Make a Concrete Bowl and More!

Ceramik
19 followers
16 Video Views·Oct 27, 2022
What is happening everybody? My name is Michael and I'm going to show you how to make a concrete
bowl out of, well, bowls. It's a very highly requested video, so let's get started. And
if you're new here, welcome to the channel. So let's make something cool.
All right, we are going to get all Pinterest-y up in here again. You wouldn't believe how simple
this is and how quick and easy and how many different projects that you can do with just
a simple concrete bowl. So let's get started. The material we're going to use is the RapidSet
Mortar Mix, of course, along with the flow control, because that's going to make our
life a lot easier. We're going to start by cleaning these bowls up real good and spraying
them down with WD-40. Wipe up the excess, make sure there's no puddling. I know, you've seen
me do this a million times, right? And as usual, there's going to be links in the description below
for all the materials and tools I'm using in this video, including the exact same bowls that I'm
using. But you can use any bowls you want. All right, let's mix up our concrete. You didn't know
these come in 25-pound boxes, did you? This bowl is about 9 inches in diameter. I found that one
quart, one scoop of this stuff is a good amount of material for this size bowl. Hook up our drill
to our little paint mixing paddle. Don't forget to turn your drill down to low speed, high torque.
Made a mistake in the last video with that. Thank you for making that comment, sir.
We're going to go for a peanut butter consistency, four parts product to one part water.
So there's our peanut butter consistency, but I want to pour this, so that's why I'm going to add
the flow control. This will take me to like a pancake batter consistency, like a tablespoon or
two for this amount. Whatever you do, don't add more water to get that kind of consistency because
you're going to make it so much weaker. Pour it in there until it's about halfway full. Let's try
that out. That's pretty much perfect. I could probably add a little more, but let's add a
little more. Kind of eyeball it and center it. Now, what I see a lot of people do in these concrete
bowl videos is they pour some rocks in here to weigh the inner bowl down. But to me, that's too
much Indiana Jones and very simply take a stick, put it across the middle, make sure you're still
centered and put a couple of bricks on top. Simple as that. Just tap it with a hammer, work those
bubbles out. Who am I kidding? That was still pretty Indiana Jones, right? You could also take a sander
and vibrate the edges to work those bubbles out. A lot easier, a lot quicker. I'm just too lazy to
plug it in. By the way, stay tuned till the end of the video. We haven't done a giveaway in a while.
I think I want to do another giveaway. All right, we're going to let that cook for about an hour.
We're going to flip it over and demold it very gingerly and we'll go from there. With the Rapids
at Mortemix, we can demold this in one hour. We could use other products like a Portland-based
product, but we'd have to wait at least three days to a week to be able to demold it. And ain't nobody
got time for that. All right, now we are going to gingerly take this out of the mold.
Now we got some little rough edges right here. No big deal. You can
use your bricks. It's kind of like sandpaper. And there you got it. Quick and easy concrete bowl.
All right, Michael, so you've shown us how to make a concrete bowl. So what? What am I supposed to do
with said bowl? The question is, what can't you do with said bowl? Come on, I'll show you.
Okay, so not quite the dramatic look I was going for. Not doing quite what I wanted to do, but you
get the idea. One bowl is supposed to spill into the next bowl, which is supposed to go into the
next one. All we got to do is play with this a little. Tilt the bowls. I probably have to like
groove some spouts in here or something like that. But think of how far we could take something like
this just with simple concrete bowls and like six cinder blocks. But I can already see that this is
going to need a video all on its own, just out of respect and on principle alone. Maybe coat the
outside in some mortar mix or something like that. Make it look real good. Maybe add some texture or
something like that. With that being said, it is really cold and windy outside. Let's go inside
the shed and let's do that giveaway, shall we? So because you guys are the best subscribers on
YouTube, I wanted to do another giveaway, a box of goodies, if you will. The box of goodies will
include titanium drill bit set, Milwaukee impact driver set, an 11-in-1 tool, this is kind of cool,
a Milwaukee tape measure that was obviously named after me, and a Milwaukee t-shirt, large.
If that doesn't fit you, I don't know what to tell you. So there will be a link down below.
We're going to give it two weeks and then I'll announce the winner and I'll send that right off
to you. Thank you so much for watching my videos. If you haven't subscribed yet, please think about
subscribing. I promise you won't regret it. And I'll see you in the next video.
