Strong & adjustable workbench hold down clamps | EASY DIY PROJECT
Clamping wood on your workbench is super easy with the workbench hold down clamps I build in this video. These bench dog clamps are strong, adjustable and super easy to build at low costs. Thanks to the right-angled metal bar, these clamps hooks into the bench dog holes on my workbench. Now, all materials can be clamped on my workbench, even if they are in the middle of the table-top.
Blog post with MORE INFO: https://www.christofix.com/strong-adjustable-workbench-hold-down-clamps/
==============================================================================
VISIT MY WEBSITE
📖200+ woodworking-related articles & FREE PLANS: https://www.christofix.com/
BECOME A CHRISTOFIX MEMBER
💳 Get access to special membership benefits: https://www.youtube.com/c/ChristofixDIYProjects/join
Check out my current members + links here: https://www.christofix.com/become-a-member/
BUY FROM CHRISTOFIX
🏺 My Etsy shop: https://christofix.etsy.com
SUPPORT ME
💰 Donate on PayPal: https://www.paypal.me/Christofix
Your donation will be used to continue creating informative videos and blog posts. Thank you for your support!
==============================================================================
____*TIMESTAMPS*____
00:00 What I will make in this video
00:10 Building the base of the workbench hold down clamps
01:13 Making the bar
01:38 Making the handle
02:18 The movable jaw
02:41 Assembling
03:24 Demonstration
____*MUSIC IN THIS VIDEO*____
🎼 Music from Epidemic Sound 🎼.
Get the best music for your videos here: https://www.epidemicsound.com/referral/0eg20l/
____*PERSONAL PROTECTION EQUIPMENT*____
⛑ Ear protection — https://amzn.to/2E78K1T
⛑ Dust mask for woodworkers — https://amzn.to/3y5Zg0t
⛑ Work gloves — https://amzn.to/2YC4MYu
⛑ Safety glasses — https://amzn.to/2E40Ea7
⛑ Safety Boots — https://amzn.to/36qkCZ4
⛑ Blaklader work pant — https://amzn.to/2t58T3C
⛑ Blaklader Foam knee pads gray — https://amzn.to/36nQDAU
____*MATERIALS USED IN THIS VIDEO*____
⚙ Birch plywood 18 mm
⚙ Metal rod 10 mm
⚙ Bolt M8 60 mm — https://amzn.to/2OmPbsp
⚙ T- nut M8 — https://amzn.to/2OHLvjU
⚙ Washer M8/20/0.2 — https://amzn.to/34mikJQ
⚙ Hexagon wood bolt M6 30 mm — https://amzn.to/2DEJQq1
⚙ Epoxy glue — https://amzn.to/2OijfFf
⚙ Sanding paper 120 grit roll — https://amzn.to/35MKRZ3
⚙ Blue painter's tape — https://amzn.to/31s19rF
____*TOOLS USED IN THIS VIDEO*____
🔧 Pica marking pencil — https://amzn.to/32q9vyk
🔧 Hilti Cordless drill SF144-A — https://amzn.to/2qIfmR2
🔧 Drill press — https://amzn.to/2KVGdjI
🔧 Kreg KMA2900 Multi mark and measuring tool — https://amzn.to/2P1n0yc
____*MY JIGS I USED IN THIS VIDEO*____
🔨 Drill press drum sander — https://youtu.be/q-KEHGgpSmg
🔨 Drill press table and fence — https://youtu.be/UCPLdnGHZEc
____*RECOMMENDATIONS*____
📖 Want to see how I learned to shoot my videos? http://bit.ly/shootvideoswithanycamera
📖 How I saved hundreds and was able to invest in more tools with the same budget: http://bit.ly/mysmallshop
📖 Read my full story about how I started here: https://www.christofix.com/about-me/
____*CONTACT*____
🔗 E-mail - [email protected]
Feel free to email me about sponsorship, advertising, or endorsements.
THANK YOU FOR WATCHING!
#Christofix #Woodworking #clamp
Disclaimer: Links included in this description might be affiliate links. By using them, I earn a small fee for your purchase, but it doesn’t cost you any extra. Like that, you support me to keep creating free content. Thank you in advance!