iPhone 6 Microphone Replacement How To Change

Finger Family
30 followers
1 Video View·Oct 28, 2022
iPhone 6 microphone replacement. How to change the microphone in the iPhone 6. iPhone 6 bad mic. iPhone 6 microphone fix. iPhone 6 microphone replacement repair do it yourself and save a lot of money. iPhone 6 microphone repair DIY. I hope this video helps you in successfully changing the microphone in the iPhone 6. Smartphone repair do it yourself DIY is the way to go.
Hey guys, so today I wanted to make a video to show you how to change the microphone in the iPhone 6.
So during this process we're going to be using a few different tools. One of the tools that I'm
going to be using is a suction cup tool and I'll explain in a bit how this works. The other things
that we're going to be using is a phillips screwdriver size 000 and we're going to be
using a small torque screwdriver size zero. So I'll include links in the video description
for these tools that I'm going to be using to work on this or any parts that I'm going to be
using during this process. I'll include links in the video description for them as well if you want
to check them out. So first what we will need to do is in the bottom right down here there's two
little screws and we're going to need to use this torque screwdriver and we're going to need to
remove these two screws right here. So next what we will do is we'll use this handy little suction
tool. Now you can use another suction cup like these ones if you want and you can just put them
on the front here but it's a lot easier to use this tool. They're not very expensive at all and
you can get these tools and what they do is they attach on the front and the back like this. Now
what you want to do is stay as close to the home button as you can down here and if you have a
cracked screen or anything like that you just can put a piece of tape over here like packing tape
and then you have something to adhere to. So what we're going to do is just gently pry up
on this screen. As you can see mine came apart just like that. Now if you have to you can use a
little pry tool to pry in here. I have a little plastic pry tool like this and what you have to
if you get if you need to to get it started a little bit you can pry right under here just a
little bit and then once this thing lets loose you just go ahead and remove it. The next what you need
to do is carefully pry up on the screen here and then there's this plate right here and there's
five screws and you're going to want to remove those and make sure you keep those screws in the
right order because some of them are different sizes. So next what we're going to want to do
is remove this cover right here. I'm just going to use a tweezer so you can see easy enough and
then what we're going to want to do I like to use this plastic pry tool because that way I don't
short anything out for sure. You can use your fingers even if you want your fingernails but
just go ahead and loosen this connector right here and then just go ahead and loosen the
connector right behind it and then this one over here just kind of in order as they come up that
you can take these apart and so there's four connectors and then the back the whole screen
comes off just like that. So next what we're going to want to do is remove these two screws right here
the battery plate cover and they're both phillips screws and you want to make sure to keep track of
them because they're different size. Then we can go ahead and remove this plate cover just pulls
off of there. Next what we want to do is remove this connector right here whether you use your
fingers or a plastic pry tool. Then I would recommend disconnecting this battery connector
right here so we for sure don't short anything out and then we want to remove this antenna wire
right here very carefully and it just pops right off of there. Next what we want to do is remove
these four screws right here they're all phillips screws and they're probably different size so you
just make sure you keep track of where they go. So next we can just pry up on this speaker right here
and with flip it over and then this antenna should pop out of here this there's a little
holder on this antenna it should come out of this speaker right here. So next what you want to do is
remove these two screws out of the vibrator here and then you're going to want to remove all these
phillips screws that you see here just make sure to keep everything in the right order as you take
it out. Next you want to grab this little plastic piece here by the microphone set it aside and you
also want to grab this metal piece right here set it aside. So next to replace the charging port
which has the same part as the headphone jack and the microphone they're all built into the same one
what we're going to want to do is this thing is stuck down pretty good here with adhesive but the
best place I found if you can start back in this corner right here by this hole by this gold part
here it starts peeling up here a little bit and then if you can get it to come up what you want
to do is you can pull up a little bit on this as well to help it a little bit you don't want it too
much to tear it unless of course you don't care about the part that you're replacing but so what
we're going to want to do is just carefully pry up on this just pull up as you go and as you can see
it's kind of coming up here and you just want to keep working your way around and then when you get
down here this is all coming loose here when you get down here what I would recommend to do here is
what you want to do is you want to use something and pry right in here I'm just using my tweezers
here but to pry right in here where this microphone is to get it to come loose because there's some
adhesive sticking it fast so on the headphone jack here if you pry up a little bit on the back side
here and then if you get in one of these holes here you can give it a little push just get it
started a little bit you can kind of wiggle it around as you're doing this too but basically
once once this whole part gets loose once this whole part here gets loose then you just kind of
have to wiggle it sometimes it comes out a little harder than others but you can wiggle it back and
forth and then your whole part comes out just like that now this has the headphone jack the microphone
and the charging port on the same part so to reinstall your part once you have if you have
your new part might have film on the adhesive you might want to peel off so what you want to do is
just grab your part set it right down in here I would recommend doing the headphone jack first
get that placed right in there and then if you get the microphone stuck right in place
and then you can just line these screws up and just kind of tuck this in here here in this little
hole for the vibrator where the vibrator goes you can get that down and then kind of tuck this in
and make sure that it clears up here and then you can just press down really well for everything
and then what we're going to want to do is put our black plastic part in here by the microphone
and we're going to want to put our metal shield down here then you can go ahead and set the
vibrator in here now there's only one way to put the vibrator because it has a little notch over
here that lines up with this hole here so you can see right where it goes it'll only go one way
so when you do that then you can go ahead and put all the screws back in over here don't put this
one in over here any for the speakers but just put all these ones in over here including the vibrator
to reinstall the speaker just grab this antenna wire right here and put this connector back on
the speaker right here and then you can set your speaker right down in where it goes just make sure
it sits down nice and flat go ahead and put your four screws back in next what you will want to do
is reconnect this antenna wire right here now it's a little tricky sometimes it takes a little
doing to get it and you'll just hear it snap right on make sure it's nice and good there then you can
just grab your battery connector pop that in grab this connector put that in and then grab your
battery plate connector and put your two screws back in to reinstall the screen just grab the
screen set it right down in here and just start connecting the connector that's the furthest down
and just keep going in order middle one next and then this one over to the side here you can kind
of feel them firmly snap into place there you'll need to grab your shield right here and go ahead
and put all five of those screws back in now if it's easier what you can do is if you get a couple
screws in to hold this in place you can kind of pull the screen off the side here just be careful
to not pull it too far so you can just rest it down and put the rest of these in so to put your
screen back in just grab your phone and if you kind of tip this up right here this is a little
hard to see because i still have a screen protector here but just kind of tip it up a little like this
keep it apart and then get the top started down in here first
and then you can just kind of press the screen in and just work your way down around make sure
that it's in all the way around and go ahead and put your two screws back in in the bottom
there you go guys you're all set thanks for watching
