Hey everyone, welcome back to my channel The Crafty Quinn.
My name is Megan and today I'm going to be showing you
three high-end outdoor fall decor projects.
Fall outdoor porch decor, in fact.
So I'm going to be working with a variety of materials,
especially in DIY number one.
It is a mix of materials, very different than what I normally do,
but I am, just to show you starting out here,
I am working with these five below stacking pumpkins
and it was $5 for these two foot tall stacking pumpkins.
Now they all fit nicely on top of each other.
As you can see, they are hollow,
which explains why they are $5 for this.
But like I said, so the top there is actually how they sit
and stack on top of each other.
So you can easily take them apart
and fit them all back inside the large piece there.
So I definitely liked the colors that they were painted,
but I wanted to use a different color on the bottom one.
But I grabbed this container from Michael's.
I got it for 50% off.
So I got it for around $17.
I definitely splurged in this video
because I wanted to show more high-end pieces
as opposed to a lot of my normal Dollar Tree crafts.
But I wanted to try something different,
you know, mix it up a bit
and use some other materials besides just Dollar Tree.
So as you can tell,
I am just trying to make sure I fill this pot.
I was just worried about, you know,
I wanted it to be heavy, at least on the base.
So I just decided to put actual dirt in it.
After, as you can tell in the last clip there,
I did put some paper in there
and I wanted to kind of see
if that would help take up some of the room
so I wouldn't need like a ton of dirt to put on top of it.
But I grabbed a bag of this gardening blend
because I figured I could reuse it for our garden later on.
I ended up grabbing three bags of these from Walmart.
Only needed one.
That was enough because of how the bottom pumpkin,
this large piece here, sits inside of this container.
It actually fits so nice
that I didn't need to fill it all the way to the top.
So I really did like, you know, the colors that they were painted
but I liked this moss color more
in combination with the other two pumpkins.
So as you can tell,
I painted the very bottom pumpkin in that green moss color.
I had to do a few coats of that
because it just wouldn't quite cover
and I would shine a light through and you could just tell.
So to give this more of a rustic look,
you know, it already looks kind of rustic
with this copper container that I put it in,
I decided to take some Spanish moss
and just kind of put that in between each pumpkin.
I don't have it, they're not, you know, glued down exactly.
I think I might still be able to take these apart
but I did spray paint all three of these pumpkins
with some clear protecting spray paint from Rust-Oleum
just to make sure that they would last in the, you know,
in the weather outdoors
but also with the green pumpkin especially,
I heavily coated the green one in that protective spray
just to make sure that it would last
and the color would not fade
because I did hear from folks that they were hearing that,
well, that they tried out these pumpkins before
and that some of the colors had faded.
So I wanted to kind of give it a shot
and try with a clear protective spray
and I don't know if they got these colors in particular
but I think folks that got the orange stacked pumpkins version
of this were having some trouble with the color staying.
So at the top here, I was just wrapping this stem
with some jute twine.
It was not going the way I wanted to
so I was a little frustrated
but in the end, it all worked out
and I just threw together some pieces of ribbon
and some raffia and just tied them all up
and made a bow that way
and I glued it to the very top of the pumpkin.
So DIY number two, this one's a little bit more complicated.
So this is my gigantic witch's hat.
If you saw this on my Instagram,
I am so excited to show you this one in particular.
I saw all these people this, you know,
this fall making these ghosts,
these freestanding ghosts with this tomato tower.
Well, I decided to use it for something completely different.
I don't, I don't think I've seen anyone do this yet.
I really hope this is, you know,
my completely novel idea here
but so I took one of those tomato towers
and I decided to make a witch's hat.
So as you can tell, I'm bending down
the very top piece of this
and there's my kitten, Eddie,
who you'll see cause trouble throughout this entire video.
But to really make it look like a witch's hat,
I felt like, you know,
the top of it has to be kind of curled over
and it, you know, of course,
maybe if it was pointed all the way,
then it would still look like a witch's hat
but I really wanted this to be, you know, distinct.
So I figured let's just kind of
take the edges of this tomato tower
and just kind of curve them all the way
and then I zip tied them together.
And by the way, this zip,
this tomato tower was about $7 or $8 from Lowe's.
And then I needed some bulk cutters
to cut off the last,
the very last hoop of this tomato tower
but the purpose of that was to make sure
I had three legs to insert this
into our mulch in our, well, our front lawn
cause that's where this sits
but the end piece here was going to make it
very difficult for this to sit.
So these become three stakes
for it to fit in the ground.
And sorry for the, for the awkward views here
but I had to film this in portrait mode
because, you know, something like this
was just way too tall
to be going on my crafting table.
So I'm like, okay, I'm going to do this on the floor.
So I plugged in the lights
just so you could kind of see
how they would look all lit up here.
So what I did was I actually ended up having
the piece that doesn't get plugged in
the piece that you don't use with these lights.
So this is a hundred count LED lights from Lowe's
and the, so the very top piece here
that you don't use
that is what you're going to put
at the very top of this witch's hat.
So the piece that doesn't get plugged in
to your extension cord
the piece that you're not using
the end of the light
that is where you put it at the very, very top.
And then the rest of it is going to go
through the, you know,
wrapped around a few times,
obviously these hoops
and just kind of make sure it comes out at the bottom
and have it at the very back of this.
It was a very, very tedious process
to wrap these around
so I didn't show the whole process here
and I was getting so frustrated with these lights
I wouldn't have wanted to show you that footage
but just know that you just wrap it completely around
the loops there, as you can see.
And also it just took some time
to kind of figure out the placement of these lights
and how I wanted them to look.
So once I had the lights sitting inside the hoops
that is when I took this gardening fabric
and I kind of wrapped it around
and then kind of held it up.
I'm like, okay, this is how much I seem to need here
but you just kind of wrap it around a bunch
and kind of see where,
see where you need to cut it
kind of based on how,
if you can wrap it all the way around
and make sure it covers the whole thing.
And then, you know, I definitely made sure
that it was held in place at the very top
using a staple.
Actually, I used a stapler to hold this fabric
to the very, very top piece,
the piece of this tomato tower
that's metal and completely curled over.
That is where I stapled it first
and then kind of worked my way down.
And then as I realized I had excess pieces
that is where I just glued and I cut
and so I would just kind of keep gluing,
keep cutting and apologize
for my cats playing back there.
I know it's a little distracting
but of course they had to do this
right in the middle of me filming.
I promise no fur was flying.
My kitten just likes to annoy my older cat
and kind of instigate things
as you can tell back there.
He likes to instigate things with my dog
and my older cat.
Oh my gosh.
I know it really looks like they're going at it
but that is literally just how they typically are.
And then my kitten Eddie,
he just keeps coming back for more.
This was definitely a hard project.
I had to eventually put him in another room
because he kept kind of like diving
at the witch's hat
when I was trying to wrap it around
and cut it and glue it.
But as you can tell there,
I took that 19 inch hoop
that you saw on the table there
and I just kind of cut
kind of a large circle around that circle
and that was just the best way
that I could get the biggest piece
of round fabric that I could
for the base of this witch's hat.
So the metal stakes of this witch's hat
go through the round piece at the bottom
so it really looks like a hat.
And this is what it looks like
when it's all lit up.
And what's great is that during the day
this fabric is not sheer enough
that you can see the metal pieces during the day.
It completely covers it up.
You can't even tell that they're in there
which is great.
And then I made a witch's broom
out of a bunch of sticks behind our house
and just tied it up with a bunch of jute twine
and got some hay bales.
And then this is what it looks like
when it's all lit up.
But when it's darker,
it'll look a little bit more
covered up and you won't see the metal as much.
So this is just your midway reminder
to subscribe if you haven't already.
Please check out other videos on my channel.
Make sure to follow me on Instagram.
And thank you guys so much for watching this video.
There's one more craft
and then we are at the end.
So DIY number three.
So this is a wreath that's about to go
on my new front door.
And I've been wanting to make something really pretty
ever since we just got our new door.
So we are going to take this 19-inch hoop from Michael's
and we are going to take this pumpkin wreath wireframe
from Dollar Tree and we're going to pretty them up.
So I just kept thinking, you know,
how cool would it be if I were to kind of make
the wireframe the centerpiece of a larger wreath.
And actually a wreath from Target inspired me
a little bit for this craft.
Even though the wreath looks absolutely nothing like my wreath.
It's just kind of like, you know,
you see something and it gives you, you know,
an idea to do something,
but it ends up being completely different
than what you were thinking.
So Eddie just kept causing trouble
throughout these crafts.
It's so hard to craft these days with a kitten,
especially when he wants to do everything that I do.
He has to be involved in everything that I do.
I love him to pieces,
but he just is very, very active right now at this age.
So this is some thicker jute twine from Dollar Tree
and I got two packs of these from Dollar Tree
and then I ended up needing just kind of like a,
literally maybe about an eighth of like a third pack.
So I did in total need three packs of this thicker
twine from Dollar Tree,
just so you're aware of how many materials
that you'll need for this wreath,
just for this part,
for at least wrapping it around the 19 inch hoop
from Michael's,
but I wrapped it completely around
and I didn't want to show that whole process
because it is just so tedious,
but as you can tell here what I'm about to do,
I am just gluing it and then I'm wrapping it.
I'm gluing it, then I'm wrapping it.
So this was a very, very long process
and then of course,
right at the very moment when I was about,
I had just glued it,
Eddie decided to just completely just jump
and charge at the wreath right after I glued it.
So, oh my god.
Oh my goodness, you guys.
If I can't get a video out every week,
this is why.
It is so hard to craft with a kitten.
Especially one as energetic as Eddie.
Oh my goodness.
So yeah, he's definitely even more involved
than the crafty kitty was at his age.
It's so funny because my cat Marcus,
who most of my subscribers know as the crafty kitty,
he is just completely just calm and just lazy.
He's in his like lazy cat days
and Eddie is just the complete opposite
and so he's instigating things all the time
and definitely trying to get Marcus to play
and you know, Marcus is definitely not always down for it,
but at least he brings out Marcus's playful side.
So I decided to take some plaid ribbon
and kind of put that at the base of this pumpkin wire frame
because I wanted to almost have,
I don't know, not like a nest,
but kind of have a bit of a cradle here
at the very bottom of this wire frame
because I want to have pumpkins sitting inside
this larger pumpkin wire wreath frame
and in order to do that,
I needed to have a few layers of this plaid ribbon
at the very base of this.
So this part here, I'm just gluing the end pieces together
because I'm trying to cover up the pieces of the ribbon
that are all cut off
and you know, there's pieces that are kind of
coming undone here
because that is what happens
when you start cutting off ribbon.
So I did about three layers there
and just kind of glued them all to the wire frame itself
and just kind of also wrapped it around the wire frame.
So to hold this in place,
I took some very thin jute twine
and I attached it to the larger jute wreath here
and that was kind of the best way that I could secure it
and also kind of have the jute twine kind of blend in
with the larger jute twine a bit.
So I have it mostly secured by those two pieces here.
So I have it tied really tight,
but you know, it definitely does swing around
and I didn't want the wire frame to swing around
and kind of like hit my door and stuff like that.
So I decided to after, you know, after, after,
oh my gosh, I can't think of the word,
but after I wrapped it around with the jute twine,
then I did take some more hot glue
and as you can tell, it's kind of flimsy there.
So I decided to glue the wire frame
more to the larger jute twine hoop there.
Sorry guys, can't talk tonight.
So after making that cradle,
I realized that that was not enough
to keep those pumpkins in place.
And by the way, these pumpkins are $2.50
for a five pack of these really nice pumpkins
from Five Below.
So Five Below had a lot of great fall craft materials
that I could work with
and I don't know if they, you know, intended it that way,
but it just really worked out nicely
for a lot of the projects that I wanted to make.
So I did take some burlap looking,
yeah, it's like a burlap kind of ribbon from Dollar Tree
and I did use that as kind of the backing
to hold these pumpkins in place.
So that way when you're gluing down the pumpkins,
you're not only just gluing them to the plaid ribbon,
but you're also gluing them to this burlap backing.
And that is really what kind of secured them being,
being able to be glued together in two places
really helped all of them stay together nicely.
So I kind of layered this burlap ribbon
on top of the other a little bit.
And then I did kind of use more glue in between
to hold these pieces together,
just so that there wouldn't be, you know,
any way that these pumpkins could come out of them.
But everything is glued and secured.
So I had about three or four layers
of this burlap ribbon in the back.
Yeah, I think it ended up being about four layers there.
But it was so nice to be able to kind of have something
to hold all of these pumpkins in place
because I was gluing the pumpkins to each other.
I was gluing them to the plaid ribbon
and then I was gluing them to the burlap as well,
the burlap ribbon.
So they are all really secure
and they are not going anywhere.
And then it was definitely tough to kind of try
and fit this last little tiny pumpkin in there as well.
But because of that backing,
that really helped kind of have a little bit more wiggle room.
And then just for a final touch here,
I had a bow.
I just kind of took four large loops,
about four inches a piece.
So each loop was four inches tall
and I did four of those loops.
And then I just took some floral wire
and just kind of wrapped that around the base
of those four loops
and just kind of pulled them apart
into making that larger ribbon there.
And then of course,
you want to leave some kind of end pieces there
for the ends of the ribbon.
He tried to get one more attempt to take my wreath apart
because he really likes playing with those pumpkins.
He stole a couple from me as I was making this.
So then I used a faux leather harvest tag from Dollar Tree
as kind of the finishing touch in that ribbon that you see there.
I couldn't wait to use those faux leather tags on something
and this worked out perfectly.
So this was definitely a mix of Michaels and Dollar Tree
and Five Below materials to make this wreath.
And this is how all of my fall decor turned out this fall.
So I've had so much fun making all of this
and we're just going to keep adding onto our display
as the fall season goes on.
Thank you guys so much for watching today's video.
If you want to check out more videos,
watch them here on the left
and let's keep in touch on Instagram.
Have a good night.