Fast Door Cutting While Still Hanging Festool TSC 55 for the WIN

Machines Co.
49 followers
4 Video Views·Oct 27, 2022
In this video we cover a super fast method on how to cut off doors while they are still hanging in place. I'll show you how to accomplish this using the Festool TSC 55 track saw along with the Festool Rapid Clamp. I also cover why its important to cut off the doors to the proper height and
Hey, what's shaking guys? I made a video a while back about pre-assembling mitered casing for
windows and doors and I got some responses back in the comments and a lot of people seem to be
under the impression that you can't pre-assemble in situations where there's proud drywall or
whenever your window jamb is recessed or proud that it throws everything off and your jamb and
your casing is going to be sitting off the wall then or creating all kinds of issues. So in this
video I'm going to show you some of the techniques that I use daily dealing with those situations. I
think it'll be really helpful. There's one technique in particular called rolling a miter
that I'm going to guess that probably the vast majority of people who watch this video have never
actually seen done and don't know about and it'll save you a ton of time. So looking forward to going
through this and let's get right into it here. All right so I've got two pieces of casing here both
cut at a 45 degree miter. Technique number one and probably the most not known technique is called
rolling the miter and what you need to do whenever a casing is extremely proud of the drywall that
requires you to cut a compound cut on that miter. There's different ways you can do it do that
and most of them give you a lot of problems. You could test fit the piece on the corner and then
go back to the saw and try and shave it accordingly. Well a lot of times that will result in your piece
that you cut being too short then and you're trying to fit each piece long and it's a very
very inefficient process. So I'm going to show you this technique called rolling a miter.
It'll save you a ton of time. However real quick before I do show you this technique of how to roll
a miter I've heard the argument said that you can't pre-assemble casing because whenever you
pre-assemble that miter it assumes that everything is all on the same plane. So then if my window
jam material is proud of the drywall and I nail it on here on the front that's going to cause the
back edge of my casing to sit off the drywall and that's why you would need to roll the miter.
However that's no big deal on a casing profile like this that's got a lot of contours and very
little flat area because if it's tilted in you don't tend to notice that. But then a lot of the
profiles I use have a lot of flat on the casing so what will happen is if you try to roll the
miter on a casing profile like this and it's tilted either in or going the opposite way because
the jam is either proud or recessed you go to paint that and it's going to look terrible because
this casing isn't all flat on the same plane. It's got this odd compound angle there and that's
where some of the other techniques I'm going to talk about in order to get your jam where you
want it to be and kind of pull things around are so important because on a profile like this I will
never compound miter this cut. I always want it to be on the same plane nice and flat.
So what you see right here let's pretend that this is my drywall opening and then I've tacked a
couple pieces of random one by shavings on here and this represents my window jam which is proud
of the drywall by quite a bit about a half inch or so. So we're a half inch proud of the drywall.
So here you can see I cut these with just a nice 45 on the saw and if I put them up square
up against this you can see that that miter is perfect but then what happens whenever I go to
install my nice 45 degree miter cut on this window and my jam is proud that's how bad it throws off
that miter cut. I also want you to notice that up here and back here it's a different size gap
meaning if I just set my miter saw to do a back cut on this this miter cut is still going to be
off. So we actually have a compound miter meaning I need to adjust my miter saw this way and this
way all at the same time and that's going to be really inefficient so there's an extremely
simple way to deal with that. So making this cut on the miter saw so that it's a perfect miter is
actually really simple and you don't have to adjust your bevel or your whatever you'd call
it your other angle. Neither of the angles you have to adjust you can leave them both
set perfectly plumb at zero and set your detent at 45 and here's how you do it. You need to take
another piece of material that matches the thickness of how far your jam is off the drywall
so here I've got this other piece of scrap which is not even perfect it's about a 30 second over
but it's close enough and I'm going to take this with me whenever I redo this cut on the saw I'll
show you how that works. So now I'm back over here at the miter saw and what you're actually
doing is you're matching the position of the casing as it will be installed on the window
with the proud jam so I'm not cutting it perfectly flat on the table I'm going to use my piece that
matches the thickness of the jam is off of the drywall and I'm going to put it under the piece
of casing and I'm going to make my 45 degree cut then and then it'll be perfect. This is actually
the exact same concept that you would use when cutting crown molding in the nested position
it's the exact same thing you cut crown in the nested position as it's going to be installed
up on the ceiling and that's exactly what we're doing with the casing here we're essentially
cutting it nested as it's going to be installed on the wall and then that 45 degree cut will be
perfect. So I've got my shim piece installed under the front edge of the casing to match how much my
jam is proud and I'll make this 45 degree cut I'll make the 45 degree cut on the other side also
okay well let's see how they fit now okay so back at our proud window jam I just cut these
now let's see how they fit whenever we put them on the jam so you can see how that cut
is the perfect compound cut and I never had to adjust my saw in either direction
it's cut at 45 and it fits perfectly because I cutted it in the nested position
now again just to go back let's put this cut in here square again and I don't know if the camera
will pick this up but it's all gappy across the front and you can see the gap back here
that cut would no longer work if it was flat and you could see a standard cut
you know that's that's how that works out with just a regular 45 degree cut so simply by raising
our front edge of the casing up whenever we cut it at the miter saw that miter is now perfect
so then for the guys who say that the mitered casing can't be pre-assembled
whenever the jams are proud you can see that that's not accurate at all they can be
pre-assembled still so that's a very tight joint cut at a compound angle
so as great as this technique is for dealing with a proud window jam this is the casing I'm
using on this current house and I've got it upside down just to show you how severely back
cut that is so now we'll flip it over and let's say I went to install this on a window there is
such a severe hump right here that with this flat casing it looks absolutely terrible this is a
bit lower view but you can see how this square actually rocks on on that miter that would look
terrible painted up so we always want to keep this plain flat so with a casing profile like this
rolling the miter is not a good option and that's where we'll go with the next techniques I'm going
to show you just some of the things that I do fairly often to help correct those issues with
drywall and placement probably the number one thing though the old saying applies where an ounce
of prevention is worth a pound of cure meaning it's a whole lot easier to just do it right from
the beginning I'm very thankful the framing crew that I follow with my main builder actually does
a really good job of getting the doors and windows where they're supposed to be and I don't have any
major issues to deal with very often and that's actually even as a subcontractor that's a pull
to keep you with a builder whenever you're following other sub trades who do a good job
before you and actually make the job easier so I'm actually a little bit spoiled in that regard
I went around this house that I'm working on currently and I couldn't even find any really
horrible drywall situations as far as jams being recessed or proud
but you know it is what it is follow a good framer whenever you find a good builder
stick with them and it'll it'll help you be more profitable
