How to DIY Desk Lamp with Concrete Base and Black Pipe Video

Jakro Builds
11 followers
12 Video Views·Oct 29, 2022
Hey guys, Jakob here. In today's video I will show you how to build this industrial desk lamp.
The build is really simple and you don't need any power tools for build.
Also everything you can buy in local hardware store or Home Depot.
So let's jump on the build. Oh and before I forget,
please subscribe to my YouTube channel. I would really appreciate it. Let's go.
I got this cool glass light covers from my old light which I saved
and now I use it like form for the concrete base.
I use this form to keep the pipe in place and centered.
I just cut it the exact size and use duct tape to cover hole on bottom of the cover which worked fine.
I want have concrete base little darker so I add cement color to concrete and mix it all together.
It was hard removing the concrete from form without damaging the glass
so I decide break the glass. But next time I should wear gloves.
I used scotch brite for cleaning the pipe and also for finish the concrete
which make concrete very smooth and it worked much better than sandpaper.
When I assemble all pipe together I need to figure out which piece
will be last for socket lamp to have good angle. I figure out 90 degree elbow is the best.
Now I need to cut out a little channel for cable in the base.
I use dremel tool and grinding stone blade.
Connecting cable to socket lamp holder.
Please be very careful when you working with electricity. It can be very dangerous.
Before you start working with power ask your electrician for help.
The socket lamp holder I glued to the pipe with super glue.
But epoxy will work probably best. But I didn't have it.
I get this light bulb cage in Home Depot which fit this style perfectly.
But the opening for socket lamp holder was too big so I use double
side tape like a spacer and tied it up with screw which was included.
you
