Building A House Start To Finish Episode 6 Framing 1st Floor Walls

Vintage Revivals
58 followers
7 Video Views·Oct 19, 2022
Welcome back to episode 6 of building a house start to finish where we actually get out our nail guns and build something out of wood
This is pretty exciting after all the waiting
Ready to go. This is our first floor walls. But before we get building, let's check out a surprise guest that came by my dad
Those toenails missed there. There's two right there. Oh, thanks dad. Thanks for coming out today
Jesus. Welcome to my childhood
Our first step today was to lay down this foam sill sealer
It fills any small gaps that might be between the bottom plate and the concrete slab
These are the bottom plates made out of pressure treated wood
We lay them next to the bolts and mark out the bolt locations
Then we can drill them out with a bit
Even though it's tempting to drill these holes way oversized to make the plate go on easily
That's not a good idea because the washer won't catch as well. So I notice you're not wearing your hand guard
What's up with that? You're supposed to wear that
Well, they said maybe I should wear my guard at work
But I gave up on the guard because when I'm wearing my guard
I don't move my fingers and try to grab things because it's pretty pointless to try to grab something behind the guard
But anyway, I really want to get my movement back in my hand
And so I need to be using my fingers and my grip even though it hurts
To make sure that I don't get stiff and not get my range of motion back
Okay. Yeah good enough after crowning a few studs to see which way they were bowed
We laid out the top plate based on our bottom plate marks and it was actually time to frame a wall. Let's do it
On this wall. We're using 93 inch studs to make an 8 foot tall wall and we're using two nail guns on this wall
We'll show you why all right, we're nailing our first wall together. The bottom plate is pressure treated
All right
so we're using these galvanized nails on the bottom plate because the
Corrosiveness of the treatment of the pressure treated wood will rust a standard non galvanized nail
We're using standard non galvanized nails everywhere else bottom plate. That's that's a standard. There you go. These are called brights
These are hot dip galvanized and we're assembling these walls on the slab as you can see, which is down on the ground
Basically, I'm going to show you a quick trick over here
When I hold my nail gun to do this type of framing if you shoot with your
Trigger finger you can see your wrist is at this super weird angle all day shooting
What I like to do is move my thumb around and shoot like this
Use your thumb and it keeps your wrist nice and straight
So you don't break your wrist by the end of the day. Trust me that'll happen
Like most framers we use one letter abbreviations for all the parts of the wall
and if we need to move something we go over in magic marker so that we know that was the final answer and if you're
Bent over framing walls all day. It's a great idea to put sunscreen on your neck if you can find it
Once we had framed some window openings with King studs and jack studs
It was time to lay out the sill plate a great way to save time while doing this is to actually lay it against the
bottom plate and just trace the layout and
There is one very small window framed up I
Want to note that we did not sheet this wall before standing it
The reason is is because it's hard to square and straighten a wall with it on a concrete slab
If you're on a wood subfloor
You can tack the plates down with nails to straighten and square the wall
Before you put the sheeting on in this case. We had no way to do that
Here's something super important I tell everybody that's ever on our job
Where to put your hands when you're nailing a stud actually we're not to put your hands more important
We're gonna nail this stud on here
I've seen people hold the stud right here and shoot and what do you think's gonna happen if the nail comes out the side?
of the stud bang in your hand, so we'll just hold about six inches back on the stud and then
fire
Get shot with a nail sucks
What I mean I need one more Jack since we stood these walls before shooting them
We'll have to plumb the wall in both directions before putting the plywood on because that will lock it in whatever position it's in
I'm gonna use this 16 penny nail
I'm gonna drive it underneath the bottom plate
Purpose of it is to hold up our piece of plywood so that it doesn't hang too low
You don't have to fidgety fart with getting it perfect
It just sits on these nail heads and you can nail it as you can see
I like to quote nail the crap out of this connection between the plywood and the treated plate
That's what really holds the house down. That's definitely one way to do it right there on this wall
We're just putting out full sheets of OSB and then coming back and cutting out the window opening with a sawzall
This is a pretty easy way to do it
We also have a heavy-duty router with a flush cut bit that we use pretty often to do the same thing
For the openings on load-bearing walls. We're using these box headers
We're making them go all the way to the top plate so that we don't have to put tiny cripples in it takes a lot
Of time and sometimes you can't get them as tight
This is the kitchen wall at the backside of the house
The rafters will angle up from here to the front wall of the house making it about 56 inches higher than this back wall
Yo, Rowan
Duck out. I'm right above you bud. There's somebody right above you working. Just duck out. You don't want that on your head
Hey, dude, be careful cuz Eric's the worst with dropping stuff on people
He'll probably drop like the two tools that he has in his belt and they're probably somebody else's tools. Anyways, yo
Just measure seven three-quarter down to make a mark
Sorry about that
This is a wall partition and we'll use it on most of the wall intersections in the house
And here are some studs laid into place ready to nail
Notice this is so important all of the crowns are up
If you alternate the crown of your boards in the wall, your finished wall may look like a wave
Also, it's a great idea to stagger your joints on the sheeting when it's possible. Yeah, that's definitely one way to do it
It's also crucial to space this type of OSB sheeting so that when it swells with a little bit of moisture
It doesn't buckle against itself
We nail this type of sheathing on an 8-inch nail spacing and we make sure not to shoot the nails too deep
So they actually hold
Now, let me show you how to build the most important thing on a job site the lunchtime bench
And that's all there is to it, actually
It's a brown bag burrito look at that
It's kind of running I
Made that
I'm not really sure what all the other people in the world do
But we'd like to sit down like a family and enjoy our lunch
We share lots of interesting conversations and sometimes lots of intense arguments before it's all over with just like a family should
You can learn a whole lot just by sitting down for one lunch with Arlo who's been doing construction for 40 years
This guy really has been through everything and if I haven't said it before I'll say it now
I am super thankful for these guys. Let's get back to work
Watch out for that board. That's definitely one way to do it. I'll tell you one thing. My feet are sweating like crazy
If you didn't wear snowmobile boots to the job site, you probably wouldn't have that problem. It is June
I'm gonna have to put some different shoes on
This is the end wall by the master bedroom and you can see we left a little bit of the top plate off
So it fit in easily
Hey boys, we got a couple shiners up here
Okay, it's time you got to do the big wall the big window wall
I've been thinking about this wall for weeks every night when I wake up. It's the wall now. It's finally time
Got to do it. We got to do it right the first shot
No pressure just somebody decided to put this all on YouTube
You have to get it right the first shot where everybody sees it in the world. No big deal
We got this
It's just a wall
Okay. So what we got to do because we got some plumbing in the way with this wall is we got to put our first
stud on the end
It's really tall 13 feet tall
Then we got to shift our bottom plate over to where we can keep the wall squared up without being on top of the plumbing
Then we got these big built up
Pieces of sort of like a beam here, but that's the main structure for the wall
We got two giant King studs followed by two jacks on either side. We got to start in the middle
You got to put the two studs in first
side nail those together then add one jack on each side at a time and nail those on then add the second
If you put them all in the way at the same time, you'll never get it nailed together
I mean everybody knows that I'm lifting boys. Oh
Do I have the option?
Time for the big lift of the big wall and this thing was heavy
It's about 13 feet tall and has these giant headers at the top
We were standing it up on blocks so that we could get it up over the anchor bolts
It wouldn't have to lift it vertically to get it in position. That was crucial
That was fun you weren't scared at all
Piece of cake no problem. That was super scary and sketchy all eyes everything they said
Who in the world sharpened this thing, are you kidding me? I think Chase did it. It wasn't me
This is the worst pencil sharpening I've ever seen that will never pass in my book. I think a beaver got it
Look over here. Oh, yeah, I see the teeth marks. Oh for sure
Definitely wildlife some kind of wildlife got a hold of that. What'd they say? What do they say? That's one way to do it
Thanks for watching our video today
Remember to check out the link in our description to true work performance workwear and remember to subscribe if you've enjoyed this video
and i'll see you in the next one
