Tundra Overland Build - PHASE 2

The Cheerful Traveler
11 followers
4 Video Views·Nov 9, 2022
Tundra Overland Build - PHASE 2
This is my 2022 Toyota Tundra Limited
with the TRD Off-Road Package.
Since the end of December when I bought it,
it has been modified for use off-road and on overland trips.
And so far this year, as of the start of June,
it has gained almost 18,000 miles.
The build has been completed in two phases.
The first, which I did a video on in February,
was done using some of the only parts
that were available at the time,
and it was just enough to get it out onto the trails.
Since then, almost everything has changed.
So in this video, I'm gonna go over phase two of the build.
If you wanna know more about something
that I mentioned in the video,
I'll have everything linked in the description
or on my website at revereroverland.com forward slash Tundra.
And yes, this is a gear and equipment video.
The first and most obvious thing that has changed
on this truck is the color.
Originally, the truck was magnetic gray metallic,
but just days before Overland Expo West,
I took it to Adventure Motors in Kansas City
to have it wrapped.
To prepare the truck for wrapping,
we had to strip it down and remove parts.
While the guys from Adventure Motors
were removing door trim, I got started on the stickers.
Next, they worked on the grill
while I continued on the stickers.
Every little trim piece needed to be removed,
as did the stickers.
While they worked hard with the big stuff,
I worked harder on the stickers.
Even the headlights came out,
and I helped by removing some more stickers.
The colors I went for were Avery's Light Blue
with the trim done in Satin Black.
Adventure Motors work on any off-road vehicle,
but they are particularly well-known
for their 2022 Tundras.
This one was the third one that they had wrapped.
The end result was this eye-catching blue,
which is Avery's Light Blue.
It's an almost perfect match to Blue Flame,
which you can see on the Toyota RAV4.
The other noticeable thing is up front here on the bumper.
For the front bumper,
I went to CBI Fabrication in Idaho Falls.
They have two bumper options,
but I'd be getting the full-length Baja bumper.
To fit it, the front end needs to be removed and cut.
To make installation easier,
the bumper comes in two main parts.
The first attaches directly to the frame
and has tow hooks and a winch cradle.
I bought the 12,000-pound Warn VR-12S for mine.
It bolts directly into the cradle,
but the control box will need to be relocated above it.
Before installing the outer part of the bumper,
we had to attach the parking sensors.
If you're adding lights,
now is the best time to do that too.
The two-part bumper makes the whole process a lot easier
since you don't need to lift the entire bumper up
with the winch and heavy cradle.
Once it's lined up,
there's just a few bolts to attach the outer bumper.
The final step was to insert the grill
and plug in each of the sensors again.
The Baja bumper from CBI provides a lot more clearance
than the stock bumper setup,
which I had issues with earlier in the year.
It also gives protection all the way across,
which is something that's important
for when I take this on some of the more technical trails.
The bumper is designed to work
with all of the stock parking sensors,
and the radar and safety sense continue to work perfectly.
If your truck comes with the active air dam like mine did,
it will need to be removed,
and that did trigger a warning on my dash.
This is a prototype version of the bumper though,
and from what I understand,
there is a fix for that on the way from CBI.
The one winch is outfitted with Factor 55's Ultra Hook,
which is much tougher, more versatile,
and far safer than the crappy hook
that the winch comes with.
It also sits flush with the fairlead here,
and that stops you from gouging the metal
around the outside of the fairlead with the hook,
which could damage the synthetic winch line.
It's also orange, which matches my theme.
Originally, I had the Tundra-specific light kit
from Heretic Studio with their fog light replacements
and the 20-inch bar in the middle,
which all fit perfectly, and I really, really liked them.
With the CBI bumper, none of them fit,
so I traded them in, and I actually cut off the bumper
and turned it into Heretic
so they could use that for a display,
and traded it all for some lights that would fit.
In the middle, we've got Heretic's 30-inch light bar.
On the outside, there is a pair of the four LED Quattros
and a pair of the two LED BA2s.
Once again, I went with the true amber lights
for the low-down lighting.
I tell everyone it's because the longer wavelength
of the amber light reduces the refraction
in dusty conditions, and it doesn't reflect
as harshly off the snow, but everyone knows
the real reason is because it looks the best.
Just up the grill, I've also added a few of the decals
from TVD Decals, and these add about 10 horsepower each.
Moving back, we've also added ditch lights.
There are a few ditch light brackets on the market,
but most of them seem to be really cheap U-brackets
that's suddenly worth over $100 and require cutting
or removing the trim piece
at the base of the windshield here.
This one from CBI is the only one that I've seen
that doesn't need any cutting or trimming
since it bolts into the hood mounts
under here in just a couple of minutes.
Once again, I've gone with the four LED Quattros
from Heretic Studio, and all of the lights
on this truck are a combo beam pattern,
so they're half flood and half spot,
but I do feel like I probably should have gone
with pure flood lights for the ditch lights.
They're designed to point slightly out,
and having a spotlight just doesn't make any sense
in this application.
For the lights above the hood level,
I've gone with the white light.
If it's dusty or snowy, I'm not going to be using them
anyway, and as much as I like amber lights,
the white lights have the most light output.
You're not going to be filtering out any light
like you would be with the amber lenses,
and you're going to get more light reflected
back off what you're looking at.
While I was at CBI, we also installed these rock sliders.
They're the kick-out style,
which is great for providing extra protection,
but also gives my wife something to step up on
when she's getting in and out of the truck.
This is definitely something I've been wanting for a while
since I've been very nervous
about damaging the rocker panels,
considering the extra length
and poor break-over angle of this truck
when compared to something like my 4Runner.
Underneath, we also added the full Overland skid plate set,
which is a huge improvement
over the single, tiny, plastic skid plate
that the truck came with.
And I know people say ballistic-grade nylon or whatever.
It's still plastic, and it's still really, really small.
So now I have full protection
all the way from the front bumper back to the transfer case
with everything except for the fuel tank covered underneath.
Inside the truck, you'll have to excuse the mess.
We've been on the road a little over five weeks now,
so there's stuff everywhere.
But I do have a few things going on
that are worth showing you.
First of all, underneath the driver's seat,
we have the seat jackers
and multi-mount panel from Desert Does It.
The seat jackers allow me to lift the entire seat up higher,
which gives me a more truck-like driving position
and really helps when driving off-road
because it allows me to see over the hood
a little bit better.
The panel also gives me a place
to mount both my fire extinguishers
as well as a magnetic panel that I put my multi-tool on.
I also have several things for communications up here.
The first one in the middle here
is my Icom 2730A ham radio,
which goes to a Comet SS680SB antenna.
And I chose that one because of the built-in spring
that helps it deal with brush
and low-hanging branches catching on it.
The microphone here in the middle is held in place
with a steely magnetic phone mount,
which attaches to the wall there.
You probably also noticed the other antenna
that I got sticking up from the truck,
and that is the WeBoost cell phone booster.
And it really does work,
and it is great for when you're working remotely
since it gives a stronger usable cell phone signal
and just opens up more places for us to camp
where we can work.
Unfortunately, there are still gonna be times
when there's just absolutely no cell phone service,
so it can't be relied on 100%,
and it's not good for emergencies.
For that, I use the Spot X satellite messenger,
and this thing can be used for tracking
or getting ahold of people
when there's just absolutely no cell phone service at all.
It also has a giant SOS button on the front,
so if I need to send out emergency signals
and get rescued for some reason, I can push that.
Most of the time, it's just used for tracking.
My parents enjoy tracking where I am
and making sure that I'm still alive.
It is nice that they keep tracking me
when I'm completely alone
because my wife just doesn't bother for some reason.
It can also be used to send text messages to any cell phone,
which has been very useful
for when I'm outside of cell phone service
and I need to update someone or ask some questions.
We did just also order the Starlink RV service,
and that's going to help us work absolutely anywhere.
It hasn't arrived yet, but I am really excited about it.
I am really looking forward to it
because there have been a few times on this trip
where we have struggled to find a campsite
with enough cell phone service
for my wife to attend her meetings.
In the back, we've made some big changes.
The back seats are actually gone completely,
and they are replaced with the seat delete system
from SHW Off-Road.
Unfortunately, I can't really show you it right now
because it's covered with basically everything,
all the stuff we've brought for us on this trip.
We've got about another week left,
so about six weeks worth of stuff, plus the fridge.
The system is made up of four parts.
So you've got the two bases and the two back panels.
It is possible to just get the bases.
So if you just want a platform for your gear
or for your pets,
then that's definitely the most economical option.
But then you end up with the smooth plastic back panel
that just comes with the Tundra.
It doesn't look bad, but it's not functional.
So I really like the back panels
that come with the SHW Off-Road system
because you get that MOLLE panel storage on the backs.
Something that's worth knowing is that
if you do go with the 60% back panel
and you have the JBL music system or sound system,
then you will have to remove the sub for the JBL models
to get that MOLLE panel fitted in.
This is probably one of my favorite mods
because it makes the storage and organization so much easier.
The flat top of the seat delete
allows me to stack up so much stuff,
like the luggage, I've got the fridge in here,
tons of flat storage space.
And the fact that it's contoured
to the door panels along the edge
means that I don't lose stuff down the sides.
Underneath the seat delete,
you still have access to the storage box.
I've been using it for things
that I don't need to get too often.
So I've got things like my jack and my tools under there.
And then the other two lids in the front
give new storage cubbies that are created by the delete.
The one on this side is used for my wife's books
so she can just lift up her duffel bag there
and get her books out while we're traveling.
And then on the other side,
I have my dual battery set up in there.
The whole battery system is basically managed
by the Redhawk management and distribution system.
It's a really high-end system that does a lot of stuff.
On the top, I have the manager 30,
which charges the batteries using the alternator,
120 volt shore power, or I can add solar,
but I haven't done that yet.
Underneath that is the RedVision distribution system.
And that's what sends power to all of the multiple outlets
that I have all over the truck.
Each of the outputs are independently fused and controlled
using either the cell phone app
or the RedVision screen that I have mounted in the front.
The batteries that power everything
are two 100 amp hour Lion Energy
lithium iron phosphate batteries,
which provide more power than I've ever needed.
It can easily run both mine and my wife's heated blankets
all night long in the tent.
In fact, probably could do it for a couple of nights,
or you could run a fridge for a week or more
depending on the ambient temperature.
I have multiple outputs throughout the truck.
On the back panel,
I have Redox 1000 watt pure sine wave inverter,
which can actually be controlled
through the RedVision screen.
This will actually be hooked up to two outlets
that are at the front of the seat panel or seat delete,
sorry, as well as a roof output
that I'll show you in a minute.
I also have two 12 volt outputs,
again, at the front of the seat delete,
which is great for charging drone batteries
and other accessories.
And I have one that's on the roof
and another that is planned for the back.
Up here on the roof is one of the outlets
that I like the most.
I've run a 120 volt outlet and a 12 volt outlet
up here to this black waterproof box
so I can plug in when I'm in the rooftop tent.
All I have to do is unzip the window and reach out.
The 120 volt outlet allows me
to run the heated blankets all night,
and then the 12 volt outlet
is great for the pump for my mattress.
Before I added this little box,
I'd have to run an extension cord
from the back seat every night
and then shut it in the door.
And for the pump, I'd have to bring a little battery pack
like a Jackery up.
In the truck bed,
we have added the SHW off-road drawer system.
This was one of their very early prototypes
and their latest system looks completely different.
So I don't want to show you too much of it,
especially since we actually tried our best
to break this one to test it out.
The good news is that even before
the improvements were made,
this thing was very difficult to break.
We actually tried jumping in the drawers,
we were throwing heavy loads on it,
but ultimately we had to leave it unsecured
and get it airborne before we had any damage to it.
There are still several things I really like about this one
that will be carried over to the final design.
One of those is that this is specifically designed
for the Tundra.
They do actually have another system for the Tacoma
and one for the Gladiator as well.
But this one is specifically designed for the Tundra.
So these drawers use every single inch
of square space available.
Another thing I like is that the drawers are fully extending
so you can get to the far end of them easily.
And finally, I just like how light it is.
The system is made out of a lightweight fiberglass composite
so everything together comes to about 160 pounds in total.
On the bed, I now have CBI's roof rack height bed rack.
If you watched my previous video,
you know that I had the CBI crossbars previously
and the tent overhung the back.
Now that this is roof rack height,
I've been able to move the tent forward
so it no longer overhangs the back of the truck.
It is worth mentioning that the bed rack
is exactly the height of the roof rack.
So if you are gonna do the same thing that I've done,
move that tent forward and you have a roof rack on the front,
you will still need to raise the tent up a little bit
to allow for a little bit of flex and play in the bed.
I did that by flipping over the front
and the back crossbars on the bed rack system,
but I've seen other people use special tent mounts
and it raises about an inch.
The bed rack has multiple points
for attaching accessories down the side.
So you can add things like rotor packs or traction boards.
I will probably move my traction boards down here
to this side at some point so they're easy to get to,
but I do like that I can just reach in
and grab my stuff through the gaps on the side there.
Another thing that I like is that at the base of this,
along where the track is in the bed,
it has little hoops that are the perfect size
for ratchet straps so I can strap things like my water
and my propane in on the far side
so they're not rolling around while I'm driving.
On the top is the iCamper Rooftop Tent.
I did do a separate video on that
and the new inflatable mattresses that they have.
So I'll just put a link to that in the description
rather than go over everything again.
The only thing that has changed
since I did that video is the mounting.
The second generation mounting system from iCamper
won't actually work with these CBI crossbars
so you'll want to get the first generation mounts.
I did let CBI know about that problem
since their bars are only just a little bit too thick.
So hopefully that's something they change
in their future models.
One of the more subtle yet effective changes
that I've made is to the suspension.
The Westcott Designs Lift that I had on there previously
was a quick and an easy fix to fit larger tires
but it's best suited to light off-road use
or for street use.
For long distance off-road use or for overland use
on rough roads or for anything that requires
a decent amount of flex,
you'll need a full suspension replacement.
For that, I went with the Adventure Motors Lift
and it is a great option.
All right, so the wrap is done and I am a huge fan.
It is really bright, especially out here in the sunlight.
We've brought the truck up to the main shop
here at Adventure Motors now where we're gonna do a lift.
So we just finished up installing,
I guess what we have dubbed our Adventure Motors Combo Lift.
What we have on the back here,
since Rob's got a pretty heavy load,
we needed to have a coil in the back
that would adequately support the weight,
still wheel well and get the lift height
that we want it to get.
So what we have on the back here
is a set of Dobinson's coils.
Paired with that is the Dobinson MRR adjustable shocks.
And then we've got our designed
and in-house fabricated sway bar drop brackets
so that we can get the sway bar
kind of positioned back to where it needs to be
so the alignment on that's nice and healthy.
Dobinson's Panhard bar in the rear,
as well as, you probably can or can't see,
but some extended brake lines
that we manufactured for the rear
so that way at full droop we're not tugging on brake lines.
Kind of similar to the rear,
the front, you know, many, many months ago
and even still currently,
there is nothing that's readily available
that's on the market for an actual,
true, proper suspension lift kit.
So what we've got here is,
this is a Fox Performance 2.0 coilover.
We've got some misalignment spacers
that we had made for these
so that it meets within the lower control arm
with the correct spacing and sizing that we needed.
And then top hats that mate for the Tundra.
So, but one thing that is the same
is the bolt pattern at the top
is the same as the earlier generation Tundras,
the second generation,
as well as 200 Series Land Cruisers.
And then we've got a set of Pro Comp
tubular upper control arms.
And yeah, so we're, I think,
about ready to get this thing on the ground.
We're gonna get sway bar connected here,
put the wheels back on it
and triple check to make sure we have
everything dialed where it needs to
and the height is where we want it.
Once it was done,
the only other thing was to go get an alignment.
I particularly like the Dobertson shocks
that I have in the rear.
For rough roads,
I just move them to their softest setting
and then I crank them back up again
when I get to pavement.
That's really nice when you don't feel like airing down.
Now we're gonna move on to a few of the things
that haven't changed since the last video.
And the first is the wheel and tire setup.
The wheels are Method Race Wheels 705s
with bead grip technology.
The bead grip reduces your chance
of losing the bead at low tire pressures.
And I've actually been asked exactly how low you can go,
but there isn't really a set limit.
It just means that you are less likely to lose the bead
than you would be if you had regular wheels.
Having watched how much the tire shops struggle
to put the tires on these bead grip wheels,
I'm actually pretty comfortable with how well they'll hold.
These particular wheels are 18 inches
with a positive 18 offset.
If you wanna get some of your own,
the link that I put in the description
will actually get you 20% off any of the Method Race Wheels.
On the wheels,
I have 35 inch Toyo Open Country AT3s.
I chose these because, well,
they're actually the only tires
that were available at the time,
but I've been really happy with them.
They seem to perform really well in the snow.
They've been quiet.
They balance well.
And so far, with about 15,000 miles on them,
they seem to wear really well.
On top of the truck, we have the Prinsu Roof Rack.
And I've actually had people ask
how that works with the panoramic sunroof,
you know, whether it gets in the way or not.
And it does not.
This is actually the truck that CVI borrowed
to make sure that it fit.
You do have to drill into your roof
in four places on either side for mounting.
But the end result is that you have a very sturdy roof rack.
On the front of the rack
is the Heretic Studio 40 inch light bar.
And we've hidden the wire from that
using Casey's wire hiding trim
down the side of the windshield there.
I've also added two handles
on either side of the roof rack.
And those really help
when getting up into the cases on the roof.
The cases are from Rome Adventure Company
and they're waterproof and tough.
And I actually walk around on top of them
when I'm getting the Maxtrex out in the middle there.
There are several things that I like about these cases
when you compare them to others.
I actually had some Harbor Freight rifle cases up there
before I got these.
And one of the things I like,
one of the big differences is that these lock on the latch.
That makes them harder to force open.
With the Harbor Freight ones,
even with a lock in there,
you can just peel up one end of the lid and reach in.
These also have a strut that's built into them
and that allows them to hold themselves open.
So when you're getting stuff out,
you don't have to hold them up with one hand
and dig around with the other.
They also have some cool accessories
that you can get for these,
like the lid organizers
and lid molly panels that are available.
I have had people asking if it's actually necessary
to have boxes up here on the roof
with all of the bed space that I have available.
And the short answer is no, at least not really.
I have them up there for convenience.
I store my tent heater and recovery gear in them.
So it's all things that I want to be able to get to easily.
And I don't really want to have to pull those cases
out of the bed when I need to get into them.
So they're up on the roof.
So I can just climb up, pop them open, grab what I need.
What I probably should do
is add some of the quick release systems from Roam.
And that way I can keep them in the bed
when I'm driving across country
and then put them up there when I get to the trails.
So what's next?
Well, at this stage,
I'm really just waiting on a few more things
to be developed for the truck or become available.
I'd love to have SHW Offroad's final version
of the drawer system.
And I'm also considering having a sealed bed topper
like the RSI Smart Cap.
Another thing I'm looking for is going to be things
that make me and my wife more comfortable
while we're traveling and working.
So I'll probably end up with something
like the Ostrich Wing Awning from Rugged Bound
so that we can have some shade or shelter
from the rain while we're out traveling.
But I might also do something like the 80 Habitat
or the Skinny Guy Camper in the bed instead of the Smart Cap.
That way we actually have a fully enclosed tent
and kind of living space that we can work out of
and get out of the bugs.
As soon as CBI finishes up their rear bumper,
I'll have that on the truck too.
The plastic rear bumper is very vulnerable.
I've pulled it apart a couple of times already.
So I need something back there that's going to take the hits
and hopefully give me a little bit more ground clearance.
Other than that, I'm really happy with the truck as it is
and have thoroughly enjoyed taking it out on these trips.
Our final thing for the video is to address
some of the comments and questions that have come up
regarding the Tundra and this build.
First of all, no, the engine hasn't blown up.
Neither have the turbos.
I haven't weighed it, but it still has great acceleration
and yes, this is the best Tundra yet.
Having driven this and the second gen back-to-back,
the only real advantage the old one has
is a slightly better turning circle.
It's about 10% worse in this one.
It's not huge, but it is enough to make a slight difference
in the parking lots and on tight trails.
Now that the troll comments have been addressed,
the only real question I get is about gas mileage.
It comes up again and again.
The new Tundras do have really good gas mileage for a truck.
Stock, after breaking it in,
I was getting in the upper teens to low 20s per gallon.
Adding the boxes to the roof gave me a small hit
of maybe one to two miles per gallon,
although I didn't have them up there for very long
before I put on the lift and the big wide tires.
And I think those are what have given me
the biggest hit to my fuel consumption.
Now it does really vary depending on the speed
that I'm going.
With mixed city and highway driving yesterday
when I drove from downtown Seattle to Olympia,
I got about 16 miles per gallon,
which is actually pretty good.
If I'm sitting at 75 on the highway for long distances,
that tends to drop.
The faster I'm going, the worse it gets.
And I go down to around 14 to 15 miles per gallon.
Off-road, it also varies depending on the trail,
but on the current trip that I'm on,
where I went from Central California to Central Washington
on dirt roads and light trails,
where I was able to do around 20 to 30 miles an hour,
I averaged about 14 miles per gallon.
If you've made it this far in the video,
consider subscribing to the channel.
Only about 14% of my viewers are subscribed.
I'd love to make it to 100,000 subs.
As a bonus, you'll get to see the videos
of the Tundra in action.
If you haven't seen my latest trip video yet,
make sure you go check it out and I'll put a link to it,
like a little square coming up like right here.
Thanks for watching.
