Painting Furniture WITHOUT Sanding or Priming? | Bayberry Green Dresser Makeover

Contruction and Beyond
55 followers
4 Video Views·Nov 2, 2022
In this video, I am painting furniture without sanding or priming, but only on the body, while the top I sand and prime. The top was in too rough of a condition so I decided it needed some proper care. I show the process of using a spray gun with Fusion Mineral Paint in Bayberry, which is super nice green paint, and we see if things can go well with no sanding or priming.
What's up everybody welcome back to the channel and in today's episode we're painting this crawler
dresser that I found on the Facebook marketplace for $75. My original plan was to do no sanding and
no priming which we do but with a twist so you'll see. I love the hardware and the drawers are super
solid wood it's crazy this piece is one of the heavier ones I've done but let's get started.
As you know the first thing we do is remove the hardware and thankfully everything is here we
have no missing hardware so we can use this stuff later I'm going to paint it and it's going to look
awesome. Once you remove all the hardware we need to do some serious cleaning I'm using crud cutter
I just spray the stuff on wipe it around and then I actually grab a damp rag with just water and then
I use that to wipe away any of the crud cutter that's left on the surface and then I just come
back with a dry rag and wipe the water so things are dry. I was going to quickly do this project
and try painting fusion without sanding and priming but the top was just too rough so I'm
going to add primer to the top and sand the top and we're going to compare to the body that I add
no primer and do no sanding so we'll see if there's any difference. I'm going to start sanding the top
with 100 grit sandpaper and then we're going to use 240 grit sandpaper just to make everything
smooth. If I didn't sand the top the paint would have peeled off and if I didn't prime it we
probably would have had bleed through with the wood underneath. I'm priming with Rust-Oleum flat
white spray-on primer. I'm using I'm using Fusion mineral paint in bayberry green and we're going
to be using this in my Wagner Flexio 590 and I'm excited to show you guys this spraying experience
with Fusion. I just add 10% water into the paint which it's not required but I usually add a bit
of water into my spray gun when I spray paint in my Wagner and I find it just helps so much so I
just throw it into the Fusion container what's left and I just shake it up so I can get all
the paint out and into the paint container. Once you mix the water into the paint you really want
to stir together because if you don't it's just going to be water sitting on top of your paint
and that is no good so stir it up nice and right. Do a couple test sprays and you can just feel how
easy this paint comes out and how smooth it is it's it's unreal. So we will spray the Fusion paint
on top over the primer and then we will paint the sides with no primer and it hasn't even been
sanded just cleaned up and degreased so we'll see if there is a really big difference or not
and at this moment I realize this is gonna look pretty cool. Probably the smoothest spraying I've
ever done with the Wagner yet. This is awesome. While waiting for the paint to dry we are gonna
use some crud cutter to spray it on the hardware and then we're gonna actually soak it in water
and then we're gonna scrub everything nice and clean and then I soaked it in water to get rid
of the crud cutter and then I just dried everything with a clean rag. I didn't have any Rust-Oleum
black spray paint left but I had this black rust spray paint that I had kicking around so I'm gonna
use that as the base coat and we're gonna spray it on this hardware now and that dried quicker
than the paint on the dresser so we're gonna use some gold paint and just do a light coat on this
hardware and it's gonna look pretty nice. I use a 600 grit sanding sponge just to sand the top down
before the next coat. Now on to coat number two. Now I'm using Watco lacquer. If I spray three
coats on this it's going to make the paint stay on this hardware for a long time. Now on to our
third and final coat of paint. We'll spray this on right quick and then we can get started on our
poly. After finishing up our final coat of paint we're going to dump the rest of the paint back
into the Fusion paint container. There was less than half left so I definitely used a lot of paint
in this one but we're going to move on to the poly so we're just going to pour this into our
paint container after we cleaned everything out and our paint is now dry on the dresser so
we're going to add a dash of our Fusion green paint in there and we're going to stir everything together
and after all that we are ready to spray the poly. Here is coat one and quickly here's coat two. I'm
only spraying two coats of poly on this project. After the poly dries and the room isn't cloudy
you can go on in and attach your hardware. I'm using my electric screwdriver and it just makes
things so much faster. After the hardware was in I took all the drawers out and I realized I needed
to do some touch-ups so I just took a brush and did the touch-ups I needed and then we were finally
finished and here is the before one more time before we show you the final product and here's
what it looks like after. I must say where I prepped the top it's super smooth and I think if
I didn't prep it we would have had bleed through because all the raw wood was exposed and also it
was super bumpy so I think it really did help. When it comes to the body and the drawers I must
say I was impressed without any sanding or primer the paint seems like it's adhering strong and it's
super smooth and there's no bleed through because I didn't sand but overall I'm pretty happy with
this project. I hope you guys enjoyed this video if you have any questions don't hesitate to ask
in the comment section below and I appreciate every one of you guys watching. Thanks so much
and I'll catch you in the next video.
