Flipping a Hutch into Modern Coffee Bar | DIY Chalk Paint Upcycle

Furniture Flipping Teacher
13 followers
13 Video Views·Nov 5, 2022
Welcome back to Furniture Flipping Teacher. If you're new here, my name is Lauren and I am a
full-time kindergarten teacher who flips furniture on the side to earn a profit to put straight
toward my student loan debt. Today I am going to be flipping this beautiful hutch. I have been
dying to do a hutch from the moment I started flipping furniture and I finally worked up the
courage to do a hutch and I found the perfect one because this isn't a huge hutch, a huge project
like most hutches are. This one is nice and small and I think that it could go perfect as someone's
coffee bar or a little storage cabinet even in an apartment. This is going to be a super fun flip
and I'm excited to get started. I found this piece at Goodwill and it was actually marked at $79.99.
My mom was with me when we were looking at this at Goodwill and of course she loves to negotiate
so she asked if there was any way we could get a little bit of a lower price and the guy said well
if anyone is over the age of blank that they could do a 20% off discount so my mom was over that age
she's considered a senior citizen at Goodwill don't tell her I told you that and so we ended
up getting this for $65 so it was a little bit more than I normally pay for a piece but like I
said I've been dying to do a hutch and I think that I can sell this for a pretty good profit.
Let's flip this hutch. All right so the first step is going to be to remove the hardware and then we
can get to cleaning. I'm not going to be keeping this hardware I do want to get it off here before
I clean. All right so when I got this hutch we knew that there was a little issue with the door
up here so the issue is it doesn't want to stay closed up here. Okay so it locks down here but
this is just being a little booger. Well I thought it was going to be an easy fix that we would just
have to replace the magnet or straighten out the hinges. Well we tried all of that and then come
to find out this door at the top is actually slightly warped and that is not an easy fix.
So the easiest thing that we thought of is to actually take off the doors completely.
That was not in my original plan but again this door being warped is just not fixable unless we're
going to go to full extent to get this steamed and that's going to cost a lot of money and of course
I don't want to put a lot of money into my piece so we're just going to remove the doors.
I think that it's still going to turn out really well and I think that I can still pull it off.
With that being said I'm going to remove the doors. Flathead screws are just a bit tougher
to get out especially when they're old because there's not a lot for the screwdriver to grab
onto it kind of slips out pretty often so these are in there tight and so I'm working hard to
get them out. I'm sad about it but it again is the best possible thing that we can do at this point.
Second door off. The other thing about taking off the doors is that I've also got to figure out a
way to get these off which are the door thingies that hold the door in place. So I don't know what
they're called but I'm going to try and pry them out. Okay and then I'll just have to put some
wood filler down in those holes along with the holes where the hinges were because I don't want
the hinges holes showing. I've also got to figure out how to get these out see if it can be as easy
as the other ones down there. I know I always make you guys nervous with how I do things but
gotta wing it. Now that I got them a little bit started I'm going to just pull them out with
pliers. This was a little piece to stop the door. This one was missing but there is a nail back
there so I'm gonna pry that out and then pry this one out as well. All the hardware is off except
these little guys right here. I have no idea how in the world I'm gonna get them out because
they're metal and they're in there. This one seems to be a little wiggly. Oh hey I got it out.
I just pulled it. Maybe the pliers will pull it out.
Yay that was so much easier than I thought. Okay hardware's out. I'm gonna go ahead and
take out the shelves as well. I'll clean those separately. Oh yeah and when I got it this was
also not attached. It was in there so that's a good thing. It's just a little wooden piece that
goes over here to hold the bottom shelf. So I'll just be reattaching that.
These are the only pieces of hardware that I'm actually keeping to put the shelves back on.
They're kind of unique. Now I can finally get to cleaning. All right I am going to clean with some
Dawn dish soap today. It is a degreaser so it'll get out all of the dirt and grease and grime and
yuck because this piece is quite old. So I definitely want to get it clean before I do
anything else. All right and now I'm going to go switch out my water to put some fresh water and
rinse everything off and then I will be ready to fill in all of the holes with wood filler.
I'm really thinking about leaving these shelves raw wood. I think that with the look that I'm
going for it's really gonna bring it all together so we'll see at the end end but plan is to leave
them raw. All right all clean let's get these holes filled. I am going to be using the wood
filler from Minwax. I am basically just taking my putty knife and shoving in some wood filler
into all of the holes that I want filled. Then kind of scraping it off making it flat
but I do like to leave a little excess on the top that way when I'm sanding down we have enough
filler in there to become flat instead of still having an indent. I'm going to get the hinge holes
as well. Again I don't want these leftover hinge holes there because the doors aren't going back on
so we gotta fill the holes. Then on the top as well this is going to be a little bit more
challenging because we kind of got to let it stay up there so we're not going to be able to
shove it as much because it might fall. That might have to get a little dirty with our hands.
Kind of shove it up in the hole and hope it stays in there. I put tape in there but then I feel like
it wouldn't dry. Have you guys ever done this filling holes upside down? Never done it before.
Got any tips? I'm just kind of going to shove it up in there. All right that should stay okay and
then my last step for wood filler is I'm going to go around the whole piece and see if there's any
major gouges or veneer missing or anything like that that would need to be filled before I do
any other painting or sanding. Since I'm going to be replacing the hardware on the doors I also need
to do a little bit of wood filler on both doors so it looks like originally there were three holes
so I've got three holes to fill instead of just the usual two. Also right down over here there is
a little bit of missing piece of veneer here and down here on the leg so I'm gonna go ahead and
fill that as well. Again I kind of like to use my fingers and I also like to go a little bit
overboard with how much I use and that way later on I can just sand it down to the perfect shape.
And then of course you're never going to get old pieces to look exactly like the way that they did
before. They got all used so that kind of adds the character as well. I want to obviously get as much
as I can filled and fixed but kind of just the fun part of flipping furniture is it's very unique
at the end and every little crack and dent kind of gives it more character. That's at least my
opinion. So now basically we're just gonna wait it out and I'll come back tomorrow and the wood
filler will be dry and then we'll be able to sand it down and get started putting some color on.
Alrighty the wood filler is all dry and it's hardened so I am gonna grab my sander put my
mask on and get to sanding. Also I'm not going all the way down to the bare wood I am just scuff
sanding the entire piece. All right and now I'm gonna take my brush and just wipe away all the
dust then I'll grab my microfiber cloth and then that will be the final step to get all of this
dust out of here. All right so I just finished up with the details and sanding around where I missed
with the sander so now I'm gonna get all of the dust off and I'm actually gonna get out the blower
and blow all the dust off just to make it a little bit quicker and then I'll go back with my
microfiber cloth and get any remaining dust. Hopefully it doesn't blow over the hutch.
All right and that should be good. Now that'll give me a lot of extra time saved because all
the dust is blown off and I'm just gonna wipe it all down one last time. This microfiber cloth
which is kind of a stickier cloth and attracts the dust there shouldn't be too much left on it
but we don't want any on it because the paint will then adhere to the dust instead of adhering to
the surface so we need to get rid of all the dust. Now that I've got all the dust cleaned off I'm
ready to prep for paint so I'm gonna put some painter's tape on the areas where I don't want
to get painted on and I've also got some handy dandy new knee pads here to not destroy my knees.
I know it kind of looks silly but that's the reasoning for them. I am planning on leaving
the bottom here wood so I don't want to paint on the insides of the doors at all so I'm just
going to add some painter's tape around the edges so that I can avoid getting those painted on.
So we're gonna be using Dixie Bells In The Navy so it's a nice deep navy color and I'm excited
to put it on there and see what it looks like. Don't forget I gotta use my mister bottle. The
mister just kind of smooths out the paint this is a pretty thick paint chalk paint generally is
and so when you use water with it to water it down just a little bit it helps it glide along
the surface a lot easier and smooth it out. So I sprayed down with my mister bottle the surface of
the where I'm going to be painting. I sprayed a little bit in the paint and I sprayed my brush
just to have consistency over each surface and then that will also help my paint just smooth out
a lot easier. You might be asking yourself why I'm not using primer for this project and the reason
being is because I did a scuff sand and generally you use a primer if it's not going to adhere to
the surface itself or if you think you're going to have color popping through and I don't think
I'm going to have color from the wood popping through because this is such a dark deep color
it'll block it on its own. I'm trying to get this first coat on here I feel the wind picking up
I think it's supposed to rain today and it's coming quick so I've got to get this first coat
on before it hits. I'm not trying to miss any spots but trying to put a little pep in my step.
I'm doing something that I've never done before but I've seen other people do it and that is that
I'm actually painting the hinges the same color as the rest of the piece. We'll see how I like it.
Yeah like I said I've never done it before so I just have to see how it turns out. I always try to
get in these little spots I gotta kind of stipple my brush push all the paint in there but then I
don't want it to drip so I make sure to go back over it and get any drips that may be happening.
All right we beat the rain on the first coat step back and take a look. All right looks pretty good
and the reason I didn't put paint on the back of it is because I'm going to be putting wallpaper
back here. I haven't quite decided. I've got a poll up over on my Instagram if you don't follow
me over there. I frequently do polls lots of behind the scenes questions and just a lot of
different things so be sure to go follow me over there at Furniture Flipping Teacher so that you
could join in on the voting for things like this. So I'm going to let this first coat dry and then
we'll come back for coat number two. All righty it's time for the second coat. I still see some
of the coloring from the original piece popping through so I want to cover all that up and
hopefully two coats will be enough to do that. All righty coat number two is done. We're gonna
be good with two coats so we're gonna let this dry and then we're gonna get the top coat on it
to protect it and then after that comes the wallpaper. I am so pumped because although that
wind has been picking up a little bit the rain hasn't came yet so I'm hoping that it'll hold
off at least until I'm finished up with this hutch or else we're just gonna have to move right
inside the garage. All right as you can see the rain came. It's just sprinkling right now and it's
not too windy so we put up a canopy so that we can still use the daylight and I'm gonna get the
top coat on. So I'm using Dixie Bell's Clear Coat in flat because I don't want to have this to be
glossy or even semi-gloss. I want it to be a nice matte finish. I am using a foam brush to apply
the top coat. I just find that I have more control and it comes with a smoother finish.
Generally I go one way so that the finishing lines look good and all flow together. These
foam brushes are literally 50 cents so you can buy them in a bulk pack or you could buy one at
a time. They last you probably about two to three projects before they kind of start to deteriorate
so 50 cents for three projects I'd call that a good buy. All right the top coat is all finished
up. It's got to dry for a while and there were a couple of spots where when I put the top coat on
some of the blue paint came off so I'm going to go back and touch those up as well.
But for right now I am going to put some wood wax onto the wood to kind of bring it back to life
both inside of here and on the shelves that I'm keeping raw wood. So as I had shown you before
there was a little shelf rack that had fallen out and so I'm just going to be replacing it
or not replacing it but reinstalling it. So one of the nails is already in there and I grabbed
another small nail and I'm just going to hammer that in to make it match this other side. And
there's actually a really nice line here for me already so all I got to do is put it in there.
I am going to be using some Big Momma's Budda from Dixie Bell and it's the orange grove scent.
It smells really good and I'm going to be using a wax brush and I'm just going to be
rubbing it in on this raw wood and it'll just revitalize it bring it back to life
while also making it smell good. I've never used this on my channel before
but it really revitalizes the wood it's actually kind of like magic. It's kind of a cool result
once you see the finished product. All right so we've got all that Big Momma's Budda all in there
I'm going to do one quick layer on the top of this and then I think I'm going to put it in
there then put it on because that way I give a good base and make sure it's all stable. You can
just see the difference on how crazy it is it's just bringing that back to life. Doesn't that
just look so much better just a little bit of Big Momma's Budda and some elbow grease getting it
into the wood grain and it just makes it pop makes it shine that will dry and then it also smells
like oranges so let's get the wallpaper on. All right it is that time for the wallpaper and as I
said before I put a poll over on Instagram and it has been neck and neck the entire three hours that
this poll has been up so I'm going to show you guys the results. I'm looking right now and blue
this one has 121 votes and gold the one with gold this one has 128 votes. Guys it's literally been
almost tied the whole race we were kind of pulling for the gold I think this will really be good
because it's going to really pop with the hardware I'm going to be putting gold hardware on the
doors down here so just pulling it all together I'm excited to see how this looks on the back of
the hutch. Now my steps are to measure and cut and then I'll get to sticking it down. It looks like
I'm going to be able to do one row and then I'm going to have to cut the second row but hopefully
we'll be able to line up the design so that it looks seamless. I also got a couple of wallpaper
tools to help me with this because I knew I was going to be doing it and
I knew that this would be a good seven dollar investment. I've also never really done actual
true walls quote unquote walls with this I've just done drawers so it's kind of a different
feel because I feel like it has to be a little bit more perfect. Okay so I think I've got it all
lined up to where I need to cut here back at this seam and where it's lined up at the bottom
lined up on the sides I've made a little crease. All right so I am going to fold back this part
here and I'm going to stick it down I think I'm going to start from the top and then stick it down
and make sure it's lined up on the side as well and then go from there. Well the tape from where
they had rolled the wallpaper together is sticky and leaving that bad residue and it's becoming
dirty and that's kind of not making me very happy but you live and learn so I'm going to cut a new
piece I think I'll just use this one to cut the exact same size and then we'll go from there.
Okay and now I'm going to use my wallpaper smoother router and grab it smooth it out as I go
I don't want any bubbles so you want to get those out as we go lifting it up again if we need to
get as smooth as possible. All right no bubbles just got a little excess down here that we're
going to go ahead and cut right off this is just a tad bit tougher than I thought it'd be
but we're getting there I got the last piece cut and hopefully is going to fit in my spot where I
had it. I might have to be cutting a little bit off which will be fine I did a little extra
just in case but we're gonna lay it down and see what happens. All right now that we're done with
the wallpaper that got me a little frustrated I've never actually done it on a wall I've done it in
drawers before so that was a first time for me I'm definitely going to be watching some more videos on
how to install wallpaper but I think that it's gonna look good enough and I now that I have it
flipped over which by the way every time you paint or refinish a piece of furniture you always want
to make sure you get on the underside at least some point before you sell it because as you can
see it is just super dirty so we're gonna spray it and wipe all that down you can choose to do it
at the beginning like when you're cleaning the rest of it I decided to wait until I was doing
when I knew that it was going to be flipped on its back because this is a bigger piece
but we just want to get all those cobwebs and dust off of that bottom there and then not only does
flipping it over reveal dust and dirt on the bottom but it also kind of reveals some spots
that need to be touched up with paint so as you can see I just didn't get the underside of this
drawer and like I said before I was going to go through and get some of the spots that I had
missed previously so that's what I'm going to do next all right so I got all of the touch-ups done
and my last step before we're able to set it up is to put the hardware on so I'm going to drill
some new holes and then we're going to get those gold hardware pieces on I measured how tall the
doors are and I decided I wanted the hardware to be right in the middle so we put the level right
in the middle and we are going to drill two holes right where this level is and I think I'm going to
set it up and then I'm going to screw the hardware in and we're going to see how this baby looks
all right so the holes are in I'm going to put the hardware on I haven't showed you guys yet
but I'm choosing these gold tees for the hardware all right now it's the moment of truth
do we keep the shelves raw or do we paint them end to end it's done I personally like the wood
shelves so I'm going to leave it like that I think I'm going to go ahead and stage it up
and I'm probably going to stage it as a coffee bar slash pantry I think it would look really
cute in someone's kitchen to just store things or even just as a little decorative hutch
could store things down below I just think the raw wood down here brings those together up there
as well my opinion if it doesn't sell I can always paint the shelves again I posted this
on Facebook Marketplace yesterday I have it listed right now at $375 so we'll see if it goes
at that or if I'll have to lower it here in a couple of days let's do a quick recap on this
hutch and the expenses that I spent on it so originally it was $65 that I paid for it the
wallpaper costs about $9 but I only use about half of it so we'll say $5 and then all of the
materials together cost me about $15 so that is a grand total of $85 that I am in on this so not
too bad for a little bit more of a pricey piece and for bringing in some excess materials than
I may normally use I try to kind of limit myself on spending too much money on outside expenses and
materials but for this one I knew that I wanted to pull it together and those hardware pieces
were really just kind of outdated so it definitely needed a quick update the wallpaper did take a
little bit longer than anticipated so I got it posted a little bit later than I really wanted to
I was hoping to be able to sell it by now but let's talk a little bit more about how the hutch
went and how pleased I am with the results so the wallpaper in the back was probably my most
difficult thing with this piece I thought that it was going to be similar to laying in the drawers
or to just applying it to a flat surface but since these walls are right here in the way
and it's pretty tall and up and down it was a little bit difficult for me to be able to get
into the corners and to be able to flatten it out nicely to keep the sides even and so on and
especially because I had to cut half of it if I would have just had the part where it was a full
sheet and then another full sheet I think that would have been a lot easier because the part
that was the most difficult for me and that I will be researching on how to do a little bit better
is the cutting of the side up here and also the cutting of the tops and the bottoms to make it
fit into this space overall I really think that it turned out awesome the gold I'm really excited
that that was chosen instead of the blue I think the gold up here makes the hardware down below
pop so I just love this look overall it kind of has a whole bunch of different vibes going here
there's the raw wood and the gold for mid-century but the neutral the navy and just all of these
different looks coming together to make one look and I am excited for the person who is going to
find it and love it and want to buy it remember to go follow me over on Instagram to see when
this baby gets sold and also for a lot of behind the scenes if you like what you saw here today and
you want to join along on my journey of paying off my student loan debt and flipping furniture
be sure to get subscribed down below and I will see you on Thursday for another video
see on the flip side
