DRY CLEAN CLOTHES AT HOME without WOOLITE OR DRYEL

Artistic Cutz
17 followers
9 Video Views·Oct 27, 2022
Hi everyone, I'm Angelina and this is BlueprintDIY
where we remake our clothes to be just as unique as us.
I am super excited for today
because you guys chose this upcycle.
I put out a list of things that you guys have been
suggesting and things that I've been seeing
and you guys went crazy for three and five.
So today I am finally doing number five
because I felt like it could be worn by more body types.
So I hope you guys are excited
and I have a super exciting surprise,
Mother's Day surprise for you guys at the end.
So let's get right into it.
All right, so I am finally going to upcycle
the rest of these overall jeans.
I don't know if you guys remember this project,
but I cut off the bib and made, you know,
like a tank top or something out of it.
But I am finally gonna use the rest of these jeans.
I just wanna make sure that I have plenty.
If you don't have a giant pair of jeans,
you can definitely piece together a few pairs of jeans
and I'm sure that will work as well.
All right, so once again, the first thing we want to do
is take a couple of measurements
and I'm gonna walk you through that.
The first one I'm gonna take is in between my breastbone
down to the length that I want this top to be.
And for you, that can be whatever you want it to be.
Oh, I think I'm gonna make mine from here
to right at my belly button for now.
So that is a little bit past nine inches.
Then you also wanna take a measurement
around your underbust.
And for me, that's 33 inches.
And I just wanna verify whether right at my belly button
where I took the bottom measurement is about the same
because you definitely, if that measurement is bigger,
you want to kind of flare out
that bottom part of your shirt.
And so, yeah, mine is a little bit bigger.
It's about 35 in that area.
So I definitely want to account for that.
And I also wanna measure right up at my shoulders
where the inside of that shirt is gonna be
because we're gonna do part of this flat
and I just wanna make sure I have a measurement for that.
All right, so the next measurement you're gonna take
is from your shoulder, the top of your shoulder,
down to the bottom of your bra.
And so mine hits about right there.
So I'm gonna mark all of these down
and we can begin cutting our denim
according to these measurements.
If you haven't subscribed, what are you waiting for?
Hit that subscribe button right down below
and hit the bell to turn on all notifications
so you don't miss a thing
because when I hit 100K and we are almost there,
I'm doing a special upcycle for one subscriber.
One subscriber will win a special upcycle made by me.
And so definitely subscribe and share this video
so everyone knows all the amazing stuff going on here.
Okay, so I have my jeans here
and I am going to just fold them in half.
The first thing I'm going to do is take that measurement
where I measured from in between my chest
down to how long I want the top to be.
And I do wanna say that mine actually measured nine inches.
I gave it 10 inches to be safe
and I'm cutting it 11 inches for seam allowance.
All right, so the next thing I'm gonna do
is cut each one at the flat fell seam.
You may not have one of these seams
or you may only have one
and you may choose to use the length of a pair of jeans,
which is perfectly okay as well.
And I'm just cutting as close to the seam as possible.
And now I'm gonna take it to my sewing machine
and sew one flat fell seam on top of just the regular jeans
to make this one long piece.
Okay, so at this stage, you're going to need a bra.
This is just so that you have something
that you're going to use in order to make this curve.
So you want to make sure you leave a seam allowance
and put the top above the middle part of the bra.
And then we're just gonna mark a curve.
And the reason I'm not going underneath the cup
is because I have to have seam allowance down.
You know, make it straight on till we go to the back.
All right, so we can remove our bra and that's what we have.
The reason I did two marks is because I always want to see,
I always play to the one that cuts off the least.
So I think I did this one lower,
so I'll probably fold it in half and cut to that side.
And then I'll just keep cutting straight
all the way to the end.
All right, so this is what I have.
And I have plenty of room left in the back,
so I don't have to worry about it not fitting.
Okay, so can you see that this
is the jeans turned upside down
and this is the middle of the crotch part right here.
So I'm gonna get the other piece
and see if we can't patch them together to make the V-neck.
All right, that may just work.
All right, so we took that measurement
that goes from the bottom of the bra
to the top of our shoulder,
which was 13 and three quarters.
So that is from here up.
And I can add a pin right there.
And I want to make sure I get this
so that it's up where I put the pin.
It's 10 inches apart,
because remember we measured that cross.
All right, so we are going to just start to pin.
I'm not exactly sure how to make this make sense for you,
other than to just show you what I am doing.
So my hope is that that will be enough.
All right, so we're gonna draw a preliminary curve.
There is another dart that needs to happen
over on this side over here,
but I'm not gonna do it yet.
I'm going to go ahead and start to draw my curve.
And I'm lifting it up
just to make sure I have seam allowance.
And if you didn't see Tuesday's,
or I'm sorry,
and if you didn't see Thursday's video,
these pins are heat erasable.
They're specifically for marking on fabric.
And when you use an iron,
you can make the pin disappear.
So that's why I am so happy to have them.
And I draw freely now without my sliver of soap.
I do want to make note of my dart though,
before I take this.
All right, so now I'm gonna unpin these,
lay them back to back,
and then cut them out.
All right, so now it's time to pin it on us.
And I'm going to pin in the darts.
And I'm doing everything on the wrong side
so that I don't have to take it apart.
So I'm just gonna clip these two seams together,
making sure that the dart is pinned there.
And there's going to actually need to be another dart
on the end.
That'll be for the next fitting.
But next I'll get my pin
and mark where my shoulder is
so that I know where the beginning of that sleeve
needs to go.
And I can mark like right under here.
All right, so then I'll take this a loose,
take these apart for right now.
And I can put the two pieces back together again
and then cut this part out.
All right, so where I drew the lines for my dart,
I'm gonna cut right in between there
and sew those together.
And then instead of making my dart straight,
I'm gonna make my dart like a curve
because my chest is a curve.
All right, so I'm gonna pin these two together
and I'm only going to sew like right past the cup.
I'm not gonna sew it all the way to the end,
not just yet.
You can actually do this in a basting stitch
because I find that this part in particular
is a part that I take apart a lot and put back together
because sometimes it just doesn't work, you know?
All right, so that's what we got going on so far.
I'm gonna go ahead and sew the other side
and then we can see how it looks.
All right, so I have it on.
I have both sides attached.
I have it on.
And of course, this middle section,
always I need to bring it in more,
but I purposely didn't, you know, put it all the way
because, you know, you always wanna have room
to do what you need to do.
And I have it pinned in the back once again
and I also have it pinned up on my shoulder
just so I can keep it up right now.
But this is the other dart that I was talking about.
I pinned this part
because I remember we didn't sew it all the way back.
I pinned that.
You can see on this side, it's okay if it's angled,
but now it's not.
Once you get to the back, it's not covering my bra.
So if you wanna do it that way,
you can most certainly do whatever you like.
As I bring it up to this point
and I'm gonna pin that down.
And if I didn't say already in this video,
if you have a dress form, use it.
This project will be much easier on my dress form,
but I'm gonna do it without the dress form
because I know a lot of you don't have one.
Once we have it up like that,
you can see we have this puckering right here.
So even on the picture, there is two pieces.
There's this part and then this part.
In order to get around that,
we're going to add another dart right here,
all the way from the top to the bottom,
just like I have it here.
And you just wanna do what's natural.
You know, do what naturally wants to happen.
Then we'll have to add another piece in the back
plus our strap extensions to make it,
you know, close in the back.
All right, so, ouch.
So did it that time.
Okay, so I want to mark off my darts
so that I can get those taken care of.
And I'll do it just like I did before.
Mark all the way from the top to the bottom.
And I'm gonna, when I sew these,
I'm gonna curve these as well, just a little bit.
All right, so in order to finish off this piece,
like I said, I have quite a bit of extra in the back.
So I only need a small piece, probably about that much.
And then I need straps to complete the back.
So I have these pieces that were cut off the bodice piece.
So, and it has a flat fell seam.
So I'm gonna use some of that for the rest of the strap.
And I need a piece right there.
I have these seams that just barely miss.
Like if they were further, it wouldn't bother me so much,
but because they're just like so close, but not quite,
no cigar, I think I want to add a seam to make them hit.
The other thing I can do instead of adding an extra seam,
I can just go ahead and cut that one off
and add my extra piece here.
That way I don't have an extra seam
and it just looks all continuous.
All right, so then we are going to sew
the rest of this piece together
so that we can get close to putting in a zipper
into this bad boy.
I had it on, I had it pinned it in the back.
What I want to do is either get some pins
and add it right in that area
where it's gonna come together,
or I can get my little erasable pen
and mark it in that area.
I want to mark right on top of my shoulder.
So if I have these out, you know,
that 10 inches that I want them,
I want to mark right on top of my shoulder
because that's where my seam should be for my sleeve.
If I put my sleeve way out here,
then that sleeve is gonna be weird.
So I want it to be right up
on that shoulder bone right there.
And I'm gonna serge everything on the inside.
I'll show you guys the inside.
I'm gonna serge everything on the inside
before I do any top stitching.
Look at them seams, look at them seams.
Love it, love it, love it, love it, love it, love it.
All right, so we have top stitched our strap
and everything is ready for some sleeves.
So what I want to do is right at that part
where we added that second dart,
I want to kind of measure a little bit.
This is a rough measurement of how long
the curve on my sleeve needs to be.
Yeah, I'm gonna give myself roughly 20 inches.
So I want my inside, it's gonna be a moon shape.
The pattern for this is a moon shape.
And basically I want that inside,
the inside curve to be at least 20 inches.
French curve will work perfect for this.
In architecture, we use this little thing.
What it's called, I don't know,
but you can shape it, form it
and shape it into different curves.
And so, okay, so I have at least 20 inches.
So I'm just gonna mark
and then we're gonna mark our outside curve.
And this distance is how far that sleeve
is gonna pop off of your shoulder.
So, you know, you can dictate what you want that to be.
All right, so I have my two sleeves.
This is the outside of the sleeve.
This is the part that connects to the armhole.
And so I'm just going to double fold hem the outside edge
and then we can pin it to our garment
and sew the inside together.
Okay, so this is the chest part.
This is the strap that goes across our shoulder.
Right here, you can't see it, I'm sure,
but there's a little mark where we marked
right on top of our shoulder.
I'm gonna fold my sleeve piece in half
and then lay it on there, good side to good side,
so that the top of the sleeve, the biggest part,
is kind of right at the shoulder.
And I can actually move it back a little bit
because it's going a little bit further than I thought here.
And then I'm gonna pin that down.
And then when I get towards the back,
I want to begin to straighten it out.
And then I'll mirror the, ah!
Then I'll mirror it on the other side
so that they both look the same.
And I'll go and sew it together.
And at the same time, I can also, while I'm doing that,
I can serge my edges and then top stitch this as well.
All right, so if you guys get stuck on this project,
definitely check the description box
for the link to my Facebook group.
It's free and it's just a group of upcyclers
who help one another out when we get stuck.
We get to show our before and after
and everyone celebrates you.
All right, so we are almost finished.
Let's put in this zipper.
I have the marks where it was fitting
and I pretty much got my lines lined up.
I'm super excited about that.
We're just gonna baste in the zipper and see if that works.
It might be, you know, it might work the first time.
It might not.
So I am just going to pin my zipper in,
line everything up.
This is a separating zipper,
so it's nice because we'll be able to completely unzip it
and do each part.
All right, so now I can completely unzip it
and baste each side down.
Yes, it fits, it fits, it fits, it fits.
I'm thinking that I want the strap right there
to line up with the line right there.
So I just need to mark the strap where it needs to connect.
And consequently, it happens to be right at the edge
of my sleeve.
So I'm feeling myself today.
A couple minutes ago though, I was darn near,
not in tears, but you know, just frustrated.
So I'm gonna go attach those and see if we have a winner.
Let's go do the finish up the zipper,
attach these and we will be done.
All right, so let's see how it turned out.
I actually made mine longer
than I think I really needed it to be.
So I may go back and take out the zipper and readjust it.
But right here, I just have it turned up
to go with some high-waisted pants, but I really love it.
But since Mother's Day is tomorrow,
let's do something a little bit special.
Yes, this is my daughter.
Her name is Gabrielle.
And because I knew this top was gonna be
a little bit more difficult,
I wanted to try making one for her first.
And hers is definitely a less complicated version of it.
It just has the bottom piece.
Now hers, she did have to wear a top
or a sports bra underneath because if not,
there is some side boob
because there's just a bodice piece without that side part.
So it taught me a lot doing it for her
so that I can in turn teach you guys how to do it.
But I absolutely love these.
And we had a super fun time modeling together.
And this goes out to all the mothers out there
doing your very best to raise happy and healthy kids.
I hope you guys have enjoyed this video.
Definitely subscribe if you haven't subscribed.
I have a whole host of videos right here
as well as this ribbed neck tank top
which is, you're gonna need it soon
because summer is coming.
I promise even for you guys living in cold climates,
it's coming and you're gonna need this tutorial.
So definitely check that out
and I'll see you guys in the next one.
Bye!
