I'm going to be taking this yarn that I'm working
with, just one you see where it is here, and I'm going to be feeding it underneath,
pulling it, and this is going to be that loop that I'm creating.
And you can decide how big you want the loop, if you want large loops and you kind of want
to create a cool textured weave, go for it.
I love big floppy loops, I think they look great.
In this case I'm making tighter loops so there's going to be a textured look but they won't
be too too floppy.
So you can kind of control how big you want the loop to be just by pulling at this.
So in this case I kind of want it to match closely to this other loop, so you can see
the first loop, the second loop, then I'm going to be creating that C shape again, going
in that direction, and then I'll take the second warp string of the one right next to
it, and then I'm going to take my yarn that I've got all bunched up at the end, and I'll
go underneath in this direction, and hanging onto that little loop at the bottom, just
so it doesn't come undone, I'll pull and I'll create the third knot.
And you can see here's my first loop, here's the second loop, and then here's the third
knot.
And then you just keep going in that same direction.
So that's basically how you would do that.
Now I'm just looking at it right now because I'm trying to create that circle.
I think I've reached the edge, although I could maybe go another one over, it's kind
of hard to tell.
Yeah, I think I'll go one more over.
So I'll take my yarn, create that next loop, it doesn't have to be exact, sometimes it's
nice to see it a little bit off.
Go to the next warp string, making that C shape again, remember we're making the C shape,
you're going to go underneath, through the middle of the C shape, pull down, hanging
on to the first loop, and then there's the next knot.
And the knots are great because it keeps it in place, and I really like weavings that
are just well done, well made, and everything is nice and tight on the actual loom, or on
the warp.
So once you've created your row, then what's really important to consider when you're using
this kind of technique is you always have to eventually go back to creating basic tabby
or plain weave.
So underneath these loops I've got plain weave going.
And plain weave is a really important technique to use to keep the weaving together.
I've discovered early on that really you have to figure out ways to continue to use the
plain weave to keep it all together.
So once you've created one row of your loops, which are pretty secure, but if I were to
create an entire section of loops, it would actually loosen my weave when I took it off
the loom.
So then what you do next is just create a row of plain weave.
So I'll just basically feed this up and down, and so for those of you who are not as familiar
with plain weave, that's really the basis of all weavings, is the plain weave where
you go up and down every other warp string.
So these are the warp strings.
So you really should do one row of plain weave once you've created one row of your rye loops.
This will create a more sturdy weave.
And then I usually take a fork to bat it down.
I haven't gotten too fancy yet with all of my weaving tools, but I think it really works
for me.
So here I'm going to be doing the same thing.
Now here I ended my row just a little off here.
So our first pair of warp strings were right here.
This is where we created our first knot.
You can start here if you want to.
It really doesn't make a huge difference once you've created a row of your plain weave.
But in this case, because I'm kind of moving this shape out, I'll end up a little further
out.
So this is the pair of warp strings that I'm going to be using now.
Principle is exactly the same though.
So I'll go underneath to create my loop and kind of keep it nice and small, nice and tight.
And then I'll go to the second one.
In this case, I'll be creating a C shape.
You'll pull that warp string and go underneath and through the middle of that C, hanging
onto that loop that you've created, and then you'll tighten the knot, and that's what keeps
that in place.
And then, you know, you just kind of make your way across using the same technique.
People often wonder when you get to the end of your yarn bunch, you know, how you handle
that.
So for this, we're just going to create one more loop and knot.
So here's the loop.
I'm going to create a knot and pull that down.
And then I don't really have enough really.
I mean, I could create maybe another row of tabby, but I'll just show you when I've got
this, gotten to the end piece.
Just tuck it in behind, and it doesn't really matter where you tuck it in.
I'm not going to tuck it in here because then it's just going to fall through to the bottom.
But I'm going to tuck it in where it'll sort of stay above, up top, where there's something
to kind of hold it in place.
So I'm going to tuck it in here like that.
And you know, once you create more loops and more rows of plain weave, then really nobody's
going to notice that.
And at the back, when you're done the project, you can just weave this into the back of the
piece, and then it'll just disappear.
You won't notice it at all.
So that's basically what you do.
You just kind of tuck it in.
Just the same way that we did when we started the project for the first knot, we tuck the
piece back, and we'll just weave it in at the end.
And we do the same when we run out of our yarn.
So here's some more yarn, here's another bunch of yarn, and then we just start again.
In this case, we're going to be going across to create some more rows of plain weave.
So let's see, I'll start with the yarn at the back, and then I'll weave over and under,
so every other warp string.
So I'll go under every second warp string to create my plain or tabby row of weaving.
Let's see, maybe another one.
And because this is the end piece, I'm going to be really careful not to pull it out all
the way.
I'll take my fork and bat that down.
Okay, so again, I'm just eyeballing it.
I see that there's the mark that I left, and that's where I think I'll move on to next.
Now at this point, I've gotten about one third of the way in creating my rye loops,
and I've also gone ahead and done some plain or tabby weave across the sides here.
And the reason I've done that is because at various points along the way, I'm actually
going to weave a plain weave all the way across.
Probably I'm going to do one, two, maybe even three.
And the reason I want to do that is because I want to prevent this very large portion
of the rye loops from kind of spreading outwards once it's off the loom.
When it's on the loom, it can be really deceptive.
It looks like it's going to stay exactly where it is.
But because you don't have your tabby weave or your plain weave to kind of secure it all
the way across, this big mass of rye loops will actually sort of end up spreading out
because there's nothing really holding it together.
And I'll just show you, I actually did something similar.
This is a rye knots tutorial that I actually shared on my blog.
And the one difference between the rye knots and the rye loops is that there are no loops.
It's just kind of like a shag along the front.
And so I'll show you what it looks like on the back.
So along the middle, I actually did plain weave all the way across from edge to edge.
You can see the white going all the way across.
And that's what actually holds it together.
If I didn't do that, then this actually would kind of bulge out in the center
because there's just such a mass of those rye knots there.
And I actually shared my experience of not doing that on a similar weave on that same blog post.
So I'm going to leave a link in the description box just to show you what happens
or what needs to happen to prevent that.
And that's just a picture tutorial.
But this one, I'm actually going to show you what I do.
So I did a plain weave up to here.
And then I'm just going to take it all the way across from edge to edge,
just like this, going all the way across.
And then I'm actually using my Susan Bates five inch needle.
And this is great because a lot of weaving needles are about three inches long, and they're great.
But you don't get across the warp as quickly as you could with a longer needle.
So this one really comes in handy.
And I'll leave a link in the description box so you know where you can find one of your own.
It's really inexpensive.
I think I might have paid, oh, I don't know, maybe $5 for it.
I don't know.
You'll have to check the link when I do link up.
But yeah, it was really inexpensive.
And of course, as always, I create arcs as well.
And that just prevents the weaving from being pulled in.
If you end up doing a tabu weave or a plain weave, where it just goes all the way across
and you pull it tight, you end up having an hourglass and you don't want to do that.
So you create arcs along the way to kind of create a looser weave across.
And then you just use your fork to push it all down.
And then from here, I'm just going to continue doing some more raya loops.
And then I'll then do another plain or tabu weave across,
maybe one or two places just to kind of give it added strength.
And this isn't going to show through.
Once I start creating more loops, it's just going to like disappear into the background.
So now that I'm done, I've got this last little piece that I just
tuck in behind and I'll weave it into the back.
And then I just finish this off by creating more rows of tabi
or plain weave, as it's also known, and make my way all the way up.
I hope you enjoyed today's tutorial.
If you did, come and visit me at prettyfix.com
or follow me on Facebook, Twitter, and Pinterest.
Until next time, bye for now.
