5 Amazing Hidden Features in Tape Measures

Vintage Revivals
58 followers
7 Video Views·Oct 19, 2022
Welcome to our YouTube channel where we share our building wisdom, or lack thereof, with
you.
The first totally ingenious thing about tape, and you've probably never thought about this,
is the shape of the metal itself is an arch.
Just like how the Romans used arches to support bridges, this arch supports the tape as it
comes out, making it a rigid rule, but when you want to let it back in, this arch doesn't
have much strength in this direction.
Watch this.
I can easily bend it this direction, so when it rolls back around itself this way, it becomes
flexible.
To demonstrate this another way, I've got my tape turned upside down so that the arch
is facing up on this tape, and I'm pushing down with about 10-15 pounds of force right
there.
You'll notice that the tape is rigid, does not break.
Now we're going to flip it over.
Now this is the opposite direction, and I'm going to put about 10 pounds of force on it.
That was about 1 pound actually, and it broke right there easily.
So that's a pretty amazing and ingenious way to design something so that you can have something
rigid turn into something that's not rigid, and roll up in here 25, 30, 40 feet.
That's just crazy if you think about it.
The engineering in this is more than you'd ever think.
As a matter of fact, I do lay awake at night and think about tape measures.
So let's check out the technology we used before tape measures, and that was a fold
out ruler.
Now this thing is rigid no matter what you do to it, so the only way to get it compact
enough to put it in your pocket is to fold it up, which is slow, and also it only folds
out to about 6 feet.
So obviously the tape measure is a much better tool.
The really ingenious thing about a tape measure that nobody really thinks about is how the
end of this tape measure operates.
You'll see that it looks like it's loose.
It looks like this thing was defective when it was manufactured.
And that's because these holes around these pins are a little bigger than the actual pins.
Now that's on purpose.
That's not an accident.
And that's so that when you butt your tape into a material, that slides back and makes
up for about this 16th inch metal plate that you're using to butt into.
But when you want to hook and pull a measurement this way, this end will actually slide out
due to this slack right here, and it will make up the difference for this same thin
16th inch hook on this piece of metal so that you'll get the same measurement whether you
hook or you butt.
It'll give you the same number exactly.
That's awesome.
Thank you for your assistance AJ.
You're welcome.
Now I've got a little demonstration set up to show you the other trick that these hook
ends have on tape measures, and it has to do with this little slot that you see on the
end.
Let me show you what it does.
So I've got a nail set right here in this piece of wood sticking up a quarter inch.
Now I can take my tape measure and hook it over this nail, and you'll notice if you look
closely that the nail head is actually poking through this slot on the end of the tape measure.
Here's another angle of that, and I know it doesn't seem super impressive, but let me
tell you two reasons why it is an impressive feature and why it's super important to get
accurate measurements.
Number one is that you usually set the shaft of the nail, not the head of the nail, on
your reference mark that you're trying to measure from.
So if you go to pull your tape measure and it butts on the head of the nail instead of
the shaft of the nail, you can see that I would be about an eighth or three sixteenths
of an inch long on this measurement, which is not good.
The other reason this is extremely important is that this nail hook keeps your tape from
sliding off the nail left or right.
So if you take this tape and change angles, or you're pulling up or down, it stays put
and it doesn't pop off, so you don't have to keep coming back to the hook end of your
tape and re-hooking it, wasting time on the job.
And for any of you guys that are new to construction, if someone asks you to hand them the dumb
end of the tape measure on a job, that's what they mean.
This end.
And if they want the smart end of the tape measure, that means they're going to take
the measurement, and that's this end.
The tape that I'm using today has one ingenious feature that most of them don't.
And I'm going to demonstrate it right now.
This is a Milwaukee Stud 25.
And this has a spot where you would grip the tape naturally that you can use as a hand
break right there, instead of having to lock the mechanism.
If you want to stop the tape from reeling back in, just put your finger right there
on that spot where your finger lands naturally anyway.
Another ingenious and sort of unknown feature about tape measures is that the actual tape
box itself usually measures three inches.
You need to run the tape out and bump the back of the tape box to the opposing wall
and simply add three inches to your measurement to get a measurement where you can't bend
the tape into a corner very easily.
To demonstrate this, we're going to roll this tape across a hallway and bump it into
the wall on the back of the tape.
Read the scale.
57 inches.
Now we're just going to add three inches to that.
This hallway is 60 inches wide.
So tape measures are laid out into inches, half inches, quarter inches, eighth inches,
and down to a sixteenth of an inch on most framing ones.
But the other ingenious thing about this layout is they're also subdivided into several other
layouts that help you get your framing correct when you're building houses.
All of the red marks on this tape, 16, 32, 48, are 16 inch on center layout and that's
a common stud layout.
You'll also notice a diamond at 19.2 inches and a diamond at about 38 and 3 eighths inches.
Now this is another layout that is 19.2 inches on center.
This 19.2 layout is most commonly used on floor trusses that are three and a half inches
wide and the one magic number on a tape measure is eight foot.
That's where the two foot, 16 inch, and you see the diamond, 19.2 centers all land on
the same layout and it's like that every eight foot down the length of the tape.
And that's no accident because a regular piece of sheeting on a house measures 96 inches.
So a tape measure makes it simple, easy to do layout when you're building houses by its
design.
You just look for the red squares, the black squares, or the black triangles to mark your
layouts.
So hopefully I didn't bore you guys to death with all that.
I find it really interesting because I use tape measures all the time, all day, so happy
measuring to you.
Remember to measure twice and cut once, that's what they say.
