This Tool Helps You DRIVE SCREWS WITH EASE! (Bit Guide/Bit Sleeve/Drive Guide/Drill Bit Sleeve)

The Honest Carpenter
14 followers
8 Video Views·Oct 22, 2022
What exactly is this thing? I've been asked more times than I can count.
Clients see it in my drill and they just have to know. So in this video I'm going to talk about
what this tool is, what it does, and how to use it. That's coming up next on the Honest Carpenter Show.
This tool is called a drive guide or a bit sleeve or a bit guide. It's got a bunch of names but it
basically exists to help you drive fasteners and keep your fingers safe. If you don't have a drive
guide then you have to physically hold a screw against your drill bit as you start driving it.
If it's a long screw or one that wobbles on your bit you sometimes have to hold it the whole time
you drive it. The friction here can burn your fingers or it can cut you with little metal burrs
especially if you're using phosphate drywall screws. Also you can easily stab your hand when
the bit slips out of the slot. This is no joke. I've gotten puncture wounds this way. Most every
tradesperson has. But the drill bit guide prevents these problems. It has a shank that chucks into
the drill. Then it has a pocket for the bit to sit in and it has this metal sleeve that slides up
and down the shank. You can put most any kind of driving bit into the end. Then you can slot a
screw onto the bit and put the screw point where you want to drive it. Now you just throw the
sleeve over the screw and start spinning. The sleeve traps the screw in place keeping it upright
through the entire drive. As the screw sinks in the sleeve slowly retracts itself until you're
fully embedded. You pull the drill back and you're ready for the next fastener. The sleeve also gives
you something to hold on to as you drive. It spins around the shank saving your fingers from friction
and giving you greater stability. Many of these drive guides also have magnetic tips so they hold
screws very securely. They can usually take number 4 to number 10 size screws which is all the
standard gauges. And some can be used with impact drivers and impact bits because they're strong
enough and they have the fast mount shank. Also they come in a variety of sizes to accommodate
different screw lengths. They're really perfect for DIYers and I know a lot of pro carpenters who
use them regularly. They're great for driving deck screws, cabinet screws, even hobby screws.
You can always just keep one in your tool belt or you can tuck it in your drill case.
I'm going to link several down below. They're a great stocking stuffer so feel free to browse them.
When you shop through these links we receive a very small commission at no extra charge to you
and we greatly appreciate the support. What do you think? Did you already know about this tool
or are you just hearing about it for the first time? Let me hear about it down in the comments.
As always, thanks for watching. Be sure to check back in for more videos coming up soon
and please consider subscribing and hitting that little bell button to turn on notifications.
That way you'll know the moment we post something.
I'm Ethan James with TheHonestCarpenter.com. I'll see you next time.
