Packout Drawers My Favorite Carpentry Work Van Setup Yet

Machines Co.
49 followers
16 Video Views·Oct 29, 2022
I redesigned my tool storage system and tool deployment workflow. In this video we take a look at how the Milwaukee Packout Drawers are game changers from an efficiency and ease of use perspective. I show how I'm utilizing a folding ramp now with my van as a part of my system for
I've had a lot of van trailer truck setups
over the years that I've been in construction.
And this is by far the best setup that I've had yet.
Made a couple of huge improvements
with the new packout drawers.
I got a ramp, a hand truck, couple really cool things,
my own custom dolly that I wanna show you in this video.
It's been an awesome system to work out of.
I've been using it for about three or four months now,
basically since I could get my hands on the packout drawers.
But I'll show you what I've got
and see maybe if you can use some of these ideas
for your own setups.
First off, I apologize in advance
if the lighting isn't perfect,
trying to film outdoors with a bunch of white surfaces
and then inside a dark van is not ideal conditions,
but I'll do my best.
First thing you'll notice,
my side door right here opens up.
I've got my hand truck strapped over here.
We'll see more on that in a bit.
Tool belt on a hook up high, keeps it out of the way.
And then over here, this time of year,
gotta have the golf clubs on the van at all times
for emergency situations.
So I like to just deploy those quickly,
just real quick on and off the hook for whenever I need them.
So we'll just take those out for now.
Levels are always one of those difficult things
to find a good storage for.
Here on this wall is where I keep mine,
keep them all in the vertical position.
And I made these custom blocks to hang them on.
So you can stack them two deep with this little block,
one on there.
So if I've got one of these levels off,
it still won't fall off in transit.
And then if I want to put two on,
I'll just slide the other one on there.
It's not going anywhere.
As we go straight forward into the van here,
this is where the major improvements happened
with the new packout drawer systems.
You can see I've got two different stacks
and they're on a custom dolly that I made
that I will show a little bit more of in the video.
As we move forward into the van,
this is where the real magic happened
on the newest upgrades.
We've got the packout drawers, mostly two drawer units.
And then at the bottom here,
you'll see these custom dollies that I made.
Those work really well and they tie into the design
of using this hand truck in this whole system.
And then on my partition wall here,
I've got this folding ramp
and that's a really key component that I'm using now also.
A few considerations when designing shelving for your van.
One of the biggest things for me
is I want to be able to quickly deploy my tools.
But one of the things that tears us up as tradesmen
is stepping up in and out of a vehicle all day long,
multiple times a day.
And then also on your arms,
carrying these huge boxes full of heavy tools,
I think just tears the crap out of your shoulders.
So anything I can do to mitigate those two things,
less stepping in and out
and less carrying things with my arm,
less weight on my knees as I'm stepping
in and out of the van, that's a win.
So as I tried to design my van,
I wanted to keep as much stuff on wheels as possible.
So I divided my partitions up to as many bays as possible
where I could keep tools on wheels.
You'll notice right here,
I've got my table saw, it's on wheels.
Moving down, I can't put the vertical bays here
with things on wheels because of the wheel wells.
So you have this center area in the van,
which I just kind of have to do whatever with that.
But then down here,
we've got two bays with packout drawer units.
So I'll show you a little bit how these are in place
and don't move around in transit.
It was pretty cool what I came up with for that.
But so rolling units here, rolling units here.
And then as we come down around to the other side,
here I've got my one remaining stack of Festool stuff
that is on their CISROL cart.
And again, we've got the wheel well issue here.
So nothing on wheels in this area.
Then moving down here, I have what I call my power tower,
which is my custom packout dolly
with my air compressor, microwave,
and complete charging station for batteries
and stuff like that.
That'll also roll in and out.
The absolute game changer with the packout drawers
was that it allowed us as tradesmen
to have drawers the whole way up the stack
and have wheels at the bottom.
Whereas before you had to have
the packout large toolbox with the wheel base on it.
So then in that situation, you had the lid on that toolbox.
And if you wanted to get into what was inside that toolbox,
you had to unstack everything from on top of it,
which was a huge pain.
So beautiful thing about these units
is you can access everything while you're in your van
and you don't have to unstack any boxes.
Same for on the job site.
I can roll these into a closet that I will deadbolt shut
and lock my tools up at night or whatever.
And it's just a really tall stack.
So it's not taking up a bunch of real estate
on the job site.
Same thing, you know, over here, just easy to access stuff.
So all that being said, that creates another problem.
We've got these awesome toolboxes.
They are big and they do get very heavy.
So how do we get these beautiful drawer units
on and off the van?
Again, without tearing up our bodies in the process.
That is where the ramp comes in.
My good friend Justin has been using a ramp for years
and I should have listened to him a long time ago
because I bought this folding aluminum ramp
and it is an absolute game changer.
I considered a few different places
where I could store this ramp
and up against my partition ended up being the best place
that I could find with the existing setup that I had.
So it's pretty lightweight, just one strap up here,
holds it in place, no big deal.
And then as you can see, I'm doing this all one-handed.
We'll just pull it out.
It's really easy to set up, just unfold it.
And I drilled some holes up here on the front
because you don't want this sucker slipping off
whenever you're walking on it
or rolling something up and down,
you could injure yourself really bad.
So I've got a hole up here where I just stick a bolt through
and then the ramp can't go anywhere.
Next, I'm gonna simulate my tool deployment
as if I was rolling up to a job site.
I'll probably speed this up in the video a little bit,
but let's just see what time it is
and how long it takes to roll out all these tools.
It's 921, so we'll see how long this takes.
So there we go, it's just rolled over to 926.
Five minutes to roll all this stuff out.
And I've got basically all of my tools on the job site now.
Now obviously it'd be a little bit longer
if you're farther away from your van,
but the other beautiful thing about using the hand truck
is you've got your tools on wheels.
So you're really good to go
unless you've just got some really, really rough terrain.
And I don't usually run into that too much.
Usually I can get my van fairly close to the job site
where that's not an issue.
The other huge thing that you have to take into account
is that I did not physically strain myself at all
to get all these tools off.
This is a ton of weight in tools.
And to be able to get that off of your van
without having to physically exert yourself or,
look, I mean, we just pull, look at these boxes are huge.
You try and carry those around.
It's just a ton of weight on your knees,
stepping in and out,
ton of weight on your shoulders,
twisting and turning with these big handles.
I think having things on wheels with a hand truck
with a dolly base makes so much sense.
I looked around a lot at different hand trucks
to use with this dolly system, what would work well.
And one of the things that I needed
was I needed a hand truck that I could still stack stuff on
and pull it up into the van,
even if I didn't have my ramp.
So believe it or not,
this hand truck is actually made by Milwaukee.
And what I really like is it's got this stair climbing kit,
I guess you would call it,
but it runs all the way down the side
and it's got about an inch and a half,
two inch offset with the back of the wheel here.
And that's what you need to be able to pull a stack
up into your van without the wheels hanging up
on your bumper or your floor.
With other hand trucks, I tried that in a previous video,
some of you might remember, doesn't work well,
puts a lot of strain on your back,
but this hand truck works well for that.
Okay, so I'm gonna put this stuff away now,
but before we do that,
I wanna show you the retention system
that I came up with inside the van partitions
to keep the packout stacks
from coming out of inside of their partitions
or falling over during transit,
but it still gives me access to all the drawers.
So I'll show you that next.
As you can see here,
I've got this odd bungee cord arrangement here,
but it works awesome.
Whenever I slide my packouts into this partition,
all I have to do is grab this strap with my finger,
pull it forward and hook it on
to the front of the packout drawers
and it works really well.
So it's just one bungee strap,
and then I use plumbing fittings.
Those are half inch copper fittings.
It's just what I had on hand at the shop
whenever I was trying to figure this all out
and it works really well to hold those in place.
You probably could come up with something
a little bit better
that might not cut into the bungee cord as well,
but like I said,
this was just what I had on hand
whenever I was trying to come up with something
to keep these things from moving around in transit.
These stacks are super heavy,
so I like to grab my partition with one hand
just to give me a little assist in pulling it up,
but it's not too bad.
The other nice thing
is that whenever you have the dolly underneath,
you really just need the hand truck
to get the stack into your van.
And then you can just wheel it around
on the floor into place.
Come on now.
There we go.
So then all I gotta do is grab my straps,
strap this thing in place,
and I've still got access to everything in my drawers
if I'm working out of my van
versus deploying these all on the job site.
There are also locks on the caster wheels at the bottom,
so I'll go ahead and push those down also,
and that'll also help prevent the wheels from moving.
Now, after you're done with your ramp,
I just pull the bolt out right here,
and I just leave that up front here,
fold it over,
and the ramp stows away up there pretty nicely.
Final thoughts,
this is the best system that I have personally used
and customized for myself
of all the things that I've done over the years.
I love it.
See, these aren't coming out.
Whenever you're doing punch work,
we all know we don't wanna get
all of our tools out at one time,
and that's where the Milwaukee Packout drawers
are a game changer.
I just can't say enough good about them
because I've been able to work out of my van
without having to move the boxes out.
I can just come right in here,
and if I need a nailer,
I can open a drawer in the middle of this stack.
If I need my clam clamps,
I can come down to the bottom of the stack
and open a drawer and get to my stuff,
and that is something that I have not ever had before,
so absolutely love this.
If you've got any more questions, let me know.
I'm also gonna make a video showing you
what I put in these drawers,
so look for that video to come out sometime after this one,
and I'll show you how I've got my tools
set up in these drawers,
and I think you might enjoy that also.
So hope you enjoyed the video.
If you're new here,
don't forget to subscribe for more content like this.
Give the video a thumbs up and drop a comment
if you've got any questions,
and let me know what you think of this whole system.
Appreciate you watching,
and we'll see you on the next one.
Bye-bye.
Bye.
