DIY KITCHEN TABLE MAKEOVER | How to Refinish a Table | Beginner Friendly

Furniture Flipping Teacher
13 followers
15 Video Views·Nov 5, 2022
Guys, we got ourselves another commission piece. Hey guys, welcome back to Furniture Flipping
Teacher. If you're new here, my name is Lauren and I am a full-time kindergarten teacher
and I just paid off my student loan debt by flipping furniture and now I'm on a journey
not only to help other teachers pay down some of their student loan debt but also to save up
enough money for a down payment on a house. Today I've got this dining set, this massive
dining set. It's got six chairs, a bench, and a fold-out leaf table. I am going to be sanding for
hours for this but I'm super excited. You guys have asked for a dining set so this came along
and I knew that I had to do it. Let's get started with some cleaning. So this dining set is actually
for a family friend of ours and so they've got several kids so when they found this table and
chairs on Facebook Marketplace they grabbed it and they said, can you please refinish it? So
our goal is to sand down the tops of the top of the table and the seats of all of the chairs
and the bench and we're going to restain those to kind of match the flooring in their new kitchen
and then the rest of the chairs and the legs of the table are going to be painted white. So we're
going to go for a little bit of a farmhouse look on these and with this being a commission piece
I know that it is very difficult to price yourself ahead of time before you get started.
Well I ended up pricing this at $450 so I think that might be a little bit on the lower side
but after I am all done I will add up all of my time and materials and I'll let you guys know
how much I truly made per hour when finishing this set. I'm going to be using super clean
to clean up the table and chairs and I'm just going to clean everything wipe everything down
before I get to sanding because I need to get all of this food and just oils and dirt and grime
off of the surfaces. So I've actually flipped one other dining set before we started our YouTube
channel and it's the set in my parents kitchen. That's what kind of got me started on furniture
flipping so coming back to a dining set is kind of fun. I know it was a lot of work back then and
so I think I've learned a little bit since then so hopefully it won't take me as long.
That time I literally sanded every single surface down to the bare wood which I know I will not need
to be doing that for this set. Like I was gonna wait to clean until after I sanded because it's
a little bit of an extra step because you have to clean again after sanding but that's what I would
have been rubbing into the wood and I'm glad that I decided to clean first. Okay time for sanding.
I've got my surf prep sander and yes you can use any old orbital sander or any sander that you
could get at a hardware store however it's going to take you just a lot longer than say a surf prep
would take you. This is their complete sanding system I ordered it on my own back in February and
I'm sorry guys we got a little bit of some mowing next door no problem but anyway and I didn't use
it until just a couple of weeks ago and I didn't think I had the right adapter but when I use it
I wish I would have started using it way way way long ago. If you are looking to invest in a sander
I recommend this one. I'm going to show you guys a little bit later once I get going sanding how
this one is going to go a lot faster than say my other orbital sander so I'm going to get started
here. I'm using an 80 grit because remember I am looking to sand away all of the varnish and
stain color into down to this solid raw wood color. Okay time on the bench I took 18 minutes
so that's not so bad this is all nice and smooth now and we're gonna continue on moving on to the
chairs next. All right so I just want to take a minute and do a little experiment with you guys
I'm gonna take my old Black & Decker orbital sander for the first little section of my table
and see how long it takes me to sand it down. I've got the same grit 80 grit sandpaper here
and then after I finish this side I'm gonna go ahead and take my surf prep sander same 80 grit
and we're gonna test to see how long it takes me with the orbital and how long it takes me with
the surf prep. I just want to show you guys and really do this test for myself to see and to show
you that this little investment is truly gonna be worth it for you guys so I'm gonna start with
the Black & Decker we're gonna set my timer to start and then we're gonna see which one is more
efficient. Start timer now. I'm gonna do five minutes so we just hit five minutes of sanding
with the orbital sander and now I'm gonna take my surf prep and sand for five minutes on this side
and see if I can get farther than just about a quarter of the table here so let's check out the
surf prep. Okay so over there I got right about to this first notch so we're gonna see if I could get
a little farther with my surf prep in that five minute time. Here we go. Start it up. All right
as you can tell I got double the distance in that same five minutes so in essence this is going to
save you and cut half of the time versus using the orbital sander so is the surf prep a good
investment? I would say yes if you are wanting to get into furniture flipping can you just stick
with that orbital sander? Yes. If you are wanting to get into furniture flipping and you're planning
on sanding things down to the bare wood is surf prep going to save you time? Yes. So in essence
it's time saves money so that investment into your own business is really worth it. I'm gonna keep
sanding. Alrighty we are all done sanding three hours later just eliminating the finish on the
tops of the table and the seats. Took me two hours with my surf prep and then I did another hour
of scuff sanding the rest of the wood. I didn't need to go all the way down to the bare wood
because that's just gonna get painted but it's good to at least do a scuff sand so that your
paint and primer can adhere better to the surface. Prep prep prep is gonna make your finished product
look great and hold up better too. Alright so now that sanding's finished I am going to be priming
the parts where I'm gonna paint. I don't want to get any paint on the parts where I sanded down to
the bare wood. I'm going to be staining that so I'm going to be covering all of that with this
masking paper and some frog tape. I've never done this before. Thank you. That's it. Everything
that's gonna be stained is covered with paper and tape. Took a little bit long and I thought
it was very tedious but got it finished so let's prime. Alright so I'm gonna be priming with the
Benz shellac base primer because this is solid wood and it has that stain on it so I don't want
anything popping through so we're gonna go ahead and prime and then also the primer will then give
me a base layer for my white paint. I'm gonna use a roller so I've already prepped my rolling pan
with some foil so that I can just have easy cleanup and pour it on in and I've also got my
brush right there just in case I need to get into those little crevices so let's get started.
Rollers are a little bit splattery too so probably a good idea that I covered the entire
seat and not just the edges because the roller will splatter paint everywhere. Okay so I finished
priming the other night and it got a little bit dark but had to get it done so we're back out
here the primer is dry and we're ready to get some paint on. I am going to lightly do some sanding
with my sanding sponge and we are going to be applying some Rust-Oleum linen white for the
chairs. This is exactly what I used on our kitchen chairs and it's held up really awesome. I've got
four brush choices over here, a couple of zebra brushes and then a Jolie brush. I'm just not sure
what I want to use on these yet but I know that I'll need these smaller ones to get into all of
the crevices and then I'm going to be using my mister bottle as well to smooth out the paint.
I'm hoping for two coats but probably going to need three. Let's get started. The sanding sponge
is just going to smooth out the primer here and just make sure that we don't have any of these
bumps. Also I put the chair on these painter's pyramids because that way it'll allow me to get
down all the way to the edge without getting it stuck on anything and it just allows me to
make sure I got full coverage. I'll link these down in the description. They can actually hold
a lot of weight. Sometimes you get a little scared but it does hold a lot of weight if you use them
right. Okay first coat is done. Time. It has literally been two hours. Oh my gosh this set
is taking a while but it's okay. I'm really confident that it's only going to need one
more coat of white and this second coat of white should not take as long as this first coat did.
There's just a lot to be covered on that first coat and it's the same amount of coverage on
the second coat but we'll go by faster I'm hoping. All right but anyway this has got to dry
and you really want to make sure that you check for drips anywhere especially with all the slats
things like that because drips are not your friend and when you're doing smaller spaces with
sides on really close together you just really got to make sure that you're using smaller amounts
of paint. So we're gonna let this dry for a bit. Actually the chairs are dry honestly so
probably gonna just go right over there and get started. Okay so before I get to coat number two
I'm gonna take my little sanding block. I got a hundred grit sandpaper. I'm just gonna smooth out
all of the paint here. I recommend that you do this before. I actually probably have a little
bit too rough here. A hundred is pretty rough. I recommend that you do this before your second coat.
This helps smooth out all brush strokes and things like that. This time instead of doing one chair at
a time I'm gonna go ahead and do all six chairs and the bench and the table and then get to second
coat. We finished up on coat number two last night and so that's had some time to dry so my next step
is to do coat number three. It's just gonna be a touch-up coat I just need to make sure that there
are no dark spots shining through and I've got about this much of my can of Rust-Oleum left. I
started with a new can so I'm hoping that I'm not gonna have to open another one. We're gonna go
ahead and get started. I'm gonna do another light sanding to get rid of some brush stroke lines and
marks and then I'll get to touching up. Also I did confirm with the customer and she does want it
distressed so that actually helps me out a little bit because that means that I won't have to worry
about necessarily the corners being all covered and things like that because I'm just gonna go
back and take my sander and sand that away anyway. All right I am finished with coat number three.
Although I thought coats two and three would go faster than the first coat I was wrong. The first
coat went by pretty fast I mean two hours but then the second and third coat both took me about
a two and a half hours each so that's five hours right there. I know I totally underpriced myself
on this. Niamh's shaking his head at me right now behind the camera but ah you live and you learn
and this just makes me even more excited for the summer because I am gonna get a sprayer and I feel
like this would go by so much faster with a sprayer. Anyway my next step is to distress just lightly
though because the customer was like on the fence kind of and I kind of suggested to be distressed
just because it's a kitchen table lots of kids I know that it's gonna get dinged up and things
like that so I think already doing it in the natural spots just lightly will be perfect that
way if anything does happen later on that is fine and it'll just kind of blend in so let's distress.
All right so for distressing I'm gonna do it nice and light so I'm gonna be using a sponge and a
320 grit sandpaper and this is just gonna allow me to have a little bit more control than my bigger
handheld sander. I'm just gonna go onto the spots where it'll probably get nicked up and damaged
I guess you could say damaged naturally and so that's just gonna be basically on the corners
and on the edges here of the top but then mostly on the legs so I'll just show you. It's cool
because the dark wood from before the color that it was before is actually popping through so
that's really cool because just gives it that extra dimension and that little pop. When you're
distressing you just kind of go with the flow and let your sander take it away. I tend to distress
before the top coat because I need to or just in case I end up having to go back like if I
distress too much or something like that then that'll be nice and easy for me to go back and
touch up some paint where I may have gone a little overboard things like that. All right
one distress let's keep going. I've been working for about three hours after school here today
I'm gonna call it a night pack everything in and then we'll continue tomorrow. Our next step is
to go ahead and get the top coat going on the paint because we need to get stain on so that
we can top coat this stain as well. So top coat coming at you next. Okay I am ready for the top
coat. The top coat I'm going to be using is the Rust-Oleum matte clear flat no shine anything
like that and it's going to be over the whole white part of the chairs. I'm probably going to
do two coats on the top but the rest of it should be fine especially since it's all distressed and
things like that one coat will be enough to seal it and I know this because like I said I've used
this exact paint this exact top coat in our kitchen at my house and we've had it for almost an entire
year and no issues there. So let's get started. I'm going to use a foam brush two of them one
smaller one for the slats and then one a little bit thicker one for the bigger sides and you
just really really really want to make sure that none of this gets into clumps or pools anywhere
because that's when you get the drying that just it just doesn't look good because there's chunks
and clumps and blah. So really be careful of getting too much top coat on but you just start
and the little bit goes a long way. The top coat is all finished up. That took me another two and
a half hours on the top coat. I am just ready to move on to the stain. So we are going to be staining
the seats of the chairs and the bench and then the top of this table here and our goal is to get it
to kind of not necessarily match this flooring piece that they're getting in their kitchen
but kind of just complement it a little bit. I've got two different stains that I picked up that I
thought would probably work. So one of them is Provincial by Minwax and one of them is Special
Walnut by Minwax. In between all of those coats did a little testing on this piece of wood that
I had. I'm just trying to figure out which one I think would match the best. I have got the Provincial
here it's a bigger spot and then I've got the Special Walnut here and then I've got both here
and to be honest I feel like I'm just not sure really. I feel like the Special Walnut is too light
and then the Provincial just might be a little bit too dark but maybe not and then the both
is just going to be adding a lot of stain and layers to this. So I'm thinking that I'm going
to go with the Provincial here because it just matches the best throughout all of these colors.
This is the one that I originally thought I was going to go with until I saw that Special Walnut
so I picked up both but we're going to just go for it and do the Provincial. So I've got to take
all of the papers off of these that I use to protect from the paint and then we'll get to
staining. There we go got a few helicopters in there it's all good though. I got all the tape
off and the paper and now I'm just going around touching up any areas where I may have gotten
some paint on the wood or it bled through the tape things like that mostly around this back
edge because it was really difficult to get any tape back in there. Before I apply the stain to
the surface I decided that I want the best look possible so I'm going to be using a pre-stain
from Minwax. It's just a wood conditioner and it's going to lessen the blotchiness of this stain
so that basically all of the wood takes the stain the same. So I'm going to pop this open
and then I'm going to apply it with a brush and then it says it has to stay on there for 5 to 15
minutes before applying the stain. So I'll get all this on here go out to the chairs and bench
then I'll come back here and I'll stain it'll be ready. All right it's that time we get to put some
stain on. Just pop this baby open so when you're applying stain you want to do kind of a little bit
of over amount that way when you're wiping it back it will get to seep into the wood grain.
I just don't want to get too much on the edges there that way it doesn't drip off the edges
onto the paint. I'm using my lint free rag here to wipe it back that way no lint gets stuck in the
That took the stain really well. I've never stained a tabletop before so this is a first for me
but I think it's turning out pretty good. I actually like you know the different wood pieces
have different grains and different colorings some of them are a little bit darker but it's not
blotchy it's just that's just kind of the look of the table. You could even see it in the raw wood
how some of them are darker and so it's going to take the stain a little bit differently even when
I use the conditioner. I think that is a pretty close match like again we don't want to match it
exactly anyway and so those colors are going to really complement each other. That's going to dry
now it's got to dry for actually like four hours before I put any top coat on so in the meantime
I'm going to continue on with the stain on the seats of everything else and it's kind of creepy
creepy I don't know if creepy is the word but kind of drying funny and a little scaring me a little
bit it's like dotty so I'm hoping it's just actually drying and then it won't be like that
when it's dry dry. I was a little bit worried about the stain kind of drying funky but we let
it dry for two days and it really only needed about four hours before putting the top coat on
but I think letting it dry those extra few days really helped it soak into the wood and dry to
the max. So now I'm ready to put on some poly and you use poly when you are going to top coat
stain. Polyurethane is different than say polycrylic. Polyurethane is going to be better
for oil-based stain coverage versus polycrylic which is more like more than likely a water-based
top coat which you could use for paint. So before I do the polyurethane on the top I need to make
sure that all of my dust is away because this is going to be sealing everything and we don't want
any dust underneath the top coat to later pop out and I'll do the same thing on the chairs when I'm
going out there. Right now we're going to focus on the table so with your wipe on poly I'll link
it down below. You're going to want to shake it up just in case any settles down in the bottom
then you're going to get a lint-free cloth and you're literally going to wipe it on. This is
the second time I use this actually one of our supporters sent it to us so thank you because
this is so so much easier than a can of poly. It says apply a liberal amount, liberal means a lot,
to your cloth and then just wipe it on. I am going to be doing two maybe even three coats on this top
of the table because this is going to be a very high traffic area so I want the utmost protection
here and I think that one would just be too little and two might not just be enough. I want to just
make sure especially since this is a custom piece and it's going to be their dinner table so I will
still recommend to them that they have placemats or a tablecloth and things like that just because
that's how you're going to get the most duration and quality out of your table. Make sure I get
all along the edges here as well, so much easier than brushing it on. So I'm going to have to let
this dry for a few hours before I put the next coat of poly on so I will probably do that off
camera since it is going to be dark and late. Poly's on, I'm gonna let that dry for a couple
hours here before we get coat number two on and then we'll come back to do a little bit of touch
ups. I ended up doing three top coats so I did the one you guys saw, I did another one before I went
to bed, and then I actually came out here before school this morning and I did that third top coat
so overall the top coat took me one hour so that's an hour added on to the total time and
we'll go over the total time at the very end. Right now I'm going to take this finishing pad
and just give a nice little wipe over over all of the surface and what this does is this just
smooths out anything. I got this finishing pad on Dixie Bell's website so this just kind of
eliminates any scratchiness, makes it all nice and smooth but it's not as tough as sandpaper so
it's not going to take any of the finish off or give it any of that dust. We are nearing the end
of the process, the last and final step that I am going to do is to do any last minute touch-ups.
So there was a couple of spots where I had gotten some stain on the white and I just want to cover
that up. I've just got a little bitty brush that can kind of get into those fine details. We're
done you guys, this dining set is finished. This is my second dining set like I told you before,
however it's my first dining set in which I did the stain on the seats and the top of the table.
I really think that it turned out amazing and I think that it'll look awesome in their brand
new kitchen. I was so thankful that they chose me to do this set for them, that was a really fun
thing to be a part of and for commission pieces I talk a lot about pricing. I am still new to the
game you guys, I know that I may seem very experienced and things like that but truly
I'm not even a year in so I am still learning every single project. That means that I still
struggle with pricing my commission pieces. I priced this at $450 and I thought that that was
going to be an awesome price and really it's not that bad. After spending 16 hours with all of the
work that needed to be done I ended up with a total profit of $400 because I got the $50 worth
of materials that I used. So between the $400 and the 16 hours that broke it down to about $25 an
hour and that is a really good hourly rate if you ask me. However I usually try to shoot for that
$30 to $40 range when I am pricing out commission work. I did not think that this set was going to
take me 16 hours, I'm not really sure why because like I said I've done a dining set before.
However I thought that the spindles, the slats instead of spindles wasn't going to take as long
but it took three coats of paint on top of the primer and then I had to top coat and then I had
to sand and then I had to do this and that and this and that and overall I just didn't think that
it was going to take me as long as it did. Anyway I am so pleased with the way that this turned out.
I've been getting lots of requests to do a dining set on my channel so I really hope you guys
enjoyed. Let me know down in the comments if you have a dining set that you have done before
or maybe that you're going to do in the near future. I'd love to hear your guys' experiences,
do you guys like the spindles or would you prefer slats or would you prefer nothing in the back of
the chairs because I know that's what I would prefer. Anyway I hope you guys enjoyed. Be sure
to get subscribed down below to follow along on our journey of helping teachers, helping each other,
and becoming a great FFT community as well as following along on our journey to earn money
to put toward a down payment on a house. I hope you guys enjoyed and I'll see you on the flip side.
