DIY Roof Batten Canoe, super simple design - everyone can do, with only few common tools

Simpler and Simpler
136 followers
2 Video Views·Oct 23, 2022
Hello YouTube! Welcome to the second part of my low-budget roof batten canoe project.
Thank you so much for so many feedbacks and comments after the last video. For those who
haven't seen my last video, I built a canoe from nothing else than roof battens. The goal was
to keep the material cost under 150 Swiss francs or dollars and I simplified the design that much
that it should be possible to craft this canoe within two days and with some common tools
everyone should have at home. As I was almost finished with my boat, I tested it in the fish
pond of my neighbor to see if it's watertight or not. The fish pond is about five meters. My boat
has three meters seventy. The test was successful. Only a few drops squeezed through such a branch
spot but after painting the boat with boat varnish this should be fixed. As I was finished
with my canoe, I realized that I'm not really happy with the look with the design of my canoe.
It looks a little bit like a coffin or like a battleship from the world war one and on top my
neighbor asked me if he can use my my canoe as rice planter box if I don't need my canoe anymore.
So that's why I decided to add a slightly raised bow and stern and like this it should look a
little bit more like a traditional Indian canoe. These elements should also serve as handle to
carry the boat by hand. I will make it from leftovers I cut it away from the floor. Further
on I will attach 10 meter ropes at both ends so that another boat can pull me or that I can tie
my boat to a stone or tree. I have also a special idea for a seat. I really wonder if that works.
Later I want to cut the gymnastic mat that it fit in so that my knees are padded when I'm
paddling on the knees. How I make a paddle from roof paddons I'll show you in a separate video.
So let's start to work!
