Step-by-Step Toilet Tank Rebuild with Korky Universal Kit

Builders and Beyond
48 followers
7 Video ViewsยทNov 3, 2022
Step-by-Step Toilet Tank Rebuild with Korky Universal Kit
So my friend called me up yesterday told me that her toilet wasn't working properly.
Supposedly the water is draining past the flap and it's not filling properly and not flushing properly
and so the water in this area is pretty bad so I told her we could kind of tinker around with
things and try to adjust things or we could just rebuild it. She's okay with rebuilding it she just
doesn't want to replace the toilet and so I told her we could just replace the components in the
tank and that's what I'm going to be showing you today. Okay here's the toilet and I already took
the lid off from the tank and this might look a little bit different than some of the toilets
you've seen maybe the one at your house a lot of times you don't have the stuff here in the back
it's just kind of exposed in the back to bring it to the bolts and if you listen real carefully
and the components in the tank are what controls your toilet the toilet flow and so that's why
because the toilet isn't leaking there's nothing else wrong with the rest of the toilet
I can use that universal replacement kit and just replace the components in the tank and basically
have a whole new toilet. Here's the replacement kit you can get these at Lowe's or Home Depot for
about 20 some odd dollars 22-24 dollars and it gives you this handy little list of things that
can go wrong with your toilet so if you're experiencing any of these problems you can just
replace these components in the tank and it'll fix everything. So how the water flows in your
toilet is the supply line comes up and hooks on to this fitting the water will come up here and
based on this float whatever height the float is at your tank will fill up to that portion
and this little chain here hooks to the handle outside and it'll lift this flap up that lets
the water go down into the bowl and flush everything out of the bowl. So I don't know how
well you can see this but the first thing I'm going to do is turn off the water to the toilet
you can hear how that shut off so when you shut off the supply line there's still going to be a
little bit of water in the bottom so then what you'll do just open up the flap let any water
drain out that's going to drain out and then what I do is I throw a bunch of paper towels in there
soak up the water really well so I don't have a water mess it's usually easier for me just
to do that rather than trying to figure out ways to drain the water.
Okay next what I'm going to do is at the bottom of this little tower here
is where the supply line comes in. Okay I'm going to disconnect the supply line in the back
there'll be a little bit of water that drops on the floor from the supply line.
Next you can see those bolts and there's nuts and washers on the other side of the bolt
and so I'm going to loosen up the nut and the washer up in the bottom and push the bolt through
and I'll be able to lift off this tank. And then to take out those two screws I'm just going to
use some channel locks and they're just flat head screws so I can just kind of unscrew these with
the screwdriver. If they don't come out sometimes you gotta get a little bit more aggressive with
them and try to figure out something else. I prepared a little spot to set the tank on the
floor because this tank is made of porcelain and it could possibly scratch something.
Okay I'm going to get to work replacing the guts on this thing. Get some channel locks,
loosen this up and remember all of this stuff is plastic so when you go to put it all back
together don't start wrenching on stuff. A lot of this stuff's just kind of just a hair more
than finger tight. Okay so you see the old piece and all we're going to do is replace it with a
new piece. Okay it won't hurt just inside here. This is pretty clean but maybe your water isn't
as clean as this so just kind of wipe around the inside of this hole here. Make sure there's no
debris so you'll get a nice seal with the gasket. When you put this in this hose is going to go over
to this other side. There it is. And the reason is is this part is actually what fills the bowl.
So as your tank is filling, get this good spot, as the water is coming in from the supply line
there's going to be water that drops out into the tank which will be used to flush everything down
but then this little tube goes into this other tube and drains water directly into the bowl. So
it's this tube that actually fills up your bowl and later on I'll show you how to adjust this
if you want more or less water in the bowl and more or less water in the tank.
So the gasket's already in place so I'm going to set this just kind of horizontally in the tank
through the hole here and I'm just going to tighten this down with this nut.
And this one's a little bit different. It's kind of got a hex to it. This one actually has a couple
tabs so you can crank down on this and get it you know pretty hand tight. So even though this
says universal this is only a two inch drain and the toilet that I'm replacing the parts in is a
three inch drain. So I had to run up to Home Depot real fast but I have the parts and it basically
works exactly the same way that I'm going to show you with the two inch drain and the three inch
drain. Okay so I have the drain out of the tank. I'm going to go ahead and clean up both sides
make sure it creates a good seal. Here's the new drain and flapper. It's for a three inch drain so
go ahead and install this and if you think about the tank and you'll see a little bit later but
this is actually going to sit in there at kind of an angle so it stays away from that fill valve.
And once again a lot of these parts are plastic so get things tight but don't really crank down
and certainly don't use channel locks or anything. You can just kind of hand tighten it as tight as
you can. If you're not sure you did get it tight enough I mean you can use channel locks if you
want but be very very careful how tight you get some of these connections. In this set with the
three inch replacement kit they gave me some new bolts so I'm going to go ahead and put those on
and once again just clean everything off inside really well.
Okay get these bolts pretty tight but not too too tight. This little gasket just goes here on the bottom
and then all I'm going to do is pick this up and set it right back into place. So that black gasket
will sit here the bolts will go through the holes and that supply fill line will go through this
little hole in the back. Now you see how this tank rocks a little bit so that that gasket at the
bowl a little bit off from the porcelain on the base. So you want to kind of get that centered
so the porcelain isn't touching. It'll tighten down a little bit and maybe it will touch a little
bit but you don't want it like off to one side and in this toilet it's not gonna make a big difference
but some of the other toilets out there I've showed up to do work and the tanks are actually
off because they've tightened one bolt way too much and the other bolt not enough to make it
even. So you just want to make sure that you kind of keep the bowl or the tank even as you
tighten these bolts down. And kind of a something I suggest is I'll put a little bit of pressure on
this tank and kind of squish that gasket down and then I'll tighten the nuts up and then that'll
help me secure everything. And a little tip at this point as well remember how I just put the
bolts in and then I tighten them up with the nuts on the bottom before I set the tank down?
You absolutely don't want to mess with these after you've done that step. So the nuts that
I put on the very bottom just to tighten the tank down I'm just going to tighten those up
and these should stay in place but certainly don't mess with these after you get these tightened down
on the tank. I'm going to re-hook up the supply line. Okay so here's our handle and this one's
obviously adjustable. So what we're going to do is we're going to get it into place to where it's
right over that flapper, tighten it down and you might have to make different adjustments.
You know if this handle hits the lid of the tank or you know anything you might have to
get a little bit creative and move these things around. Okay whenever you hook up the chain you
just want to make sure that this flapper is is solid. So there's little links here that can be
adjusted. You just take this I'm not going to try to take it out because it's looped around but you
can put this little end clip on different links and get it to be at the right height. You certainly
don't want this pulling it up pulling up at all because it'll allow water to seep through and
you'll have a running toilet. So I have this with a little bit of slack in the chain so I know it's
going to seat properly and when I lift it up it looks like it's going to move enough to where it's
not going to hit the lid of the tank. This little hose just goes into this port. I have my hose
connected this is what's going to fill the bowl and then this little float that's inside of this
is what's going to fill the tank. So all this stuff is adjustable and so since there's the
float in here you can just kind of move this back and forth get this set to where you want
the water level. You can see where the old water level is with that line here so we'll put it back
to about where they had it before. Turn the supply line back on and we're going to start filling.
Now there is this little adjustment valve here we can adjust back and forth
and you'll need to let it fill up once there's still water in the bowl.
So we'll let this fill up make sure that this floats at least in the right spot
then we'll flush it and we can make the adjustment on this tube
to determine how high we want the water in the bowl.
And while this is filling up this is a good time to check all your connections
make sure your supply line isn't leaking make sure there's no water leaking anywhere around
these bolts or anything anywhere where you might have a loose connection or something
didn't seat properly. So the tank's full no more running water flush the toilet that's it.
So it wouldn't be a construction handyman job if something didn't go wrong so usually I carry
around the universal toilet kit so I can just swap stuff out I don't have to run to the store
and whenever I show up to do a toilet repair or something like that I have all the parts that I
of course in this case I didn't have the right universal kit I guess I need the three inch
universal kit and I don't deal with that very often and so if you're going to do this project
by yourself make sure you know what size of drain goes in the back I'm guessing it's probably going
to be the two inch especially with the conservation efforts I have going on with power and water and
everything they don't want you using you know big drains and things. So I also just wanted to
remind you the whole reason the toilet didn't need to be completely replaced is the wax ring on
the bottom wasn't bad the toilet was sat properly it wasn't leaking or anything all it was was the
running in the back and so if you don't want to replace a whole toilet go through that whole mess
carrying the toilet you know an old toilet out a new toilet in and dealing with all that then
you can certainly just rebuild these and it isn't a big you know a big deal at all. So in general
these jobs are pretty simple repairs around the house and they'll save you a ton of money because
a plumber would charge a bunch of money of course you know we're friends so I'm not charging anything
I'm just gonna I guess the deal was you know you can put this video on YouTube and and then you
know do the work on the toilet so it benefits both of us and I hope it benefits all of you out there
too that you kind of see how the toilet works and how you can rebuild these yourselves and save
yourself a bunch of money. So we appreciate you watching our channel and we thank you so much for
everybody that's subscribed and we hope to see you next time. Thanks!
