Macrame Twisted Wristlet TUTORIAL | purse charm | STEP BY STEP | Beginner Friendly | WeaveyStudio

Glass Beads
57 followers
30 Video Views·Oct 30, 2022
Here are some things that we need to prepare.
Here is our DIY kit. It already includes a D-ray, a micromane cord in correct length.
I'm going to cut three pieces of cotton cords in two different lengths.
You now have three pieces of cotton cords in two different sizes.
I'm showing you the least wasting cord method.
So if you think it's complex to follow, you can just cut three pieces of cotton cords
This is the shortest cord. Fold it in half, and fold it in half again.
Put it on your wrist to check the size.
My cord length is 90cm which for 20cm of wristlet.
Every shortest cord measurement will be like this formula.
Make a hat knot on the D-ring. This cord will be in the middle.
The other two cords will be 210cm.
Before you put it on the D-ring,
one side of the cord needs to be the same length as the middle cord.
The shortest side of the cord is always inside.
This cord is also 210cm.
One side of the cord needs to be the same length as the middle cord.
The shortest length of the cord is always inside.
Here is the final look of making a 20cm wristlet.
The middle of four cords needs to be the same size.
The rest of the cords will be the longest.
I'm using this clipboard to hold down this keychain.
If you don't have a clipboard, you can just use a tape.
Take cord 1 and cord 6.
Make cord 1 as a 4 shape.
Cord 6 is on top.
Cord 6 has to go under cord 2, 3, 4, 5.
For making the whole wristlet, you don't have to do anything for cord 2, 3, 4, 5.
So always hold them straight.
Leave some spaces here.
Keep doing this for multiple times.
When you think the wristlet is over twisted,
you just need to twist the wristlet to another side.
This is the back side.
And that's the front side.
We'll put on a glue on this side.
Fold it in half.
Put it on your wrist to see whether it's your preferring.
We'll cut the cord now.
Pull it tight before you cut.
Lift some cord when you cut it.
We'll put on some glue now.
You can use any glue you want.
And also prepare a sealing clip or any clip you have.
This step is only for some people who want a stronger wristlet.
You can skip this step to 8.37 if you don't want to put on a glue.
After a few minutes, you can check off the sealing clip.
My glue is quick dry so it takes more time if you use glue glue.
Use another cord to wrap around the wristlet.
Turn to the back and do the wrapping knot here.
Pull it tight.
Hide all cords inside.
Put the cord into the circle.
And pull the starting cord until the circle disappears.
Lift the knot inside.
