Heat Transfer Vinyl Tips for Beginners - 5 Useful Heat Transfer Vinyl Tips

Abrine ß X
49 followers
7 Video Views·Oct 28, 2022
What's up, welcome back to another video. My name is Rich and in this video right here
I'm just going to give you guys a few tips on using heat transfer vinyl
So there's a few things that you can and cannot do and there's a few things that you can do to make things easier
so for one
Try to avoid intricate designs and designs that have more so of the grunge texture
So something like this is going to be hard to weed and something like this is going to be very easy to weed
This one right here is going to be hard to weed because it's going to have so many
Areas that you're going to have to pluck off
Here's an example
Okay. So like I said
You don't want to deal with this intricate design
Or stuff that has a whole lot of grunge texture because it's going to be very hard to weed
It might be hard to see
On the vinyl itself so we can put the photo next to it
But let's go ahead and try to weed it so I can show it to you all
Now as you can see it might be kind of difficult to see
There's a whole bunch of little dots. It's going to be very hard to pick all of that off
So there is a workaround, but I don't suggest it. You can like cut a piece of the sticky part off. Um
And just go like that
And that'll get some of the little dots off and give you that grunge texture
But that's a really pain in the butt and it's very time consuming. So I do not recommend doing that
So the second tip would be to have a bottle of vinyl letter removing
um, it's a solvent most of your local stores should have this it's just
Um, I don't know what it's made out of. Let's see
Some kind of chloride. So what what this is going to do?
Let's say you weed some vinyl and all of a sudden you leave a piece off. Well, you know what? Here's an example
All right. So here's your next tip with the solvent. So sometimes when you weed vinyl
Um, there's leftovers everywhere
And sometimes a piece may get stuck to it and you kind of miss it because you're moving so fast
once you press onto a shirt, we might have a little mistake on the shirt because
We didn't notice it. So now it's on the shirt
And this could also happen if you happen to leave like a piece inside of the R or something
So now what we would do, um, but I just realized i'm completely out
What you would do is put the solvent right on top of the vinyl where you messed up and you need to take it off
And it will come right off
So it's very good for that and for like the small little corners and stuff
You can put on a little q-tip and use a q-tip to rub those little areas
Okay
So the third thing would be to have your heat transfer be warmed up before you start weeding it
After the vinyl is done being cut from your vinyl cutter. You want to place the vinyl on
A warm surface such as the bottom part of the heat press you can warm it up a little bit and then start weeding
So here's another example right here
okay, so like I said, it's easier to weed the vinyl whenever this is warmed up if you lay it on top of a
Warmed up surface instead of it being cold
So if you have your heat press already turned on and heat it up, you can go ahead and press it down
Pull it back up and then now this will be nice and warm for you
So what you do is put the vinyl back on and now what I like to do is just brush it over
And it'll be even easier to weed it'll come off a lot easier than it would if it was cold
so
If it's nice and warm then it's easier
So I don't know why I recorded this video in this format going back and forth
I should have just did it all while showing you but anyways, here's tip number four avoid small lettering
Um, you can experiment with this to see how small you can get it
Depending on your vinyl cutter and how accurate it is. It's going to vary per vinyl cutter
But um, if it's very small, it's going to get hard to weed especially if the letters are very thin
so make sure you try to avoid thin fonts for
Small designs because it's going to be hard to weed and depending on the accuracy of your vinyl cutter as well
It could come off while you are weeding it because it is so skinny
It is easy to peel off or it can accidentally come off and it doesn't have enough body to stick onto the
Sticky portion of the heat transfer vinyl whatever the sticky portion is called. Um, i'll show you an example right here
All right
So now like I said, you don't want to deal with small text as you can see
I cut out some small text so I can show you how difficult it can be to weed or the problems that we can have
and right here we have some
Small text as well, but it's a little bit larger than this top one
So what i'm going to do is just peel all of it straight through and i'll show you
What can possibly happen?
Okay, so I peeled it all off as you can see everything is still stuck to the backing the sticky backing
And if you look up here, this is what happens
So some of the letters lift it up. Some of the letters are crooked like the e the a is gone
Um because there's not enough body of the text for it to stay on the sticky part of this vinyl
What is this called?
Anyway, somebody tell me I just call it the sticky backing another difficult thing about small text is if you wanted to get the
Small parts of the letters. It'll be kind of harder to do
Um, you can use the the ice pick type of weeding thing. Um, this is a bonus tip
I like to use these tweezers right here. These tweezers work very well
so, um
Also, it'll be a lot easier to get this larger than it would this smaller a but like I said
It's going to be difficult to uh deal with the small text
Because it doesn't have enough body to stick
And it's also going to be hard to lift the cavities. The cavities is the little inner parts of the letters
So it'll be more difficult to get that
Than a larger size one here. So and for the fifth tip, ah, man
I don't even know how to explain this one go back to the standing up walking version of me
All right. So here's your fifth tip
um, it's a very simple tip so say if you're
Doing the same design on multiple shirts and you already weeded it all out and you have it set to the side
Um for it to be ready to be pressed on the shirt
Don't lay all the divinals directly on top of each other like that
because then it's going to be difficult for you to peel the next one over like
Right here I have to sit here and try to pull the two apart
Instead what you can do is take that one and put this one just like halfway down
So what that's gonna do let's put this third one down as well
So every time you work on a new shirt, you can just peel it right here
boom
another one
boom
A lot easier than if you laid it directly on top of each other
Then you'd have to sit there and try to play with it to get it back off
All right
So those are five
Uh quick and easy tips that hopefully help you work a little more efficient with your heat transfer vinyl
And I wish you the most success if you like this video comment like subscribe and i'll see you next time
Peace and a super super bonus tip make sure you have the adult size shirt not the kid's size shirt
See you next time
