3 DIY DOLLAR TREE CHRISTMAS BUFFALO CHECK FARMHOUSE CHRISTMAS DECOR PROJECTS

New Cottage
211 followers
10 Video Views·Oct 31, 2022
Hey everyone, welcome back to my channel. This is Wendy.
Today we're going to be doing three super cute Dollar Tree DIYs. So the first thing we're going
to use are some foam beads that you can find in the craft area, some little silver jingle bells
in the Christmas department, this styrofoam and there's actually two pieces in there.
We're going to use one of these little toy soldier nutcracker guys and some buffalo check ribbon,
a glass vase, one of the tall ones and then I got this ornament, I think it was actually last year
but they have them this year as well. We're just going to be using the top of that one to embellish
and then scissors, a sharpie pen and some white and black chalk paint and of course our trusty
glue gun. So we're going to start with our base and the styrofoam pieces, these round pieces,
we're just going to use some hot glue and stick those together so that it's a little bit taller
than just the one and then once you get that put together we're going to make an indention from the
glass vase which is going to serve as our dome and I just pushed in really hard but gently at the same
time and just do it like 12 o'clock, six o'clock, three o'clock, six, nine o'clock and then you have
your round indention and then I love this little nutcracker and he's really cute but he has red on
there and I didn't want any red in this project so I just went ahead and took some white chalk paint,
the waverly chalk paint and covered up the red so I didn't see that and then when he's all done
he's just going to be the gray and black and white. So now we're going to wrap the base,
the styrofoam piece with the buffalo check and it's a little wider than the actual base is so
I just put some hot glue around the side to get it started and then I'll go all the way around the top
and put hot glue and then just wrap it all the way around so that the top portion
is exactly in line with the top of the styrofoam and once I got to the end of the
ribbon I cut it off and wanted a nice clean edge so I folded it down, hot glued that to itself
and then hot glued it to close together and then we have a nice little seam at the back.
So now you're going to turn it over and in order to finish the bottom we're just going to make
little slits in the ribbon all the way around so that when we hot glue it it will kind of curve
and meld to the shape of the styrofoam. So there's always price tags on glass items and one way that
you can get rid of that is at the beginning of your project before you start throw a Clorox
wipe on there and then by the time you're ready for it it should be wet enough but the quickest
way is to use some Windex and just spray it on there let it sit for just a second and then you
can just scrape it right off. If you let it sit there a little bit longer you can just do it with
your finger and you don't even have to use the little spatula like I am here and just rub your
finger over it and it pulls the glue up and all the gunk and it's completely gone. So now we're
going to get our snow and we want to first measure how much will look right and based on how tall our
nutcracker is. So in order to do that I'm going to hot glue him right in the middle of the base
making sure that our seam is in the back and then put some of the snow into the vase and then turn
it upside down and see how much you want to put in there and then take it back off because we're
going to still be working on stuff but I went ahead and used my Silhouette Cameo 3 to spell
out the word or the phrase joy to the world which is what we're going to put on the front but I
used the font it's not in the Silhouette Studio. This is kind of like a Ray Dunn inspired font it's
called The Skinny and I downloaded that for free off of dafont.com. So now I'm going to see about
how tall I want it how high I want it so that it's not covering the little nutcracker's face.
So I just put a piece of blue tape there to keep a track of where I wanted it so that when I go to
transfer it onto the glass it's going to I'll know where to put it. So after I remove the vinyl
backing I'm just going to take it and the transfer tape will really stick to glass so you want to be
sure to get it right by not putting it down right away until you get it into the position that you
want but then after you do you just pull the transfer tape off and pull your painter's tape
off and he's all ready. So now the next thing is I'm going to use the top of this bell and it's
so cute as it is the little ornament but I just took this the items off of it took the burlap off
and I kind of made him my own. So this is kind of weird because I tried to make this bow three
different times and I didn't like it. On this one I don't have any small buffalo check ribbon already
so I tried to make it with just cutting him down off of that but then it frayed a lot and so I
then used one that had the edging and the wire at the top and it wouldn't fray as badly but then it
was too short. So third time's a charm and I'm going to use one of the other bows in a different
DIY later on so it wasn't a complete loss. Now I'm just making my little bow and then I'm going
to put some of that greenery up there, hot glue it to the top of that so that it coordinates with
the base and then I have the two little teeny pine cones they're plastic from that ornament
that I just hot glued in the front and then there was a little bit of a mess and hopefully if you're
putting this on your coffee table you're going to see it from all sides. So I went ahead and put
the silver jingle bell on there and then I took him back out and then you gotta
kind of keep control of those little balls because they go everywhere and I had my ceiling fan on
and every time I would take him out or tried to pour some they were flying all over the place so
just be careful of that and then you're just gonna hot glue the base into the styrofoam or the
the dome into the styrofoam but I think he came out really cute. So our next project we're going
to make everybody wants one everybody has one this is going to be the rice filled sock gnome
and of course he's going to have some buffalo check as well to coordinate with everything else
so I had one a used sock a little white one and a big white one and then this is a collar from
my daughter's jacket that she's outgrown and so I'm going to try and use that and it did come out
it worked out well so this is why I don't throw things away some buffalo check that I'm going to
use for his hat and then some white yarn that I just got out of my stash for his little pom-pom
these are those little black rubber bands that you can get at Dollar Tree or anywhere some black
cardstock so that his hat will actually stand up and then just some rice which this is only a one
pound bag but I ended up using probably two and then a glue gun and scissors and I did embellish
with some other stuff too so we'll see that so the first thing you want to do is put your sock
over a cylinder or cup or something big so that it can be your extra set of hands and then just
pour the rice into the sock I got some help from my granddaughter too so she was my second
set of hands just going to bang him down until the rice goes securely into the sock all at the
bottom and it's kind of all settled and then just cut off the excess sock and once that's all
compacted I may have compacted a little too hard because it was a little tough to get the nose
in place but I just used the rubber bands and closed him up at the top and then now I'm trying
to get a big big handful for his nose and you have to take a lot more than you need because it kind
of falls out so we finally got the right size of nose and just put another rubber band around that
and I think it was a good shape for his little nose so now we're going to dress him with that
second sock and I just cut off some of the the sock right above the hill and just dress him
from the bottom up it kind of looks like he has a beanie on but he's actually upside down right now
so where you put the rice in that is the top and then just tuck him under the the nose the
the second sock under the nose and then hot glue it so that it stays in place
and then taking the top part I just glue gun that down so that he was all snug and ready to go so
now for his beard I cut off some of that faux fur and then had to get rid of the lining as well so
there was a lot of cutting and this was a really messy project he had that the fur itself kind of
sheds when you're working with it but once you get it cut it's fine and then I just hot glued
it under his nose make sure it's tucked under so now I needed to make a cone shape and so using a
plate I got the rounded part of it I didn't do it quite right the first time but you'll see you go
kind of three quarters of the way down to the other corner and then just fold it over on itself
and it makes a a cone shape and then I went ahead and traced it onto my buffalo check patterned
material and then just cut that out once you get that cut out you're gonna put those two pieces
together so that my hat will stand up so I just glue gun the edges all the way around and then
made sure of the size that his head was so that I would know where to put it together and then I
just used hot glue and and combined them and made it into the little cone and then hot glued it to
the sock then I decided I wanted to give him a little shave and kind of trimmed his beard to the
shape that I wanted and then using the top part of that first sock that we filled with rice I just
rolled it down onto itself so that it made like a little band for his hat and it you don't even
really need to hot glue it because it was so tight and but I think it looks like a real hat
so now we're gonna make a little pom-pom for the top of his hat and I just grabbed this acorn
wood piece and just wrap a million times so that you can make a nice little pom-pom and then I
should have put the piece of yarn down first and then wrapped around that but it worked out I just
stuck the piece of yarn through it underneath using a pair of scissors and then just tie that
into a knot and then after I tied it I started cutting the little pieces so that I would have
half of it cut and then after I get that done I'm gonna pull it off and tie it in the middle
and then I'll cut the other side so that you it makes a nice full little pom-pom so once he's all
fluffed up and ready he just needs a little haircut again and so I just went ahead and
cut off some straggly pieces and made it more rounded now I'm gonna embellish his little hat
and I just used a little piece of greenery that I had I don't even know where it came from I think
it was just like a an extra piece of Christmas tree or something and I wanted to make him kind
of farmhouse so I added a little piece of cotton um and just attached him with with hot glue and
then to embellish him a little more I put more of those uh small acorn or not acorns um pine cones
and just hot glued those onto his hat as well and then decided he was a little too long the
the greenery was a little too long so I cut a little bit off and then added one more of the
cotton thingies and then I thought he looked pretty good um I did decide to use a couple of
those um these are the little snow things you know when we did the the dome but they were just small
enough and everything seemed so small you're gonna probably burn yourself but I thought it was
a cute little addition and you're kind of limited when you're only doing blacks whites and grays
so these were perfect because they were white and I think they added so much for being so little
so on the back where we made the seam to close up the cone I'm going to glue gun some this is just
some black ribbon that I had on hand I think it's like a grosgrain ribbon but um I just put it on
the seam just to give it a completed finished edge you won't see it and it's optional but just to
finish it up and then I glue gun the pom-pom on top and I think he's all ready so for our final
project we're going to be using guess what our buffalo check ribbon and some greenery and some
twine and this cute ornament that is a little snowman hat that I got of course from Dollar Tree
I had this from a previous project it's just a ball jar but I painted it white already so
a stampin up pad in pink a blender pen a black sharpie pen paint pen and a white paint pen and
I got those at Walmart some scissors and some white and orange paint and my glue gun and then
some other embellishments that I might use later on so the first thing we want to do after you've
painted your jar I actually had painted this in a different kind of paint so it was a little shiny
and I didn't want it to be shiny so I ended up painting over it with the waverly white chalk
paint and then on my ornament there was a topper thing that I wanted to get rid of so
I did some twisting and then realized that you have to just pull it out so then I'm going to
paint the lid because I'm going to still keep it as a jar but I painted that with the black
apple barrel chalk paint and here's the finish on the jar with the chalk paint it's a lot
more rustic looking so I had actually lost the footage of drawing on the face of the snowman so
I had to redo it and then I lost that footage so this is my third time and all we're gonna do
is put some eyes with the black paint pen and I kind of made them a little bit like egg shape but
kind of ovals and they don't have to be exact but try and get them you know as close as you can
and then just fill those in and then I gave him little eyebrows that are just lines to kind of
give him a cute expression and then I'm going to make a smiley face and I want to use kind of
crooked lines and leave a spot open for where the carrot nose is going to go and then just do a
little u right below it so it looks like he's got kind of an open mouth smile and then I used a
to trace where I wanted my carrot for his nose and at first I did it a little bit too small so
this is why we use pencils so that you can erase it if you don't like it and so I just went ahead
and made it a little bit bigger and then when I got it to the shape and angle that I wanted
I took some orange it's actually poster paint and it wasn't going on very well but it turned out
I think perfect because it was a little more muted and softer so it was a happy accident and
I like the way it it looked the color you know was kind of translucent and I like that effect
better than just a completely orange solid paint job another thing I could have used I figured out
later was like the end of a dowel or a skewer because that I was trying to think of what was
carrot shaped but anyway those are just options so there's the face and here's the one I had
originally done so now I'm gonna do the little cheeks and oh there was a little hole from where
I took out the ornament holder so I just found a little snowflake button and put some hot glue
hot glue on there and just stuck him in there and he was done at the top there then I wanted to have
a little button for his scarf and using some Dollar Tree glitter I painted the button because
it wasn't the exact color that I wanted and just gave him a little glitter and then now I'm erasing
my lines and then I'm going to add some of that beard from our gnome in that previous project
I'm going to add that to the bottom of my scarf just to give him some more detail and embellishment
and I think he looks really cute and then I am using that the snowflake I was telling you about
for his little button on the scarf I just put him right there and then I added some
white chalk paint just with a really dry brush and put that all around so it looks like it's
kind of snowed on him and this is where I'm adding the cheeks and using a blender pen which is just
basically like a fluid or just clear moist paint that has no pigment in it and then you just stick
it into whatever color you want to use in this case I'm using a rose color and so it gave him
some cute little blushy cheeks and here he is all done and here's all three of the projects
put together well that was a lot but it was worth it I hope so if you enjoyed this video
please give this a thumbs up comment what you think and if you wouldn't mind we would love if
you would subscribe to our channel as well so thank you all for watching have a blessed day
see you next time bye
