MID CENTURY DRESSER MAKEOVER X2 | Furniture Painting & Staining

Contruction and Beyond
55 followers
14 Video Views·Nov 2, 2022
I found these 2 Mid Century dressers on the FB Marketplace and decided to do a furniture makeover using paint and stain. As soon as I find a piece of furniture I begin to think "what kind of flip can we do". In this episode, we use both paint and stain! Although the color didn't come out as dark as I was hoping I still think we can call this furniture flip a success.
Hey, what's up everybody welcome back to the channel in this episode
We are working on these two mid-century dressers that I found on the facebook marketplace
I got these for a pretty good deal fifty dollars each
So they are both solid wood. They're walnut and they are basset furniture
So i'm pretty excited to show you guys this project
So the plan for this episode is to first stain the rounded top drawers
And then paint the rest of the project midnight blue
And then add modern furniture legs and let's not forget to bring the old hardware back to life
Getting started. The first thing I wanted to do was to remove this old
Paper that was glued to the top drawers. It was actually just this drawer and the top drawer to the tallboy dresser
In this dresser, they actually had some it's like a peel and stick material and it was stuck on there pretty good
And dried up so it was hard to peel off. So I just took this guy inside later on and peel it off for myself
It took a bit of time. That's for sure
Anyways, let's get this project going
I'm going to move the furniture to an appropriate place where I can actually get at it to paint clean and remove the drawers
So let's get started
It's always good to wipe your furniture down before you get started. You can use a variety of products
But in this project i'm just using warm water and a rag
And i'll take the drawers out too and we'll wipe up as much dust as we can
After some cleaning we can get started on removing all the hardware since we're dealing with two pretty large dressers here
It did take me some time and plus some were corroded. So that wasn't fun either
I'm using 180 grit sanding paper here with my random orbital sander. So for the bottom drawers
I am just painting so we don't need to remove all the old surface
But i'm just sanding until everything is smooth to touch so you don't see any dents in the paint
And the top rounded drawers I will be sanding directly
Down to the bare wood so we can stain them and make them look as good as possible
You can see that the
Dresser top is in rough shape. There's a lot of scratches throughout so i'm sanding right down to the bare wood here
So it's super smooth when we paint over
I did use a 120 grit sanding paper on the top of the tables and then finish with a
180 just to help get down through that old finish quicker
And of course I did the same thing to the other dresser
After sanding the tops it was still a little bit cloudy in there
But what i'm doing here is getting ready to frame the bottom for new hairpin legs on this piece of furniture
All i'm doing is putting in two by three
Pieces of lumber here and it's just a wide enough piece of wood that I can drill in the new legs for the piece
Just to quickly explain what i'm doing. I'm pre-drilling into the side of the dresser first and then I
Grab my two by three and I pre-drill
Holding the piece of wood where I want it to be just with the first one and then I put the screw in
And then for the second screw I pre-drill first and then I put the second screw in if that makes any sense at all
I think the visual representation will probably give a better idea of what to do than me explaining it with words
So good luck on this part
Of course, I do this to both sides of the dresser and also to
Both of the dressers so now they're both ready for some hairpin legs and we will throw them on when we're done painting and everything
After finishing up and having everything screwed in we don't want to see those screw holes
So we're going to fill them up with some wood filler and let them dry and sand them smooth
After letting everything dry
I grabbed my new mouse detail sander and started sanding everything smooth over the wood filler
And then I sanded the rest of the dressers so we can get ready to prime
After letting all the dust sit I came back with a lightly damp rag
And began wiping up the thick layer of dust on all the furniture
After cleaning up everything I decided to throw up a plastic drop cloth just so I didn't get any
Dust on my project when i'm painting
So i'm using bin 2 alkyd base primer. It's not the shellac base primer, but I don't really need the shellac base for this
Project it can't be cleaned up using water. So I don't want to mess with mineral spirits and all that
So I threw it in a tin foil covered paint tray. So let's get started on our only coat of primer
I decided to roll this stuff on because it would take forever with the brush
and if I sprayed it, it would just make a mess so I just thought rolling it would be the
The smartest way to throw this stuff on
After fully priming the piece and letting the primer dry
I am using a 220 grit sanding sponge just to make sure I get rid of all the
the texture from the from the roller
So i'm using bear ultra scuff defense paint in a midnight blue
This is bear's top rated paint online. So see how it works
I'm using a brush to apply this paint and i'm applying multiple thin coats with the brush
And that's what my buddy that shabby guy does and let me tell you it comes out brush stroke free all the time
I'm using bear thanes classic wood stain in early american pretty much the same as the minwax
wood stain
I'm simply applying this with a clean lint-free rag
Just dab some on the rag and rub it all over the the wood
Go with the wood grain. I think that uh, that helps a nice bit
I don't know what it is, but I think my favorite part is applying wood stain to natural wood and just seeing
What pattern comes out in the wood?
and I must say i'm happy i'm impressed with
With this long drawer here, I think uh, the wood grain that came out was beautiful
After about five minutes of letting the wood stain penetrate into the wood
I just take a clean lint-free rag and just wipe the excess stain off the surface
After the first coat dries
I use my 220 grit sanding sponge all over the painted surface and just make everything as smooth as possible until the next coat
For the second and third coat
I did mix some water in the paint just because it was drying rather quickly as I was brushing
So this will just help keep everything, uh smooth. It helps glide the brush easier
So you don't get a rough surface when it dries
After applying three coats of my bear midnight blue paint
I'm using a polycrylic minwax finish and i'm going to be spraying this on with my wagner
flexio 590
You should always and I always do a test run on the wall
Just throw up some cardboard or paper or something and just make sure your gun is spraying how you want it
So right now i'm actually spraying this on setting five with the wagner flexio 590
and
The amount coming out is very low
Comparing to the last time I sprayed polycrylic in my last video
I must say this time went a lot smoother. I did add a tiny bit of water to the polycrylic
and for some reason it just
Seemed a lot better this time around
I sprayed three coats of polycrylic over the painted areas and for the stained roars. I just use a rust-oleum spray can
Matte clear finish and that worked perfect
Now i'm using barkeeper's friend to clean up the old hardware as you can see the before and afters there
It does pretty well. I actually saw this trick in my new friend
Katie scott salvaged by katie scott's video in her trash to treasure mid mod dresser
so what i'm doing is
Dipping the hardware directly in the water and then I apply barkeeper's friend just all over the damp
damp hardware
And when i'm done with that
I grab a clean rag and just dip it in some water
And then I just scrub the hardware with the barkeeper's friend make sure you get some
Some of the product on there and it really helps rub it off
the hardware i'm cleaning is extremely dirty and
It took a lot of rubbing around the edges here, especially with the odd shape and I also had
18 pieces of hardware to clean. So yeah, it did take some time. I did wear gloves for the remaining hardware
Anyways, I did pop these little metal protectors off the bottom just before we install the new hairpin legs
I'm using a drill just to make things a little bit quicker here to install these hairpin legs. So
glad that I installed a new frame on bottom just gives me a little bit more room to
Screw these in and they're a lot sturdier than what they would be if they were just in that little tiny
thin layer of wood there
Now let's go back here and take a look at these dressers before we started
Now let's look at the final product
all right, all that's left is to
Stage the furniture and get some decent photos and we'll throw these guys up online and hopefully we can sell them quick
If you want to see those final photos i'll have them posted on my instagram
There's a link in the description below. Don't forget to follow me there
Anyways, I hope you guys like this video. Don't forget to subscribe if you aren't yet and don't worry
There's more furniture flips coming your way
