AWD 4 Rotor hits the DYNO! Maxed out Injectors!

Bloom tires
39 followers
7 Video ViewsยทOct 21, 2022
We're doing what we said we wouldn't and that's uh,
I was lying to myself and to you as your friend. I apologize. Uh, we're adding boost.
Ladies and gentlemen, we're adding it.
It is the night before the dyno. I just picked up Elliot from Turblone from the airport. We've
been scheming all evening. If you've watched all the videos in the car, you'll notice that
when I drove my father around, my dad around, I've not used to say father. I want to be
professional. But when I drove around, it was naturally aspirated. As soon as we connected
the turbo to it, the system kind of chimichanga the air and you can feel it. You can feel under
3000 RPM until it gets to three. Then it opens wide up. Tomorrow's going to be a lot of steady
state tuning. It's going to sound amazing and be amazing, but that is a very critical part
to the dyno process.
My, uh, my magic with my belt finally caught up to me. I put my tensioner on the wrong spot and
it stretched my belt out and I didn't think that big deal of it. I was like, okay, I'll get another
one someday. Well, that, that should have been today. It's like that old saying of when's the
best time to plant a tree. And that's 30 years ago. And when's the next best time is, uh, right
now, tomorrow's Sunday. So the worst possible timing for this, but, uh, we got some tricks up
our sleeves. So there's a chance somebody somewhere has one of these on the shelf. And I know a handful
of you guys aren't going to care unless this thing's making 2000 horsepower, but you can bite
me because this is the real world. That belt certainly put me into a tailspin. It got destroyed.
I have to give a huge shout out to the guy with the, that red RX seven with the RX three front,
uh, bumper. Todd actually was the one who figured out that coincidentally, this belt is the same
belt used on a 97 Corolla or a geo prism. The 1.6 liter as its timing belt. I'm going to go pick
that up. I'm also going to go pick up the trailer. Very fortunate that O'Reilly's had one in stock,
gets us back on track. This is the most plain looking truck. I mean, I'll argue that it's
actually pretty sick looking. It looks like lifted even though it's not. It has enabled me to do so
much on this channel that the belt let's, uh, let's see what's next. What'd you guys find?
Turn around. Oh, so remember this was leaking oil. We're like, yeah, we're like, why? Hey,
come on, bro. Really? Yeah. Oh, I made this shirt. We need to get you in a shirt now. Yeah.
He doesn't get the launch edition one though. Well, at least we could be representing,
you know, I'm lucky I got this one. I spent like 300 hours here.
I expect him to pay for it. Yeah. And you owe him 10 years of labor. Yeah. He was like,
yeah, so you don't just take that out of your paycheck. And I was like, uh,
I already did it. I don't want to be a dick, but we already taught for you. So 9% sales tax.
The star of the hour is my one ethanol right there. We're using the S so the street version,
because we're only going to about five PSI or so. Five plus 25 plus 35. What's nine plus 10?
35. Goddamn 47. Highest sports power on a four rotor in the States. That's right. We should make
a thousand at idle if I'm doing my numbers correct. Oh, I didn't see you there. I have
to film so I can't push. I've been practicing that line for a while. Belt tuning. Look up
the camera and say, thank you. Thank you. That one goes on the inside.
Not, not to just go somewhere to get fixed. Oh my God. That's the first time we've loaded it
onto a trailer. That's the first time it's ever had any. It's loaded itself onto a trailer.
It drove well too. Yeah. I mean, surprisingly, let's get that blow on his face. It's tears of
fuel. There you are a running car in the back of here. Oh, cool. Let's hope it's still running by
the time I get this truck all the way over there. This is not as nuts. That's not as nuts.
This guy's tailgating me like crazy. Looks like we just barely, we must've wedged it in on this
side too far. Let's see. Let's see much space we have on this side. Oh, just kidding. It's
wedged in on both sides. Literally the max limit of width of a vehicle that you can get onto a
trailer. Yeah. We got the red shirt shot right there. Yep. Frank's pulling, Frank's pulling the
California look. Hey bro. California. We're at fat body. Is that really how this fat body is?
Like Bugatti. Yeah. Yeah. Fat, fat Gotti Bugatti right there. Oh man. Oh man. I've, I can't hear
myself. Wow. This sounds so cool. Yeah. Yeah. Yeah. So this is, this is epic. When I saw the
shots Frank sent me, I was like, Oh my God, this is so cool. What do you want? Give me one of these
please. Done. This kind of epic shot right here. Our goal is basically to get the steady state
dyno figured out, which means 3,500 RPMs, 4,000 RPM, 45, all the way up to probably 8,500 RPM
with this dyno, they're capable of inducing a load. So imagine you're going 50 miles an hour,
third gear for typical cars and that, where you're like, you have a certain amount of load
from wind resistance, from road rolling resistance. You're putting the engine under a specific amount
of load and that'll create a certain amount of boost. If you have a small turbo, the idea being
that you now can tune for that spot. And then you'll start to see trends on how the car likes
to be ran. You can start adding boost and adding fuel almost linearly. So you get the base map.
We can then mess with everything else. We'll get in wide shots. Why do I feel like I'm zoomed in?
Oh, haha. I was zoomed in. Look at my Lord and savior.
That's how you, that's how you jump out of a truck right there. That's how you
jump out of a truck right there. I'm very, very thankful for Fat Body Tuning for allowing
us to use the dyno. It's an all wheel drive dyno linked. So I had to turn the rear differential
back. So that way it's, you know, all four tires are spinning the correct speed. So downside to
that is that means that the car is geared very, very high. So first gear already pulls to 70
miles an hour. So I don't think we're going to do like a fourth gear pull or anything like that.
Cause that's just way too high wheel speed. There's really not too much that can go wrong at
this point. We've already experienced all the things that can go wrong. It's very safe, very
straightforward. We've got tons of air being blown at it. So it's going to stay cold all about
just keeping it simple and stepping it up, stepping it up, get it a little bit further,
make some progress. Just hear the beautiful noises of this four rotor. Welcome to the vibe session.
Yeah. Yeah. I saw you put your elbow close to the judge. I've gotten so used to the car,
but it's still all new. There's nothing like it. I look at all my logs and everything's like under
16% throttle. Belt looks all right. The hardest trouble is going to be getting her started
with the turbo in first gear. You're going to have to hold it to like 5,000 RPM engine just slow.
We're running it naturally aspirated. So you see I'm missing one of the intercooler piping.
So you guys will watch the video later. This is us live streaming right now. So I'm live
streaming to Patreon. Look at this. The header's glowing. Look at this. They're ice cold.
They've got condensation on them from being so cold because of E85. We're still in NA mode. And
what we're doing right now is purposely having the dyno hold the car back. And that's why the
header was glowing so brightly. It freaked me out because obviously I'm worried that it's too
advanced timing or too late timing, causing problems with ignition. I was mama bearing it
and worrying about what was going on. EGT temps were close to 15 to 1600. We're going to do a
full sweep now. We're going to go from, you know, about 3,000 RPM all the way up in NA and see what
it does. I can turn on all wheel drive. It's that car isn't two wheel driver. Yeah. That registered
about 250 horsepower. And I'm not trying to brag. That would wipe about anything on the street,
off the street. If I had a tail, it'd be tucked. I would delete my Instagram,
my YouTube and everything. If I raced a BRZ stock and lost. I don't want those tires blowing up on
the dyno. Okay. So we're going to, we're just going to go ahead and check timing while the
main camera is downloading files. I can smell the tire rubber.
I'm very comfortable with this car and I know this is a huge responsibility for Elliot.
So I think him getting comfortable with the car naturally aspirated or kind of naturally
aspirated it we're through that now. It's finally time to put on the intercooler piping.
Car is now turbocharged is now ready for making the correct type of holes. Oh my God. Now we're
finally going to see what Garrett can do the car time for booze. Okay. So all you got to do is,
you know, it's really simple when you're doing the pole, just watch the lambda versus target AFR.
And then what are we running to? 8,500? No,
8,000. All right. So you're just going to go up in the third and then keep the RPMs below 3000
before you're ready to pull. Just let me know and I'll hit start and then you're just ready to go.
Okay. Just keep them in like 27. You lost the engine there, right? You know, I knew where it
was at. Let's see what happened there. You guys going to change the springs real quick? Yep.
That was the very first all wheel drive pull with a turbo that's with a four rotor turbo.
That's a, on a dyno that is the first pole ever done in the world. Elliot was very
kind to let me do that with my own car. The engine is so powerful that it is blasting open the
wastegates. I have four pounds springs in it. I actually think they're five. I've been telling
her before they're five pounds springs and they're opening up under one pound. And then at the top
end, just dropping off. What I want you guys to know is I'm not chasing numbers right now. It's
all relative, but even looking at my run versus the previous run, just by going from rear wheel
drive to all wheel drive, well, doubled, almost doubled the horsepower. So it shows you that not
every number that you're measuring on the dyno is exactly accurate. You use the dyno as a tool.
Of course, it's fun to try and peg it out, but what you're really doing is looking at relationships
between runs, you know, using the same dyno. So we'll obviously, we're going to have to come back
here multiple times and watch as it improves or goes down or whatever the case may be. That
was the world's first all wheel drive turbocharged four rotor pull. I only went to 80% throttle.
Oh, as cool as the tune was. That's nice. Yeah, that felt good. I'm not used to seeing horsepower
in four wheel drive. I had to do 20 pulls to get comfortable. We're doing what we said we wouldn't
Yes, I know. I was lying to myself and to you as your friend. I apologize.
We're adding boost. Ladies and gentlemen, we're adding it.
Yes. If she's three across the board, that's definitely not back pressure problem. That's
just opening up. That's responding really well for being such a huge turbo. I'm just
excited. I got a pound of boost at 3000 RPM basically. Oh, there is one screw missing out
of all of them. Yeah. It met a bad debt. Those are very soft screws and somebody I'm not going
to name names Isaiah. I'm just saying it's not Isaiah. Uh, it might've been me thought that I
only had five pounds springs in there. When I opened it up, I had one screw, like just one
thread on there and I had 35 pounds springs with, it was like four springs all together, ripped
open and bent the screw in half. I was like, you dumb ****, Isaiah. On this car,
fifth gear is one-to-one. So we're not even close to that.
We're only going to 6,000 and change and we're already well into almost 600 horsepower. That's
all wheel drive. The wastegate springs are opening up and you can actually see it basically boost
the reverse of boost creeper. You can see it bleeding off. It's way, way more responsive
than I thought it would be. You know, 106 million, you're thinking, you know, lag city,
but that, that 1.0 AR housing from tile. Oh my God. Single digit pound of boost for a car that's
meant to do 40, 45, 50. This night has been extremely successful. We went further than we
said we were going to. This is the engine that Dave and I rebuilt. That's it. You know,
it won't run. It won't whatever. We just made it through a whole dyno session
and she sounds better than ever. This moment has all of us, just like all of you,
thinking of everything needed to now make the thousand horsepower, which was not part of the
plan. 80% injector duty cycle on all eight injectors on E85. Very happy with the Holley
VR2 setup. Both pumps are on low and we made this much horsepower with E85. At this point,
it's wire all the 2600s in. This video will probably come out before this weekend.
Therefore, I will tell you guys, um, this vehicle will be at Hoonigan's, uh, 2020 inaugural
Bernard bash. This is a rotary and we're at 700, almost 800 foot pounds of torque. I want to see
four digits. I've promised this a long, long time ago, and I'm not giving you guys anything less.
So.
