I Bought A Destroyed 2018 Dodge Ram 2500 For Cheap

Shaping Driving
83 followers
34 Video Views·Oct 20, 2022
Welcome back to the channel in todays video we start rebuilding my new 2018 Dodge Ram 2500!
Follow me on instagram https://www.instagram.com/vtuned/
Get some Merch https://vtuned.com
Credit: vTuned garage
What is up guys welcome back to the channel welcome back to another video in today's video
We're not going to be focusing on our 1966 ford mustang reston wad, but we do have a new build. Let's go. Check it out
So here it is. It's a 2018 dodge ram 2500 with a turbo diesel
6.7 liter engine we got this thing off the auction
I'm, actually going to tell you guys the price right now because it is pretty cheap. We picked this thing up for
$11,000 so if you're wondering it is really cheap, but it is kind of destroyed
Let's go ahead and look at some of the damage up front. We have a fender that's destroyed
The bumper is a little destroyed too, and we do have some suspension damage under here
Let's go check out what we have under here. So under here we obviously have this
Uh, i'm guessing this the drag link is broken off right here and our steering box is broken, too
I'm guessing the whole thing just broke right off of here, but everything else looks pretty good
There's no other damage over there and it doesn't really look like the frame rails are bent that
Bumper kind of just bent over so the frame rails look pretty good right now
Just from the first look and we do have a spindle on the axle that is actually cracked in half
You can see that right there
So i'm pretty sure all we have to do is just replace that maybe replace the actual shaft inside not too sure yet
We'll figure that out in a minute. Once we start taking everything apart. Now, let's just keep moving along
See what else we have. So we do have some core damage right here
i'm guessing he hit a tree or something because there is
Some pieces of tree where there was some pieces of a tree stuck in the actual bed over here
But we do have a broken door right here
They got sideswiped probably when he hit the tree
It seems like he hit the tree in the front or he hit something and then he hit a tree in the back
But we still don't know yet and this truck was actually a stolen
So it's a theft recovery and then we have the most of the damage is back here as you can see this entire tabs
Section right here is just absolutely destroyed
It doesn't look like it pushed any of the frame and because it didn't even bust the window or it didn't buckle the roof
Let's pull this off and get a little bit of a better look at what's going on here
That door is completely toasted we have to get two new doors for this side right here
Now let's keep moving to the back. The bed is obviously crunched. We're gonna have to get a whole new bed
It crunched everything all up through here and there's a bunch of junk in the back
We got some kind of top of radiator in here. I don't know what it's from
But I guess they stole that too. But let's go ahead and check out what we have underneath
Oh, I actually forgot to show you guys the rims. These are some hostile forged. Let's see what they are
There are 40 by 15. You got 24 some pretty big rims on this truck
I mean i'm not a big fan of the chrome, but it's kind of growing on me
I kind of don't like it, but I kind of do so we might keep that i'm not too sure
And then we have some toyo open
Countries, I think yeah, that's what they are. They have some pretty decent tread, but this rim is unfortunately bent right here
We kind of tried uh hammering it out so we can just hold some air in there, but it's not holding air
So we'll probably definitely have to get some new rims or just get one new rim
Now, let's see what we have going on in the back
The tailgate has a little bit of damage right here. Nothing too major. That's pretty easy fix
And then we will need a new rear bumper because it's kind of crushed all up through here right there and right there
Now let's check out what's going on with this rear axle because the truck is kind of sitting lopsided. So let's go under here
Let's see what's going on and check that out. We have an axle that's just snapped right in half
It just broke it right there
So i'm guessing when it hit that tree it just broke everything it broke one control arm over there
And I think the bottom one ripped out of the axle, but the lift kit actually looks pretty good
We don't really have anything broken. It did shear off one of the bolts right there
But I think we can just get a new bolt, but everything else is pretty good quality
This is a bds eight inch lift, which i'm surprised everything held up this good
We did do a little bit of a look around the lift make sure everything is nice and good
So let's go ahead and check out what's going on inside the truck
So the driver's side on this truck is actually in pretty good condition
We do have one dent right here, but we are going to be replacing the whole bed. So that is good
All the suspension on the driver's side is good on here. We got the bds lift kit
We do have some pretty crappy shocks. I'm, not sure why it didn't go with some cooler shocks
I'm guessing the stock ones and we also have the upgraded control arms in the front
Although the passenger side is a little bit bent you can see under there. It's like a banana
Let's go ahead and hop in this thing and see what's up with the side
So this is the bighorn package
I'm guessing it's the higher bighorn because it does have all the leather here and then it has the leather seats
Let's go ahead and hop inside here
It does have like the leather seats and all the goodies as power folding mirrors, which is pretty cool
And then inside here we do have the navigation system
See if we can get it to turn on
And it turns right on it does have 70 000 miles, but we did get this truck for only 11 000
Which is pretty cool. So we do have one blown airbag right here
We have one roof airbag blown and the dash airbag blown and it's pretty weird the passenger side seatbelt
Or the seatbelt actually blew but the seat didn't go but on the driver's side
It actually did which kind of sucks, but it's no problem. These seats are actually pretty easy to repair and it's pretty cool
It's leather on the sides and we have the actual center console right here
That's exactly what I was looking for in a truck because I do like
Having a nice center console. Some of them don't really have that and this truck is kind of loaded
We have all the heat. We have the seat warmers the steering wheel exhaust brake a bunch of cool stuff on here
And that's what I was really looking for
I didn't really want a base model because i've had one of those before and I just did not like it at all
Let's try starting this thing up
Check that out starts right up runs pretty good. And then we do have the sliding rear window in the back
Sliding window does not work, but it runs pretty good. Sounds good. Doesn't sound like there's anything wrong with it
Let's go ahead and shut it off
And we do have a bunch of other stuff in here. We have a bunch of uh,
I'm, guessing some some hair treatment if anybody wants to get their hair done check that out
But yeah, there's a bunch of junk in here because this truck was stolen we have a bunch of shirts or something in here
Oh, look what we got back here
Yep, that might have been why they wrecked it. Let's go ahead and see what we're about to do on it
So now that we have all the damage assessed on the truck, we're gonna go ahead and start repairing it
We did pick up some parts because we've had this truck for quite some time
If you guys follow me on instagram at vtune, you'll know that we bought this truck around a month ago
But we kind of got busy on the mustang project and now it's time to hop on it and get this thing done
We do have the rear axle already. It's actually right here a good friend of mine condor builds actually hooked me up with it
He also has a youtube channel does some pretty cool stuff
So go ahead and check him out if you want to and we have this rear axle right here
We're gonna go ahead and start putting it on the truck. I'm, not too sure how to get these lug nuts off though
That's the only weird thing about it. I guess you need to make either make a special socket or buy one
So we're gonna go ahead and try to make one maybe cut two in half and weld them together
So let's go ahead and do that and jack this truck up in the air and start removing this rear axle
So we got the truck jacked up we went ahead and put some blocks under and now we're gonna get the wheels off
We did have to manufacture this special tool right here
Check out that awesome weld and now it just slides over the top and it's just gonna unscrew all the wheels
So let's go ahead and get this side off and get the other side off
So we have both wheels off the truck now we're gonna go ahead and start taking off this rear axle
The first thing we're gonna do is remove the emergency brake lines
And then probably go ahead and remove the abs lines and the brake lines that actually go to the caliper
And then we'll be able to unscrew these control arms and slide this thing out and get the new one under it
So we got everything disconnected off the axle and just check out the carnage right there
That axle took a straight whacking broke it right down the center and we've already taken out one half of the axle
Here it is right here
Just check out how bad it was and we did have to weld it to get it off the truck
Because it was all broken off right there
And we tried welding it right there and we drove halfway off the truck and it kind of snapped
But we do have most of the axle off and we will have to replace these
Brackets or these are for the shocks. It's actually a relocation because the stock shocks as you can see on the factory
Axle they sit right here
But the relocation moves it over a couple inches and then that gives us the whole eight inch lift of the bds
And then we do have a broken control arm right here, which we will have to replace and we
Gladly have all of those so let's go ahead and get this axle off and then we'll swap everything onto the new axle
So we got the axle out underneath the truck and we did notice that the track bar mount is a little bit bent and the
Track bar is bent, but I think we can get it back on there just for now
Just so we can get the truck
Out of this position so we can get it moving and I want to get all the control arms
Nice and bolted up on there. So now let's go ahead and replace all this stuff onto the new donor axle
So we got everything onto the new axle over here
We got these little shock purges and the track bar
We will have to get a new track bar and the track bar mount because that one is a little bit bent
But it will help us get the truck inside so we can get it out. It's about to start raining over here
but here's the old axle
we also have to get some new bolts because
The tards who installed the lift last they just they threaded a bolt right there and it just did not work out
But now it's time to go ahead and slide this rear axle underneath there
So we got most of the axle on we got the brake lines routed
We still have to put a couple bolts on but it is about to start raining
So we might go ahead and just throw the wheels on and try to drive this thing inside
I'm, not sure if we'll be able to but we got mostly everything on we got the track bar on
I'm, still not sure if it's bent or if it's supposed to be a little bit like out of an angle like that
But i'm not sure yet. So we'll have to do some more research on that
We got all the shocks and everything in on that side
Now let's go ahead and get the wheels on and probably try to get this thing inside
Maybe we can drive it in and then start tearing it down even more
So we got this side on everything went on smoothly and now we have to put on this other side tire
But it is kind of bent or the rim is bent actually the tire is not popped
So we're actually going to roll it inside and actually try to straighten this out
Hopefully it can do it. So let's go ahead and roll it inside and get it straight
So
We got the rim inside we're actually going to use this porta power right here this hydraulic ram
And pieces of metal we're going to try to straighten this thing and we also got some heat
So let's go ahead and straighten it out
So we got the rim nice and straightened out just a little bit just so it would hold air
I'm, not sure. I might get somebody professional to straighten it or just replace the whole rim because I don't really trust it
You can see right here or over here. It was like kind of creasing
So I don't really want to trust that driving around road trips and stuff
So let's go ahead and get this rim back on the truck
So we went ahead and put that wheel on and lowered it down and it runs pretty good
So now we're going to go ahead and try to drive it inside probably start taking apart all these parts right here
We need to get the bed off of it the doors and probably the fenders see if there's anything else damaged if we need to order
Anything else so let's get this thing inside. We got the truck inside
It did start raining pretty bad out there
And it was pretty hard getting this thing inside because if you see here is the tire rod or the drag link
it's kind of broken so we kind of have to just
Move the wheels in and out, but we did get it inside
Now the first thing I want to do is go ahead and take this front suspension off
I want to see what's damaged underneath there. So let's go ahead and get this thing on
So we got the front wheel off now we have a better look at what's going on down here
And I noticed that there's basically just two cracks on this knuckle right here and it's pretty easy to replace
It's just two bolts one up here and one down there
and we also will need a new caliper because as you can see all these scrape marks right here that is from the
Caliper scraping against it
So I guess it got bent when it hit something and we also did find a piece of the tree
That this thing hit looks like some cedar or something
But that's that and we also have two control arms bent down here
And this is a pretty impressive lift because all I did was just bend right here
Nothing else broke over here. All the brackets are all in the same exact spot. You don't see nothing like bored out or anything
So that's pretty cool back here
Now what we're gonna do is go ahead and start tearing down the truck when you get this fender off
And get this front bumper off
So we just got the grille off and we did notice a little bit of damage right here. It's actually really minor
There's a slight little crack right there
So I think we'll be able to fix that pretty easy because this is an expensive grille
These are around like eight hundred nine hundred dollars for an oem one. So got pretty lucky on that
So let's go ahead and continue taking this thing apart
So we got everything off the front we got the fender off the fender liner and everything looks really good under here
We got super lucky. This entire apron is nice and straight
There's a tiny little dent right here, which we can just pull out real lightly, but the apron looks good
And we also got lucky back here is this is the only thing that's damaged on the body up here
So that's gonna be simply some pliers and some body hammers straighten that out
Now what we're gonna do is go ahead and remove this front bumper
We took the front bumper off and we have some more good news. This is the only damaged piece right here
I'm, so glad everything in the front is basically oem all the cooling all the rain there still has ac
In there, which is awesome. Now, we're gonna move on to the inside of this truck
We're actually gonna start taking off these doors because they are both damaged and we'll probably do some cleanup because it is super dirty
You know, you can't work on a dirty truck. So let's go ahead and get these doors off
And we'll probably clean out the inside of the truck
So we got the front door off and we've done a little bit of inspecting and I don't see any damage
Usually you'll see like a little bit of the hinge pushed in if it did go in but it looks pretty good
Now we gotta somehow get this rear door open because the door handle is busted off and we can't really open it from the inside
So we might have to cut this out a little bit and try to get this thing off. So let's go ahead and do that
We got the rear door off. We did have to cut it open to get it out because the inside door lock was broken
So we went ahead and did that and we did notice a little bit of damage right here on this pillar
If you guys remember I was talking about it in the front, but here it is right here
It's kind of just slightly pushed in but the bottom looks good
So we probably will have to put it on the frame machine to pull that out and then back here
It looks pretty good. Well, it's not really for you guys
It probably looks horrible, but for me, it does look pretty good
We don't have much buckling or much creases in here. It doesn't really look like it pushed it in too much
So that's a pretty good sign
now what we're gonna do is go ahead and clean this entire truck out because it is really
Filthy and we can't be working on a brand new truck that looks like this. We have some sour patch
Or some sour gummies. Oh, it's brand new
Check that out a little snack a little snack to keep us, uh full now, let's go ahead and clean this thing out
All right guys, so we got most of the truck all disassembled we know everything we need to order
That's gonna be a wrap for today's video. We got a lot of work done on it
Everything is disassembled
If you enjoyed today's video go ahead and hit the subscribe button drop a like and follow me on instagram
And also if you guys want to cop some merch support some awesome builds head over to vtune.com. Thanks
