JAbcA5SZLNs.

A Pretty Fix
16 followers
7 Video Views·Nov 15, 2022
Hi everyone, it's Jellica from A-Pretty-Fix.com and today I want to show you how I made this
fresh green winter wreath that I think is just perfect for both holiday and winter decor.
And if you've never made a fresh winter wreath before, then you're going to want to watch
the entire video to catch some of my tips and tricks for creating a well-structured
wreath and one that lasts.
So stick around.
You'll need the following supplies.
A wire wreath form, mine was a 14 inch, garden clippers, wire clippers, and 22 gauge wire.
For my wreath, I used an assortment of greenery, including this shore pine, I used a few boughs
for this, as well as this beautiful golden cedar, I just love the yellow tips.
I think it just creates a beautiful look.
This is noble fir, it has a nice bluish green, and I also used some berry juniper, I love
those bluish berries right on the ends.
I also decided to pick up this faux greenery that I absolutely fell in love with.
I thought it would add just the right bit of interest to my green wreath.
Now once I removed all of the elastic bands holding all the boughs together, then that
was the time to begin sorting through all of my materials.
The first thing I began to do is to clip off pieces from the shore pine.
This is going to create the base of this particular wreath.
If you're not sure how much you actually need for the base of your wreath, then I would
suggest that you take the clippings and create a loose wreath form, and that'll give you
at least some idea about how many clippings you will need at minimum.
Now continue to clip off from the other boughs, knowing that you're going to be using just
a little less of each of them because they're going to be forming the top layers or the
embellishments of the wreath.
Once I created the piles of fresh greenery for my wreath, I decided to take a few clippings
from the faux greenery, focusing mainly on some of the larger and smaller eucalyptus
that I thought would look really pretty with the fresh green wreath.
Before attaching the greenery, the first thing you're going to want to do is take your 22
gauge wire and attach it to the wire form.
So you know, there's no magic formula to this.
I just take the end and I weave it in and out of the wire wreath form and just secure
it as best as I can.
Probably the thing that you'll want to do is wrap the wire around two, three, maybe
even four times and just make sure that it's on nice and tight.
So in order to attach the greenery, you're going to create bundles and each bundle will
be attached separately.
For my bundles, I'm creating layers, starting with the shore pine, working my way to the
golden cedar, the berry juniper, a bit of noble fir, and some of the mixed faux pieces.
And this is the final result.
This is going to form the first bundle that I'm going to be attaching to the wreath.
So taking the same paddle wire that's already attached to the wreath form, I wrap it around
the first bundle minimum two, but really three times just to make sure that it's wrapped
on good and tight.
Next, you'll want to attach another bundle at the base of the first bundle and then attach
that the same way you did the first bundle with the paddle wire, going around the base
of it at least two, three, maybe even four times.
To make sure that this wreath turned out really fluffy, each bundle is pointing in an opposing
direction.
So with the first bundle, I have it pointing just slightly in towards the center ring of
the wreath.
The second bundle is pointing just out towards the exterior of the wreath form.
And then this third bundle I've got pointing inwards just slightly.
And I'm going to continue alternating that way for each bundle all the way around the
entire wreath form.
When you reach the end of the wreath, you'll notice that there's a little bit of bare space
that you'll want to fill up with another bundle, but it'll be hard to fill it up with this
size of the bundle that you started with.
So just gather up a small bundle into your hand and then attach it to the wreath.
And if you need to add another small little bundle, you can do the same thing.
There's really no right or wrong way to do it.
So here I am gathering up a second small bundle to fill up that bare space along the bottom.
Adding that last bundle of greenery to the wreath form can be a little bit tricky.
You've got bundles to the right of you and bundles to the left of you, and wrapping that
paddle wire without crushing the fluffier bits that are showing through is a little
bit tricky.
But just be very patient with yourself and maneuver that greenery as best you can and
keep that wire tightly wrapped around the bundle.
Speaking of which, one of the reasons why you really want to make sure that that wire
is wrapped around each of the bundles tightly is because, well, you're using fresh greenery
after all, and over time that greenery will begin to dry out and each of the bundles will
begin to shrink ever so slightly.
So you just want to make sure that each bundle is secured as tightly as you can get it.
So once you've secured your last bundle on the wreath, you'll want to take your wire
clippers and clip off the wire, and then you're going to take the end of that wire and you'll
want to wrap it around the wreath form and maybe tuck it in underneath and wrap it around
some of those rings that are on that wreath form.
In fact, this is the one and only time I've actually clipped the wire, meaning I've used
one continuous wire to attach each and every one of the bundles to the wreath form, creating
a very secure wreath.
And here's a view of the tail end of that wire attached to the wreath form.
You see, I've just kind of looped it around one of the rings.
Now just before I hang the wreath on my front door, I'm going to be spraying a product on
it called Wilt Proof, and Wilt Proof is supposed to help fresh greenery retain its moisture
just a little bit longer through the season.
Now you can spray this on or even just spritz it with water, whichever you choose to do
is fine, but I'll leave a link in the description box below in case you're interested in using
this product for your fresh greenery.
So here is that same wreath exactly six weeks later, and as you can see, it's starting to
yellow, but it's not doing too, too badly.
I just added a ribbon and some bells, and I just think it looks perfect for our front
door.
If you like this video, then give it a thumbs up and consider subscribing to the channel,
and I will see you all in the next video.
