TriCam Industries has a nice range of offerings, including the Gorilla Cart and Gorilla Ladder product lines. In case you are wondering, they DO NOT own the Gorilla Glue brand! That adhesive belongs to … wait for it … The Gorilla Glue Company.
For those of us that have moderate to larger-sized yardscapes, having a good work cart is just about a necessity. Besides the 4-wheeled steel mesh utility carts (the kind you’ve probably noticed at the local nursery or gardening center), Gorilla Cart® offers a robust line of poly tub models. These include the GCG-4 (4 cubic ft., 600 lb. capacity), GCG-7 (7 cubic ft., 1200 lb. capacity), GOR-6 PS (-C) - (6 cubic ft., 1200 lb. capacity), GOR10-COM (10 cubic ft., 1500 lb. capacity), and the GOR10-16 (-C)
The GCG-4 and GCG-7 are both well-constructed homeowner models, while the others are well suited to heavier applications. They have larger tires and heavier axle diameters. The cart we review in this episode is the GCG-7.
We found this cart to be of very good quality. It came well packaged, with the most intuitive set of instructions we’ve encountered in ANY product. The hardware was stretch-wrapped to a numbered card where each batch of hardware corresponded to that step in the instructions. AWESOME! The assembly takes only a 13mm wrench or socket, as well as an adjustable wrench. Assembly took about 25 minutes, including taking time to take photos for this shoot!
One of the best features of this cart is the handle system that can be set up to be either pulled around by hand or attached to a yard tractor. Changeovers are simple and fast.
You can check out Gorilla’s various models by visiting
www.gorillacarts.com.
Special Note: Gorilla Cart was kind enough to provide us this cart at no charge and encouraged us to give it an honest review. There were no stipulations on the review, so we have said in this episode what we wanted to say. We think it is a very good product and are pleased to share our positive recommendation with you, our viewer family!
Hey, Dirt Farmer Jay here from DirtFarmerJay.com. Recently, we got a yard dumping cart from our
friends at Gorilla Kart. It came delivered to our house. We opened the box, laid out the parts,
assembled it, and we've begun to make use of it around our place here. We'll take a look and see
if this cart really makes sense to add to your set of yard tools for your yard scape. Stay tuned.
Hey, Dirt Farmer Jay here. You are looking at Gorilla Kart's model number GCG7
poly dumping cart. This is one of several models that that company makes, and you can find those
listed in the description below. We went through this cart as we built it. We'll show you a lot
of details on it, and so you can make a decision on whether it really is additive for your setting.
Now, before we do that, I want to tell you a really quick story about how this video came to
be. We reviewed, not too long ago, a competing cart from another national brand. It's a two-wheel
cart, more a dumping cart, and one of our viewers wrote in, who happens to be, oh, in our age group
or a little bit older, and said, you know what? That's not my preference, that cart you reviewed,
but I'll tell you the one I'm really crazy about is the Gorilla Kart. That cart really works really
well for me. I recommend you contact that company and see if they'll send one to you for you to take
a look at so you can share with my fellow viewers. So that's what we did. We contacted them in
Minneapolis, St. Paul area in the United States, and wouldn't you know it, not only did they respond,
but they respond spectacularly because the president of the company reached out to me and
said, we would be pleased to send you a cart. We're going to comp you one. You are free to say whatever
you want to say about that cart. We want you to be absolutely honest. We're proud of it, and we
do a lot of testing through all of our consumers and focus groups beforehand, but we think you're
going to like it. So who does that? What kind of major company reaches right out to the president
company? But Gorilla Kart did. Kudos to you guys. So he sent us this cart, and even though it's comp,
we promise to give you an absolutely unbiased view of this cart. I'm going to warn you though,
overall, we do think it's a great product, but after we walk you through it, we'll let you be
the judge. Well, let's begin. The first thing we're going to do though is show you the assembly
and how it comes packaged. So the product arrives in a nice box, and with a bit of muscle,
it's manageable to handle. When you open the carton, it'll reveal all the contents nested
together and poly bagged. And after taking off that bagging, all the parts are ready to lay out.
And that's what we did. Here are all of them laid out along with the instructions, and everything's
ready to go together. The assembly pictogram is easy to follow along with as well. A really
nice touch that they did is the hardware is carded and it's number coded to match the
corresponding steps on the instructions. How cool is that? So we begin with installing the
H-shape undercarriage frame. Square headed bolts are dropped through the holes in the poly tub.
Here, I'm pointing at one of the mounting holes we'll use, and my thumb is next to one of the
bolt heads that have already been installed. Notice how the recess will hold the bolt when a
nut is being tightened onto it, and how the bolt head will not protrude above the poly tub surface.
When the four bolts have been finger tightened, let's cinch them down. Then it's time to attach
the main frame. The next step is a bit finicky though, because it is possible to install
the hardware incorrectly. You will need to install the spacer washer on the side of the H-frame
exactly as I've shown you here. This washer actually serves two purposes. First, it creates a
space between the stationary H-frame, and this avoids having metal to metal contact as the bolt
pivots. Here you can see the frame getting ready to be put in position for the bolts to be inserted,
and then you can see the bolts installed. After you complete that, it's time to install the rear
axle assembly, and it'll take four bolts to do this. I'm pointing to one of the bolt holes,
and one already has the bolt put in ready to be tightened. Notice that there are two more
attachment points at the bottom end of the angle braces. Now, all four bolts are installed and
torqued correctly. Now it's time to install the wheels. Pulling off the shipping caps will reveal
a hole for the wheel retaining clip to be installed after you slip on the wheel. Once the wheel is on,
place the wear washer on the axle, and then install the retaining clip. Now you can turn
the cart over on its wheels, and it'll be easier to work from that point on. Now it's time to
install the dump lock on the front of the tub. Locate the four holes on the front of the tub,
and place the lock on the tub front surface, and align the holes. Insert the bolts from inside the
tub while holding nuts in the hex-shaped holes in the lock. Be sure you put washers under the heads
of the bolts that are against the inside of the tub. Once the lock is properly positioned,
tighten all the bolts. All right, we're almost there. Now let's install the handle. It takes
one bolt, but it's possible to put the handle in the bracket upside down. The way you want to think
of it is you want to position the handle so that when it's upright, it'll be leaned against the tub,
and the handle will tilt in over the tub and stay in position. Insert the bolt, washer, and nut,
and cinch it down. The pull handle is affixed to the front of the handle tube with a pin
and keeper. To convert the cart so you can pull it behind your yard tractor or ATV,
remove the pin, slide back the handle, and then use the pin and keeper to attach the cart to what
you'll be pulling it with. I'll demonstrate more about this function later. Let's go ahead and
point out a few things for you. If you start at the front here, let's look at the wheels themselves.
You can see that they're fully pneumatic, that you inflate them right here. The wheels, as we
showed during the assembly, are easily serviceable, can be taken on and off. It's also easy to put a
drop of oil from time to time in the wheel here, and the diameter and the softness make it so it
has less rolling resistance, and since it has all four wheels, it really does have a nice stance.
So all four wheels are attached the same way, but notice that while the back two are on a
stationary setting, the front two are on a full pivoting axle setup, and this setup allows you
to actually kick all the way around and do a zero degree turning radius. You don't have any kind of
wide roll around. You can just kick back right on itself, which makes it really handy for maneuvering
around to get up next to things, or when you're parking it against a wall or something like that,
it works out very well. As for the way the handle is set up, it's beautiful. The size of this yoke
here is really nice, where if you had to put two hands on it and pull a heavy load, it's going to
work really nice, but it also fits well in the hand, and it's easy to grasp, and it feels very
comfortable, and as I pointed out in the assembly instructions, it's very easy to convert this from
this nice pull to where you can attach it to a yard tractor, let's say, by simply removing the
quick pin like this, pulling that back, letting this drop back, and then that is ready to go back in
as you see. So as we mentioned a little bit ago, make sure when you put the handle tube in that the
goes back over the top of the poly tub, and the reason for that is so that this will lay correctly
and stow nicely without wanting to fall down and be down in the dirt. That's the good stow position
like that. One of the hallmarks of the Gorilla Cart line is their dump function and how they designed
it. Let's show you something really cool that these carts do. The poly tub is secured to the chassis by
both the pivot points on the back, but also this latch on the front, spring loaded, and when it
comes time to dump the load that is in the cart here, you're simply going to lift here and lift
the tub, and as that occurs, watch what's happening to those back tires. That back set of tires kicks
in, gets closer, and actually what happens, the tub gets lighter in my hand, and then finally,
notice that back edge securely on the ground, the load completely dumps out beautifully.
How cool is that? All right, now that you've emptied the load here, you simply go ahead and
lower it back down, bring down the cart tub, and boom, click it in, and you're ready to go. Another
really nice feature that Gorilla Carts design is the set of pockets that are along the edge of the
cart, along the front, along the other side, but not on the back over here, so not to impede the
dump function. Now these pockets are really nicely designed because look at this. Can you see right
there? There's drain holes in them. They're deep enough that if you wanted to put in an accessory
little sidewall to jump up the capacity of the cart for light, fluffy, bulky materials, you could
do so, and a screw could be driven right through the side of this to hold them in place. So these
are really nice. If you look down along the side of the cart, you can see that these are pushed in a
little bit that's kind of bowed in a little bit. Well, that's taken care of when you put a load in
it, or if you put that accessory wall in there, that'll work just great. Well, we think this is
going to be a really nice workhorse around here. It's rated to carry well over a thousand pounds,
and as I said, Gorilla Cart has several different models, smaller and larger. Visit the links below
and you can look and see what they have available for you, or visit your local retailer. They usually
carry the big box stores several models of these carts. Well, we think overall it was a great value.
This cart goes at our local Home Depot for about $168. I've seen them online for that up to around
$200, and for what you pay, we think you get a great value. It's well thought out. The features
work well. The assembly went together really well. The instructions were clear, and the fit
and finish looks really, really nice. If you decide to purchase one of these carts either online
or at your local retailer, I have two recommendations for you. Number one,
put some of the slime in the tires. That is to help them so they don't get flat, or if you get
thorns in them, that you don't end up with a cart that's limping along on three wheels.
Just help the cart help you by servicing it that way to begin with or putting that
preventative in there. Secondly, this is a nice cart. Don't leave it out in the weather.
Sunshine with UV is really hard on these types of materials, whether it's powder coating,
the rubber on the tires, or the poly in the tub. Give it the respect due and keep it as
nice looking as you can for as long as you can so it'll serve you a long time.
Parts are readily available for this cart. I went and checked them out at GorillaCarts.com
to say, hey, look, if I bust that handle or I bend the wheel or I need to replace a bearing
or whatever, are they all available? Yes, they are at very reasonable prices. So not only does
the initial purchase look like it's very positive, but we think the years of service will go well as
well. If you found this video to be helpful or you have things that you would like to offer as well,
please say so below. And better yet, would you like our video and then like our channel? That
allows us to help continue to do these kinds of videos. And if you do subscribe to our channel,
make sure to ring the bell so you'll get notified right away when we put out other videos of this
kind. Hey, thanks for joining us today. And if you decide to get one of these, we think you'll
enjoy it. Until the next time, this is Dirt Farmer Jay from DirtFarmerJay.com.