Fixing the Frame On MY Destroyed 2018 Dodge Ram 25I Bought A Destroyed 2018 Dodge Ram 2500 For Cheap

Shaping Driving
83 followers
25 Video Views·Oct 20, 2022
SimpliSafe is award-winning home security that keeps your home safe around the clock. It's really reliable, easy to use, and there are no contracts. Check out SimpliSafe here: http://simplisafe.com/vtunedgarage
Follow me On Instagram https://www.instagram.com/vtuned/
Cop some march https://www.vtuned.com
Credit: vTuned garage
What is going on guys welcome back to the channel in today's video
We're going to be back to work on our 2018 dodge ram you guys remember in the last video
We did get everything nice and tipping apart. We know exactly what was damaged and surprisingly
There wasn't much damage up front and we also took off the doors
We got both doors off and now that exposed us to this damage right here
So in today's video, we're probably going to start taking out some of the seats
So we can get to all this because we are going to be welding and cutting right there
And we also need to take off this bed because we do have a new bed. This one is completely toast
You can't just replace the bedside and then we'll also have to take off the rear bumper
So let's go ahead and take off this bed in the rear bumper
So we got the bumper off and we went ahead and unplugged the taillights and the gas cap over there
Now it's time to just unscrew all the bolts holding you down and we can get this bed off
So we got the truck bed off and this thing is almost ready to go on the frame machine
We're gonna have to replace this entire piece back there
But as you guys know this truck is a stolen theft recovery and that brings us to today's video sponsor
Simply safe simply safe is an incredibly effective home security system to keep your home safe or our case
Keep our shop safe and you can order this kit either online or you can do it over the phone because there's a lot of
Different kits and different options you can choose from and once it comes in it's super easy to install
You can install it in under an hour
All you do is simply peel off the double-sided tape stick it on your door
Which we will be doing here in a minute and the cool thing is this kit is 24 7 monitored by professionals
So if you do have a break-in or something
They'll call the cops and get that squared away and it is really cheap only 50 cents a day
Which is super cheap compared to some of the stuff we have in here
It can't suffer a break-in because that would really suck. So we were covered by simply safe
So here's everything our kit came with we have the base station right here
Which is going to communicate with all of our other sensors
We have two cameras one doorbell camera and then one other camera that's going to go inside our shop
Then we have all of our sensors over here
We have the glass break motion detection entry sensors which are going to go all on our doors
and then we have the panic button which if you are ever in a
Panic situation you can press that and then we have our freeze
Detection sensor and our water sensor and these will notify you if anything is wrong
And then we also have a station this is how we're going to disarm and arm our alarm system
And then we also have the key fob which you can use from over 200 feet away to arm it and disarm it
Our smoke detection sensor
So if we ever have a fire or anything it will arm us right away
And also the cool thing about this system is you can add more sensors or less sensors depending on what you need
So let's go ahead and install this in our shop
So we have the camera and the base station set up in the office and we went ahead and installed all the entry sensors and
The glass break sensors now, let's go ahead and test the keypad. So here's the keypad
You simply enter your pin and then you can arm it or if you're at home, you just simply press the home button
Let's go ahead and arm it and see how this thing works
It's going to give you 60 seconds to leave the building
So let's go ahead and give it 60 seconds and then we'll see what happens after you wait 60 seconds
It's simply going to say away and now let's try opening up the door and see what happens
The system is armed now. Let's go ahead and open up the door and see what happens
And check that out guys the alarm is going off and this thing actually works and then we just press
So we got the simply safe system set up in the office and it works amazing
And you can also download the simply safe app and you can monitor yourself
If you have like a package being delivered or something like that
but if you want to get yourself a simply safe system head over to simply safe dot com slash
Be tuned or click the link down below in the description
So now we're going to get back to work on our dodge ram
First thing we're going to do is go ahead and replace the steering box right here
So we can actually drive it under the frame because the old one actually got broken off under here
If you can see the shaft is just completely snapped off. So let's go ahead and replace that piece
Be able to drive and steer now we're going to move back onto the rear
We actually need to continue on taking off some of the parts because we are about to put this thing on the frame machine
Which means we're gonna have to cut and replace this entire piece right here
So we have to get the seat out and maybe remove some of this carpet just so we don't burn it out and also cut
This rear window out. So let's get to work
So
We got the rear seats out of the truck now
It's time to go ahead and start working on removing the headliner because we need to get this rear glass out
Because the way this piece is going to get replaced is basically through here right here
We have spot welds that go all along down through there
And we did take a little better look at the damage and it looks like this piece right here is just a little bit
Bent in which I think we can pull out and straighten pretty easily
So let's go ahead and get this headliner out and cut the glass out
So we got the rear glass out and surprisingly it came out pretty easy because usually we had some trouble in the past
Using this windshield gun right here. I tried it at first, but it did not work
So I went to o'reilly's and picked up one of these and we got it out perfectly
We did not ruin any of the moldings, which is usually what happens with the other gun
So if you're ever trying to get out of rear glass
Just go to o'reilly's pick up one of these for 30 dollars and it'll be easy to take out
Now what we're going to do is go ahead and drive this truck on the frame rack because it is ready
We got everything out of here. And now you can see we have exposed the spot welds right here
This is how we're going to replace this entire piece going all the way up
So let's go ahead and start this thing up and get it on the frame rack
So we got the truck on the frame machine. This thing is pretty big it barely fit on the frame machine
But we got it up there
Now what we need to do is go ahead and try to strap this thing down because we are going to be doing
A little bit of pulling it's not going to require much pulling up here
So what we're going to do is grab some wooden blocks throw them under there
Probably just to here and then grab some chains and strap it all down. So when we're pulling it doesn't move
We got the truck nice and secure with some chains and we did secure right here by this controller
But before you guys comment that controller is bad, so we will be replacing it
But now it's time to go ahead and start pulling
The first thing we're going to do is start by pulling up just grabbing it right here and kind of seeing how everything's going to
Come out. So let's set up this frame post and give it a pull
So we get this cab section nice and pulled out now what we're going to do is start removing this entire piece
And what we need to do now is go ahead and cover everything up with these nice welding blankets
So whenever we start cutting or grinding nothing goes inside the truck. So let's go ahead and do that
So we got the truck all nice and covered up now
What we're going to do is start drilling out all the spot welds right here because we are going to start replacing this piece
So we have to remove the old one and we do have the new one right over here
It is from another donor dodge ram. I was going to get a whole new piece
But they don't only sell it in the entire side and I really just didn't want to throw away money
So we went ahead and got a used piece
So let's go ahead and we'll probably have to do some
Wire wheeling right here to get all this glue off to expose all the spot welds
So let's go ahead and do some wire wheeling and start drilling this sucker out
So now that we've exposed all the spot welds by removing all the seam sealer and the glue
We can go ahead and use our drill and start drilling out all the spot welds to remove this entire piece
So we have all the holes drilled out now this piece is ready to come off and what we're going to do is use our
Chisel that is right here and we're simply going to stick it in here and kind of just pop off all these spot welds
Let me show you
So we got this entire piece off it came off pretty easy and we don't really have much damage inside the inner piece right here
We just have a little bit which we will straighten out with the hammer
And then we're gonna have to splice in a new piece up there
Which it kind of slides in underneath the roof and everything over here is looking pretty good
We'll have to do some more grinding and cutting clean everything up over here
Now what we need to do is start working on our donor piece, which is right here
So we're gonna have to go ahead and probably take the door lock off and then start drilling out all the spot welds
Basically replicate exactly what we did on that piece onto this piece. So let's get to drilling
So we finally got the donor piece all drilled out really nice. It came out really good
All nice and clean and what I usually like to do is just go ahead and use a wire wheel to clean everything up before
I do all the drilling now
What we're going to do is do a little bit more cleanup back here
Clean all these spot welds up and then we're going to try to test fit the new piece and probably go ahead and throw on
the doors
So we got the new donor piece on we actually have to do a little bit more pulling on the inside area over here because
It was pushed in a little bit more but I think we got it almost
Almost there and then we can cut and trim all this but I really want to put the doors on
And just see how they fit because I do have two donor doors from another dodge ram
So let's get those doors and put them on and see what happens
So we went ahead and threw on both of the doors and we also just put on the fender just to see how everything is
Lining up and we got some pretty good news over here
The gap is looking pretty good going all up through here
But up there it is kind of small and I think the issue with that is is the hinges are actually bad
Because the gap here is a little bit too big and I think it's a little too small over here
If we push the fender in so i'm guessing when it got in the accident, it kind of pulled those hinges back
So we will have to get some new hinges for there, but everything else is looking pretty good inside here
We also might have to do a little bit more pulling on this little hinge pillar right here
Because as you can see there's a little bit of a gap right there
That means that this hinge pillar right here needs to come out just a little bit
Just a couple of tips and tricks that you learn along the way of doing this for so long
And then up there you can also see that is where the hinge should be
So that means that hinge is pushed in too but looking under here. It is looking good
We got everything lined up
And then once we do we will probably just go ahead and get some new hinges before we do any cutting and welding here
Because I want to make sure everything lines up really good before we cut and weld it
So we don't have any mishaps and we don't have to redo anything
But it's looking pretty good so far all the spot welds as you can see right here
They're lining up in the exact same spots. So that's a pretty good sign right there
And then back here we will have to just simply clamp everything down
But you can see back here too. The spot weld is almost there just needs to push in just a little bit
So that is looking good there
And if we come around over here the gap also on the hood is looking pretty good
We kind of line the fender up into the exact spot and the gap is perfect
So that means the front end is perfectly and square didn't move over or anything
And then you can see over here. This gap is perfectly even all the way back
So now let's go back to the other side and we do have a bed coming in probably sometime this week
So we will have to wait on that because I don't want to weld anything until we have everything nice and lined up
That's just the way I like to do it because sometimes if you don't test fit everything
You sometimes have some problems and then you have to redo stuff. That's just something we don't want to do on this truck
Let's go ahead and hop up here and this thing is giant
I'm kind of scared working on it up here and then up here
We just slid that in there and then we'll have to do a little more cutting and welding up there
But it's coming together pretty good
A lot of you guys were saying that I would need a new cab
But it turns out this cab was not really damaged too bad and these doors right here. I got from a buddy of mine
Rose auto and i'm not sure if i'm gonna use them because they do have a lot of dents and dings in them
But I got a really good deal on them
So i'm gonna try to get the pdr guy out here to kind of straighten all that out and then maybe we'll use them
Or we'll just buy some new ones because they're not that expensive from the dealership
And new parts are always easier and better
To work with but yeah, that's gonna be kind of a wrap for today
All right, guys, that's gonna be a wrap for today's video
We got a lot of work done on the dodge ram. We got the cap corner pulled out
It turned out it wasn't as bad as it looked
I know it looked really bad on the pictures because of all the rust and stuff
But we still need to get the new door hinges for the door so we can line everything up perfectly and nice and square
And then we'll weld everything up
but if you enjoyed today's video go ahead and smash the like button subscribe if you want to and also
Follow me on instagram at vtune. And if you want to cop some merch go to vtune.com and get you something. Thanks for watching
