Electrical Wiring Basics

Builders and Beyond
48 followers
52 Video Views·Nov 3, 2022
So it's a super cold night here in western Pennsylvania. I kind of taken a break from
the framing for a couple days because my friends needed to use my garage to work on their jeep.
So I didn't get any lumber but I'm going to be doing the electrical work here pretty soon
after I get these beams built in the next video. And so I thought I'd take this opportunity just
to kind of explain how the wiring is going to go, the wiring process, how three-way switches work,
how to wire up outlets, which wire to use, which breakers to use, and just kind of give an overview
of what I'm going to be doing, which will also help those of you who want to do wiring at home.
It's basically exactly the same principle they would use to wire light in a bedroom or, you know,
down in basement projects or, you know, wherever you need to do wiring. So hopefully this helps
you out. And as with all my videos, this is kind of a, you know, do this at your own risk.
This kind of work is dangerous. I've mentioned it with the nail guns and with the table saw,
things like that. One accident can certainly change your life but it's nothing that is to
be afraid of as long as you just kind of respect the tools and certainly respect electricity.
I know that this stuff really isn't that difficult to learn. A lot of people are just nervous
because, you know, electricity is electricity and they always hear about people getting shocked and
whatnot. But, of course, do this at your own risk. But this is really simple things that
pretty much anybody can figure out. I'm sure you're familiar with electricity in that
if you have a circuit, it has to be complete. And current is nothing more than a flow of electrons
around the circuit. And all these electrons do, they go around the circuit. But in order for
them to flow, you have to have a closed loop. And that's one of the basic principles of electricity.
And what I use when I wire is this Romex. A lot of electricians, they'll use
individual strands. But I like the Romex because it comes with three wires inside. So,
I don't know if you can see that. But inside here, there's three wires in this jacket.
And what's nice about it is it's basically one wire that can complete your loop. And what I
mean by that is, let's take our panel box, or in my case out here, it's going to be a sub panel.
And I'm going to take power from the box to something like, say, a switch. Then maybe I'll
come over to a light. And then I'll continue back. And in order for this circuit to be complete,
the power has to leave the panel box and get back to the panel box. So, with this Romex,
it's really nice because let's take just, let's get rid of this copper wire, grab it. It's
freezing cold, so I have my gloves on. So, now let's look at this from the perspective of the
Romex. So, we have our panel box. A little dyslexic today. The power leaves. The power,
when I say power, it's, you know, there might say a line's hot or where the electricity is
coming from. So, the power is coming from the panel box through the black wire. And say,
this is where our switch will be. Say, we'll have another black wire that'll come over
and hit our light. And then this is what completes our circuit, is now it'll travel down this white
wire and go back to one of the bus bars in the panel box. So, the copper wire is your ground
wire and it acts similar to the neutral wire. It provides another avenue for the electricity
to get back to the panel box and complete this circuit. And now that's, it's a safety thing.
Instead of you becoming the short circuit and going from the hot to yourself and hurting yourself,
it'll actually provide another avenue to get the electricity back. And since
this copper wire is more conductive than you are, it'll make it back to the panel box and
down to the ground safely. Okay. So, I drew out some circuits here that are going to represent
the circuits that I'm going to use, the smaller circuits I'm going to use in this building.
There's a few more and a few people have reached out to me, asking me some questions on YouTube
and I'll create another video that gets a little bit more involved. But the one thing that I want
to preface is, I'm not one of these guys that take shortcuts with the wire. There's different
ways to wire these circuits to save some wire. And for me, I just like it to work 110% of the time.
And so, I absolutely won't, you know, use the, if you look up some of these circuits online,
people actually take the neutral wire and they'll make it a hot to get it to run back and run a
switch or something like that. I don't do stuff like that. I'd rather spend the extra couple
dollars and just make sure it's going to, it's going to work regardless. But I've come into
rewire houses before and do different things. And you have to sit here and play these little
games and figure out where, you know, where the wires went in these circuits, because they decided
to use the neutral as a hot wire to go back to lights and different things like that. So just
for ease of the next person, I certainly don't like to make things more complicated than they
have to be. So let's start out with the little panel box that I made here. And these breakers,
put out a couple breakers here, and they're all a little bit different.
And you can tell they're always marked what the amperage is. The voltage in these circuits is
always 120 volts, but the amperage is different. And that's what you want to pay attention to.
The white Romex is 14 gauge, 15 amp wire. And the yellow Romex is a 12 gauge, 20 amp wire.
And so whenever you're running these circuits, you want to make sure that you,
that you pair up the proper breaker size with the proper wire. You can always say, put the,
you know, a larger wire on a smaller breaker, and that's not a big deal,
but you never want to go the other way and say, put that 14 gauge, 15 amp wire on a 20 amp breaker.
Then you can potentially cause a fire. One thing that you do want to pay attention to with the
breakers, a lot of them are, well, they're all kind of specific to certain boxes. And so you
want to make sure that you use the correct breaker or the compatible breaker for the type of box you
have. So if you have a general electric box, you may not be able to use a Murray breaker in there.
And you can see some of the connections that they'll make inside the box are a little bit
different. They won't always hook up the same way. And so you definitely, when you go to,
you know, if you want to run an extra circuit for whatever you're doing in a garage or basement or
whatever, you want to make sure that you select a select a compatible breaker to hook up the
circuit in your panel box. Okay. So here's my little panel box drawn out. I'm going to use
a 20 amp breaker. And you'll see that just like in my last video, I have my little bus bars here
on the side. So for, for my sub panel, I had to separate the neutrals and the hot. So I have the
white wire, the neutral going to one bus and the ground going to the other bus and my breaker in
the middle 20 amp breaker with my 12, two wire and 20 amp or 12 gauge wire and my 20 amp wire.
So you'll notice I wrote 12, two here, and you'll notice I have 14, two down by this
white wire. And it's a little difficult to understand at first, you'll notice that there's
three wires in this yellow Romex. So why would we call it a 12, two? Well, I don't know that people
that manufacture this or whatever they, you know, electricians or whoever came up with this,
I guess they're only considering the two wires that are used to like the two main wires to
transport the, or to conduct the electricity. And so you don't count the neutral wire or you
don't count the ground wire. And so this is a 12, two wire because it's 12 gauge wire
and there's two wires inside. If we come over to this little wire, you notice it's white. So it's
14 gauge, 15 amp wire, but you notice that it has another red wire. It has a red wire. So there's
a white, red and a black wire. So this is going to be called 14, three wire, three wires, not
counting the ground. And that's very important when we get to this circuit, which is going to
be a three-way switch. Okay. Let's start with the typical outlet. Wearing a typical outlet in your
home. So this is a rated for 20 amp circuit. So like I said before, we have our panel box or sub
panel hooked up. So let's discuss what's actually going on to hook this up. We hooked up the black
to the breaker, and then we hooked up our other two wires to the buses. Then our yellow wire comes
along and I use blue. And so the white wire, just because I obviously there's no way to draw
white on white. So I have the white wire that I hook up to the silver screws. I have the copper
wire, which is hooked up to the ground screw. And I have the hot, which is connected to the
copper screws. So this is very standard. If somebody hooked this up backwards, it's not a
huge deal. AC power is pretty forgiving. There's a whole theory behind it. So if you connect them
backwards, just connect them back the right way. I don't really want to get into the theory on how
all this stuff works in this video. So whenever you turn the breaker on, it's going to make the
circuit hot, which means this black wire is going to have power to it. It's going to have power
clear up to this screw and then to the terminals here. And as soon as you plug something in here,
you're going to complete the circuit. So if you plug in a lamp and turn the lamp on,
your power is going to flow through the black wire. And it's going to go through the lamp,
come back to the neutral, and then head back out all the way back to your panel.
Okay, that was for a single outlet. For two outlets, it's not a big deal. Same process.
Come over to your first outlet. You're going to hook up your neutral to the silver screw,
and you're going to hook up the black wire to a copper screw. And then with your other screws,
kind of follow me on this, your other neutral is going to come up and hook up to the silver screw.
Your other black wire is going to hook up to the top. I would recommend trying to stay consistent.
Make sure that if you hook this black wire up to the top, hook up that other neutral
to the top of the silver screw. And then this wire would go to the bottom. This other screw
would go to the bottom. Just trying to stay consistent when you do electricity and try
to keep things neat so it's easy to follow. Here you're going to have to actually wire nut
these copper wires together. Because as you'll see when I go to actually wire the building,
you'll notice that there'll be a wire off from this copper wire coming off. This will be wire
nutted, and then this ground will come in. Then this ground from this other wire will come in.
It's not good practice to put two wires on one screw. And so what you do is you kind of make a
pigtail here and connect them all together. And then heading down the circuit, back to that
last circuit, same principle as before. Just hook it up and just terminate the circuit at the end.
Okay, now we're going to hook up a light. And you guessed it, we're going to use a 15 amp circuit
with our 14 gauge wire. Same principle as before, we're going to hook up a ground to a bus,
neutral to a bus. And we're going to hook up the black to the breaker.
And we're going to come over to the switch. Let's start with the ground this time.
Remember we had on the last circuit, we had a ground wire and a ground wire from two different
wires. What we're going to do is the same thing. We're going to create a little pigtail
and bring the two grounds over. And we're going to wire nut them together.
So we've stayed safe, making sure that there's not two wires on one screw.
Then we're going to hook up our neutral wires. And the reason is because the neutral wires aren't
going to break the circuit. It's the hot black wires that are going to break the circuit.
So as we were talking before, you have a circuit and as long as the electrons can flow around,
or as long as the power can flow around in a circle, you're good. What the switch does is break
at a certain point. So the circuit's broken and your light turns off. And so what we'll do is
we'll hook the one black wire up to the first screw. And then we'll bring the other black wire
over to the bottom screw. It really doesn't matter which side you want to put these on
because all you're doing is breaking the circuit. Nothing's really specific here.
And so what's happening is when you flip this breaker on, we'll go and turn our breaker on
just for good practice. We turned our breaker on. Now all of a sudden the circuit's hot.
So now electrons are flowing or our power's flowing over to the first hot screw. You'll
see that our switch is off. So these contacts aren't being made. But now if we turn our switch
on, now the electricity is flowing through contacts made through the switch and it goes
over to the black wire, comes over to your light fixture, and then this light turns on.
And since this is on and completing a circuit, the power is also, electrons are also flowing
back through to your panel box, completing the circuit. Even though I have this little old timer
light, this works with pretty much any light that you have. And a lot of lights I've seen,
they don't really have places to hook up the ground. So don't completely panic.
If there isn't a place to hook up the ground, you just take that ground wire and push it way
up in the box out of the way. And if you have any questions, obviously contact a
real electrician. I just play an electrician on YouTube. I know what I'm doing, but
I can't answer all the questions to every situation. As soon as the circuit is made here,
you can put as many lights on here as you want if these are wired correctly,
which I'll show you how to do that when I'm actually wiring things up.
And then as you wire these things up, the electricity will flow through multiple lights
and then end up completing the circuit. So there's really nothing to be overwhelmed about.
Hooking these circuits up is actually pretty simple. So I can tell you people are pretty
smart just by looking at you. And so we're going to move on to a little bit more advanced circuit,
and this is a three-way circuit. And what this allows you to do is control a light
from two different switches. And these are used for stairways or in large rooms,
or if you have two doorways. The reason I'm using them is because I have two doors.
So what I want to be able to do is walk in this door, turn on the lights, grab a tool,
do whatever I'm going to do in here, and then be lazy and not walk out that door.
I want to walk out the back door. And so what I can do is, as I leave, I flip the switch off
over there and it still turns off all my lights. So same principle here. We have our panel box,
and we have our neutral and our ground hooked up to our bus bars, and we have our breaker.
And so same thing, the 14 gauge wire, the 14-2 wire, is hooked up. And it's pretty simple at
first. It comes over, and it's connected just like we connected our other switch. We came up
here, we hit a screw, and we hooked up our ground, and then we hooked up our neutral.
This is where this gets a little bit trickier with the three-way switch.
Your power comes in on the black screw. And the way these switches work is as you flip the switch
up or down, right now you have it flipped down. So say like this screw would connect to this
terminal. Let's say we flip it up. This screw now conducts to this terminal. And why that's
important is, let's say that the hot power is coming through, the hot or the power is coming up
to this screw. Then let's say that it conducts across from this screw to this screw, and then
goes into this red wire. And this red wire and this black wire are called traveler wires. So
let's say that it goes across to this screw. Now we follow the red across. We come up here. Now look,
our switch is down. So let's say that this black screw is connected to this screw. Well now,
there's no way to conduct across to complete the circuit for the light.
And this is how three-way switches work. Right now you can have power up to this switch because
somewhere power is coming through up to this switch. And this is where it's going to break.
So say that I flip this switch up. Now let's follow the path of the power. I'm getting really
bad shadows here. So now we have the black wire coming over to the black screw. Comes across to
the red to this screw here. Connects to the red wire. Comes across. Hits the red wire. Now it
comes over to this terminal here, this screw here. Now it conducts across. And look what it does. It
hits our light. Power hits our light. Goes back through the neutral wire. It goes back around,
back to our panel blocks. We've completed a circuit. Now let's flip this switch off.
Let's see what it does now. Black wire comes across. Hits this screw here. Comes to this screw.
Now we follow the black wire around. Except for this conducted this way without the switch being
up. Now we have no conduction through this screw to this screw. Which means the power
won't make it to the light. And that's how three-way circuits work is these two switches
kind of work together to break the circuit through these traveler wires. And that's why
you need a 14-3 wire. Because you need this extra wire for traveler wires. So when you wire this
circuit, you're going to wire up the switch just like normal. Just go up to your black screw
wherever the power is coming in at. And then you're going to take the black wire and the red
wire and hook them up to whatever terminal, whatever screw you want. Doesn't even matter.
But when you come over to the other side, be consistent. If you hook the red screw up,
or if you hook the red wire up to the screw on the right, do the same thing here. And hook the
the red wire up to the screw on the right. And same thing with the black. You just want to be
consistent. So these circuits are pretty basic throughout your house. There's different outlets
and stuff you can use with the GFCIs. And I'll wire those in later and explain a little bit more
about what they are. But I just want to do a video on some of the basic wiring. I have a bunch of
friends and stuff that, you know, I always do their wiring or I'm trying to teach them how to do
wiring. And they're interested in learning, but they just need some way to get started. So I hope
this helped you out. I really enjoy teaching people how to do things. I've got comments that
they're like, oh, you know, you do a good job explaining stuff. I try. I do have a master's
degree in education, but I don't teach because I think the education system is a little wrecked
right now. Hopefully they'll fix it. But I do enjoy teaching people. So if there's anything
that you'd like to learn, I mean, I don't know everything, but I certainly, if you have any
questions about these circuits, please put them in the comments and I'll try to answer them.
So I'm going to be buying lumber here in a couple days now that my friends finished up with their
jeep. Try to get things a little bit more organized in here and get all my toys in my toy box. I don't
know, this place is really hard to work in right now. And I'll work on finishing up a couple small
walls that you've basically already seen how they get framed up. So I'm gonna hurry and throw up a
and then I'm going to put those beams on the top and they're not going to be very high.
They're only going to be, I think I'm going to do two by eights just because the span is going to
be very long and I'm going to also build them out of some plywood and I'll show you how I'm going to
put those together. And then after that, I'm going to span, I think it's going to be two by eights
across because I can't seem to find the number one yellow pine. I don't know if anybody out there
knows where you can buy that stuff. Number one yellow pine is like the best stuff. You can span
quite a ways with it. Somehow nobody in my area has it. So that's what I'd like to use, but I
think I'm just going to have to go with a bigger number two pine board, which I'm not thrilled
about, but whatever. So look forward to those videos. If you enjoyed this video, like, share,
and subscribe and stay posted for when I actually wire this up. Should be in a couple weeks.
Hopefully I'll get the beam video out and all these beams done next week, like I've been
yammering on about for the past, I don't know, few weeks about getting that done. And after that,
we'll hit up the electrical and get some real lights in here. So thanks for watching.
