Rookie Mistakes When Lifting Your Truck!

Custom Offsets
3 followers
9 Video Views·Oct 21, 2022
Rookie Mistakes When Lifting Your Truck!
When it comes to suspension, I would say it's hands down
the most confusing topic for people who are new
to the truck scene to get a grasp on.
So most people know or realize that modifying
the suspension on your vehicle is sort of a big deal.
So not only are you dramatically changing
the looks of your truck, but depending on which route
you go, you can drastically change
the handling characteristics too.
So, I'm Fuller from Custom Offsets,
Custom Offsets TV on the YouTube,
and whether you're a seasoned veteran in the lift kit game
or you just picked up your first truck,
we're gonna cover some of the simple mistakes,
I guess you could say, that people make
when buying lift kits, so that when you get your lift kit,
you don't make those same mistakes.
So, it doesn't really matter what people are buying,
whether it's truck related or not,
people want the best bang for their buck
and suspension is really no different.
So, the first mistake people make
is by shopping on just price alone.
You know, you pull up the website,
enter in your year, make, model, set the default search
to show the lowest price first.
Everybody does it and it's not a bad thing
to do in general, but you get what you pay for.
Picking up the couple hundred dollars,
three and a half inch lift for your truck
is still gonna lift at three and a half inches.
You're gonna be able to fit bigger wheels and tires,
but you might not be as thrilled with the ride quality
or the angles of your CV axles
or the ball joints or stuff like that.
The cheaper lift kits typically don't include
as many components to correct those angles,
but that's how they're more affordable.
Now, don't get me wrong, if you only have $500
and you don't feel like throwing a bunch of money
on a credit card or financing it,
you know, more power to you.
We were in a similar boat back in 2015
when we bought our first brand new show truck
and wanted to do the complete build for less than $75,000.
And right now you're probably, you know,
talking out loud, yelling at your phone,
like, man, $75,000 for a build,
that doesn't sound cheap to me.
But that was our budget with the brand new
Silverado 2500 included, which obviously
eats up most of that whole budget.
Now, at the same time, I can't recommend
just going out and buying the most expensive kit.
You can, just because you can.
If you find the chrome-plated, custom-built,
24-inch, four-link, coilover conversion,
you might not really need that
if you just wanna throw on some 12 wides and 33s.
It just doesn't make sense.
Shopping by price point alone can be risky,
whether high-end or low-end,
which is why we do our best to make videos like this
to educate people as to what's going on,
you know, and what works best for them.
There's a pretty solid chance that we made a video
about what fits your truck on a leveling kit,
four-inch and a six-inch kit,
and if you can't find a video on it, which is unlikely,
you can find it in the Fitment Gallery right on our website.
That's literally what we built it for,
so that you can find all of those specs
and know exactly what fits your truck
and see what it's gonna look like.
Another thing I think that's often forgotten about
is everything else related to the suspension on your truck.
So, doing proper maintenance is critical
to having your truck ride as good or better
than it did from the factory,
and if it's going to be in the air anyway,
you might as well do it.
So, get in there, inspect things like CV axles,
your ball joints, bushings, bearings,
all that kind of stuff, and so on.
So, relating back to price a little bit,
paying attention to what your kit comes with
is super important.
Some of the more elaborate kits have new sway bar bushings
or things like new ball joints or U-joints
already in the upper control arms and so on.
So, I guess to clarify, when I say elaborate,
I don't mean like super, super expensive
or anything like that.
Now, we had the chance to rebuild and redo CO2,
which is the big white 2500 I was talking about
before.
We've had the chance to take it apart a couple of times
and check all of those wear items
while we're rebuilding the truck.
So, we ended up pulling out the basic kit that we had
and replaced it with a BDS kit.
It's just a standard non-torch and drop
six and a half inch kit, nothing too fancy.
Since, of course, again, we're in a hurry
to squeeze in one of our own builds
between customer trucks,
we picked a five incher block and went to town
and we were pretty disappointed.
So, this is where another common mistake comes in.
When we put that five inch block into the truck,
it had a pretty decent amount of break,
which is similar to factory break, I would say.
I guess if you don't know what that is,
break is when the rear of the truck sits higher.
So, on a 2500, there's quite a bit of break from factory
because Chevy assumes that you're gonna be towing with it.
So, that's just because once you load it up,
then you'll sit level.
And we can't be driving around in a lifted show truck
with the back end higher.
It just doesn't make sense.
So, naturally, we cranked up the keys in the front
to raise it the same height as the rear
and overextended that six and a half inch kit
and it looked absolutely killer.
But the first drive was a real disappointment,
which was shocking because we thought,
you know, what the heck,
we just spent the extra money on a BDS kit
and it just didn't ride like the way we wanted it to.
But that was all our own fault.
I mean, it was an easy fix to turn it back down,
put the three inch block in,
then we could tell exactly why the BDS kit was worth it
when we took it for another drive.
Picking the right size block
and installing the kits properly
is super important to get the ride quality
that you expect and that you pay for.
The good news here is that we already made this mistake
and now you don't have to.
So, you're welcome.
This ties right into the next point
on the argument of what fits, technically,
and what you can make fit.
So, I haven't seen a truck in person or in our gallery
that looks bad with a massive wheel and tire combo
shoved in the wheel well.
Sure, I mean, some cutting and trimming
might be required to fit them,
but a stuffed wheel well looks so much better
than, you know, the trucks you see that skip leg day
and they have this massive wheel gap.
I mean, most of the trucks around the shop
would technically never fit the wheel and tire setups
that we have on them.
But again, with the gallery,
we know that you can make them fit
because of people like you and people like us
who aren't afraid to push the limits a little bit
and get that mean, wide, bulldog stance,
you know, the look where the wheels and tires
are as wide as possible without lifting the truck
like 12 plus inches.
So, lastly, don't forget about all that stuff
that you need to do after your install,
like an alignment and a retorque.
Those are both very important.
So, hopefully that helps you guys
if you're looking to switch things up on your truck
or just get in the lifted truck game.
If you guys haven't already, smash the subscribe button
and also we'd love to be a part of your build.
So, come check us out at customoffsets.com.
Peace.
