How Is This STILL Available on Amazon? [4K]

Barely a Dent
19 followers
7 Video Views·Oct 20, 2022
Recently I did a video on a banned $63 amp from Amazon, 1000 watt monoblock. This amp was from
a company called Datasap, but they listed on Amazon as Audio System N1. This amp has been
available and unavailable for a little bit. Now Datasap Digital Entertainment is a large home
theater professional audio company that makes products like this $23,000 RS-20i processor.
So I don't think it's really the same company. And I thought before that, hey, you know,
these are not going to stay around because this is not true Datasap. Well,
they actually have a four channel model also on Amazon for $78, the N4.
And the purpose of this video is just to show a cheap amp off of Amazon, really
not to highlight a company that may be misusing another company's name. So I want to make sure
that's understood, but yeah, you can see the box here. It says 25 years Datasap Digital
Entertainment uses exactly the same logo and it's still designed by America and Mindy in China.
Let's get the box open and see what's inside. Of course, we have the owner's manual. We have
the amplifier, not a whole lot else. These amps remind me a lot of the JL Audio XD series,
also the Diamond Audio with the same color. I've shown that in a previous video.
Here you get a little card that's all in Chinese. You get an owner's manual,
which is all in English, which is very interesting. It's actually a really good
manual for what it is. It gives you all the different specs. We will talk about the power
ratings later. You get another bag here with some mounting screws, also some mounting feet
for the amplifier and Allen's keys. He gives us three this time. Why do we need three different
keys? What's up with that, Allen? This is not a Mickey Mouse program.
I really like the way this amp has everything laid out here on one side, makes it easy to connect,
but it also has this top panel here. Again, the same as the JL Audio XD series. Take out the two
screws. You can pull off the panel. You have access to some other things. This panel is aluminum,
as well as most of the amp is aluminum. Of course, it's plastic as well on the side
and on the bottom, but makes it have a good feel. As far as dimensions go, 13.3 inches on the long
side, 7.5 inches for the width, two inches for the height. The width and height are the same
as the N1. On the left side, you'll see the power protect LEDs, ground remote 12 volt.
They are four gauge accepting, also two 30 amp fuses. Then we have the eight different connections
for four separate speakers, plus and minus, front and rear, and also the ability to bridge the front
and bridge the rear. They call them front bridge and rear bridge. Here we provide an example of
what happens when you bridge the amp. Also, we'll see four RC inputs, front and rear, left and right.
There is no ability to use two channel inputs. You will have to use a wide adapter or something
because there's not a switch to use just two of the four inputs. Under that cover,
we recently removed, there's a data set logo and also some adjustments for sensitivity,
crossover, low pass, full or high pass, also a frequency adjustment.
The rear channel also adds a boost at 0, 6, or 12 dB. Now, interesting enough, the sensitivity
adjustment is the standard potentiometer. However, when we go to the frequency, you hear the clicky
ratings provided in the manual include 100 by four at four ohms, 150 by four at two ohms,
or 300 by two at four ohms. It doesn't state the voltage or anything like that,
THD or anything to that level. Now let's get the amp hooked up here on the amp dyno. We do have
the front channels connected to the dyno. We have the rear channels connected to external
four ohm resistors so that we can load all the channels on the amp dyno when we do the test.
Now, if you haven't seen the test before, you'll notice on the left side,
RMS power output displayed in watts. You'll see the ohm load in the middle. The voltage for the
dyno is on the right, and you'll also see the remote display so we can calculate what the
efficiency is. Four channel test, we're going to test at one kilohertz, four ohms first is rated
100 watts by four. Again, we're going to be showing two of the four channels here, but the
other two channels will also be loaded down. Certified test we get, yeah, 83 and 77, not quite
there. Let's reset the dyno and try the uncertified test, and shocker, 83 and 77 again, 14.18 volts.
Now what about dynamically? This amp did not meet its rated power at either one of the other tests,
but look at this. It gets statistically right at 100 watts per channel dynamically. And if we were
given it 14.4, I think it would get it. So it actually did its rating at dynamic. As far as
efficiency goes, 58%. Eww. This is a class AB amplifier though, so that's kind of expected.
Two ohms is rated 150 by four. I think you guys probably can guesstimate what we're going to see
here. Not quite 150 watts, 112 and 104 right at 14 volts. Now uncertified test takes us up to
clipping. As before, it was pretty close with these two tests, 114 and 104. Now what about that dynamic
burst? Can we possibly get the rated 150 watts here using the dynamic power test? And we're
getting close. Oh, there you go. 155 and 155. So yes, it did meet its rated power dynamically.
Efficiency 49%, so it dropped quite a bit here at two ohms. Next up, we're going to bridge the
amplifier down to the two channel mode, and we're going to try the amp out. It's rated 300 watts by
two. Again, voltage not specified. And based on what we've already seen, you guys probably can
guess we're not going to see that 300 by two. 225 and 215, so about 220 watts per channel
averaged there with the certified test. So unfortunately, did not get there uncertified.
Let's see if we get right about the same. Yeah, pretty close. 227, 217 at 14.13. Now dynamic
burst, one kilohertz. Can we do 300 watts by two? Look at this. Pretty dang close, my friends. 298
and 290. Efficiency 49% at four ohms bridged. As for the numbers game, we didn't quite meet the
ratings except the burst test actually got really close and actually surpassed it at two ohms. But
yeah, there you have the results there on the screen. Now the sound demo, we're going to talk
a little bit through this, but we're going to find out does it sound good hooked up to
the Elac bookshelf speakers. Let's get us some Smoke Jacket Blues. Now I know it's difficult
for you guys to hear over a compressed YouTube video, but I would say it's a little bass heavy
and also the high end seemed to roll off. So it wasn't my favorite sound on amplifier
by any means. Try a little back rub. This one's got some heavy bass. Let's see how the amp handles it.
Now these Elac bookshelf speakers are pretty impressive as far as bass goes, but you could
really tell the amp was having a hard time controlling the woofer very well on these tests.
And I'm actually going to hook up a subwoofer here in a minute. We're going to try it in the
three channel mode. So let's go ahead and do that. We have this Rockville 10 inch subwoofer wired to
four ohms. So we're going to be running the subwoofer at four ohms. We're on the front
channel at six ohms. We added an inexpensive subwoofer here by Rockville. We're going to
try the back rubs on again, see if we can get some flex. So the guys who like the bass heavy music,
I think, I mean, hey, it doesn't do too bad powering this 10 inch sub. You are hearing some
port noise there coming out of the port, but overall for a $74 amp, we shouldn't really
expect miracles. And for a cheap, simple three speaker setup with a subwoofer, not too bad.
Let's take off that bottom panel and take a look and find out what's inside. But before we do that,
let's run the thermal camera over the outside. After doing all those subwoofer tests, the amp
did get kind of warm on the outside. Again, a class AB amp, around 114 degrees here on the
outside of the heat sink. Let's take off these Torx screws here on the bottom. We have to take
the side panels off as well. It's really a pain to get into this amp, but I do it for you guys
because I love you. Here it is, the Datasat N4 and it's beauty, four channels, 3300 microfarad,
50 volt capacitance here on the rails. And we can see for the input, 3300 microfarad,
35 volt. Those look like audio grade caps. They look like fake Nichikons. I wasn't aware of that
brand. You guys who are technicians, you can let me know if this brand is any good. And here are
the power supply MOSFETs, 60N-F06 here on the power supply side. And then for the outputs,
it's the TIP35 and 36Cs. There you have it, the guts of the Datasat N4.
Now let's move on to the pros and cons. Find out the things that we like,
things we think could be better, at least things to be aware of. First up, the pros.
It's cheap when it's available. Looks kind of cool. Two, three or four channel flexibility.
Did a rated power dynamically, which is pretty impressive, honestly. Most of these cheap amps
have the Phillips style screw that kind of squishes the wire down on the top and it uses
spade connectors. This one has insert terminals, which is nice. And it does have a bass boost on
the rear channel. It is selectable. Things to consider, it does have the basic RCAs.
Needs four inputs. There's not a two to four switch. Angle terminals, which make it kind of
hard to install. The crossover slope, we're not sure if it's 12, 6 dB or what. Sound quality
leaves a lot to be desired. Unavailable, we're not sure. Is it a trademark infringement for
Datasette? I think so, but obviously they're changing name and they keep selling on Amazon.
And my thoughts are this, you know, this company doesn't really do anything for us or for the car
audio community. I would look at a different brand where they support the industry. You know,
some of the other brands we've tested before. I'll leave links in the video description to some other
four channel apps that I really enjoy. I really think would be better for you and probably have
a longer lifespan. So thanks as always for watching. This is Big D till next time I'm out of here.
All right, now you guys want to see the lower ohm load test. So let's do 2.67 ohms bridged.
We got 236 and 222 certified. What about uncertified? We're still not getting anywhere
close to that 300 watts. 238, 224. What about dynamically at 2.67 bridge? That's 1.3 ohms per
channel. And look at that. We bust over 300 watts, 337 and 335 at 14.42. What you got to say about
that Big D? You know how them sideways go?
