Macrame Keychain TUTORIAL #1 | DIY Keychain for beginners | Easy pattern STEP BY STEP | WeaveyStudio

Glass Beads
57 followers
143 Video Views·Oct 30, 2022
Hi guys, this is Jeffy. Welcome to Wifi Studio channel. Here are something we need to prepare.
So to get started, I'm going to cut three pieces of cotton cord measured at 60cm long and fold it
in half and you will need three cords in the same length. Each piece is going to fold in half like
that because you're going to use this to make a hat knot. If you bought our DIY kits, don't have
worry about this part because we have already cut it for you. Now you have three separate pieces.
This is how I'm going to put these pieces of cords on this d-ring. So fold it in half,
make sure the two bottom pieces match up one knot longer than the other and then put this through
here like that and put it through and then put the other two pieces on. So I'm using this clear
board to hold down this keychain. If you don't have a clear board, you can just use a tape
and tape it over the keychain to hold it in its place. Let's start in the middle first.
Take cord 2 and cord 3. Cord 2 is on the cord 3. I will twist the cord to make it look stronger.
Make cord 2 come through cord 3. Remember, just move your right hand when you make a knot.
Instead of moving both hands, I will show you again. Only move your right hand. Pull it tight.
Every single cord need two knots. Again, move the right hand only. Two knots for each cord
and only move your right hand. Let's do the other side. Take cord 4 and cord 5. Cord 4 is on the top.
This time, move your left hand only. Two knots for each cord. Take cord 6. Cord 6 is on the cord 5.
Move your left hand only. Two knots for each cord. Move your left hand only. Pull it tight.
Now I'm going to do a square knot. Take cord 2 and cord 5. I'm going to fold cord 2 as a
four shape. Cord 5 is on the top. You don't have to do anything on cord 3 and cord 4.
So always hold them straight. Cord 5 have to come through here. Pull it tight. This time, we will do
in the opposite way. Cord 5 have to do a four shape. Cord 5 is on the cord 2. Cord 2 go under
cord 3 and 4. Pull it tight. We are now doing a diamond pattern. So we have to repeat what we
have done at first. Take cord 5 and 6. Cord 5 is on the cord 6. Remember, only move your right hand.
Take cord 4. Only move your right hand. Two knots each cord.
Take cord 1 and cord 2. Cord 2 is on the cord 1.
Move your left hand only. Two knots each cord. Move your left hand only. Take cord 3.
Move your left hand only. Two knots each cord. Move your left hand only. It's time to close the
first diamond pattern. Cord 3 is on the top. Move left hand only. Two knots each cord.
Same procedure when you start another diamond. Now, I will show you what happen if you move
your both hands when you make a knot. It did not follow the pattern. Let's do it in a correct way.
cord and turn to the back. Use the longest cord to wrap around the keychain. Don't have to worry
about the front side is not perfect enough because we can fix it when we finish the wrapping.
And you will need three cords in the same length. Put it through the hole. If you want to make it
easier, better make a bigger hole before you wrap. Pull the upper cord. Leave the knot inside instead
of put it all out. It's done. Cut the upper remaining cord. Push the remaining cord inside
and you can fix the shape now. You just need to pull the cord to make the keychain looks more
balanced. Now, you can cut your prefer link. This part is optional. If you order our personalized
macrame keychain DIY kit, your order will also come with a leather thread and the wooden alphabet
beads. Make a knot to finish the design.
