Jeep Grand Cherokee Mechanical Review

The Auto Geek
46 followers
34 Video Views·Oct 18, 2022
Today we're going to be reviewing the Jeep Grand Cherokee. Now sadly while most Grand Cherokees
would never see real off-road use, with the most being a trip to your mother-in-law's cottage,
the golf course, or maybe even a soccer field, we're going to be taking a look under the hood
and underneath this Grand Cherokee to see what's inside and what makes it the traditional SUV
that it is. And we're going to start under the hood where we have Chrysler's corporate 3.6 liter
Pentastar V6. It's situated longitudinally in the middle of the engine like a proper SUV should be
for rear-wheel drive. Now this one being the Trackhawk model, it has a proper four-wheel drive
setup. Taking a look at how things are laid out under the hood here, we've got the airbox situated
on this side here that's going to bring air into this air intake plenum. Now this engine is
longitudinal which means you have three cylinders on this side and three cylinders on this side
with the drive and accessory belt section located up here. Over here we have the coolant jug,
we have the ECU computer, the fuse box, and then at the back here there's a breakout terminal that
goes to the battery which is actually buried underneath the passenger seat. Now we're going to
start by taking a look at the air intake setup. We've got cool air that's drawn in at the front
here that heads over straight to the airbox where it gets filtered out. Now you have this nice large
plastic pipe here that's going to bring that air straight into this drive-by-wire throttle body
just past the air intake temperature sensor and then into this plastic intake plenum. Now just
beside that we have an air resonator box in front here and then one at the back here that's just to
help with the sound characteristics. Now changing the air filter on the Grand Cherokee is pretty
simple just got two clips that you remove here push this box out of the way and then you've got
easy access to the air filter here. Now with the air intake out of the way it really frees up a lot
of room in this engine bay and you can definitely tell with the amount of space inside of here
how Chrysler is able to stuff a Hellcat engine in here for the Trackhawk version. Now this engine
bay is going to be pretty easy to work on because there's a lot of room inside of here especially
with just a smaller V6 engine. Now regardless we do have clear access now to this drive-by-wire
throttle body. You can also see where the upper plastic intake plenum joins to the lower intake
plenum and this here is actually also made of plastic and they're just bolted together with
some gaskets in between and that's what bolts directly to the head. Now the top of this intake
plenum we have the purge valve for the evap system that's going to bring those vapors to be re-burned
and because of the asymmetrical design of this intake plenum you can see that the right half
of the engine is pretty much covered with the intake plenum so you'd have to remove it in order
to service anything underneath. This half here is completely open. Now looking along this right side
you can definitely tell it's going to be a little tight with this intake plenum. Now at the front
here we do have the EGR valve which is going to take exhaust gases and re-burn it back into the
intake for pollution control. Now if we move to the top of the engine itself we have plastic valve
covers located on either side here. This does take 0w20 weight oil and the oil dipstick is located
way back here. Now perhaps a little awkward is the oil filter placement which is located right at the
top of the engine in between the two cylinder banks. I like though that Chrysler has already
included two hooks here so you can lift the engine out when it blows. Now taking a look underneath
the Jeep Grand Cherokee's underbody you can see we've got a fairly flat underneath here. At the
front here we have a plastic cover then in the middle part here underneath the engine we have a
metal cover that's to protect the engine oil pan. Now the transmission just behind it is left
completely open and further behind that we have the exhaust resonator then behind that we've got
these two plastic panels near the rear suspension. This under cover is actually pretty solid and
luckily it has a cutout here so you can change the oil without removing it because it is pretty
heavy. Now with that under cover removed you can see we've got clear access to the engine oil pan
over here. You can also see the steering motor as well as the front differential. Now further down
at the back there is the transmission and then underneath the other skid plate is the transfer
case. Now down underneath the Grand Cherokee we've got this little steel oil pan here that holds the
engine oil with the drain port located over here. All of the bolts are pretty easy to access in case
you need to change this gasket. Now there is an upper oil pan above it that is made of cast
aluminum. Now if we take a look at the front half of the engine here underneath this timing cover
and this valve cover we have a dual overhead cam design that's powered by a timing chain which is
good because you don't have to replace it over the life of the engine. Here you can see you've
got the connectors for the oil control valves for variable valve timing on both the intake both on
the inside here and the exhaust side on the outsides over here. Now just in front of those
timing covers is the drive belt setup. You can see at the bottom here we have the crank pulley,
we have the tensioner, we have the alternator over on this side, we've got another idler pulley on
this side and then over here we've got the water pump and the AC compressor. Everything here is
really easy to access all you got to do is put a wrench on this tensioner here, wind it backward
and then you're able to peel off this belt. Now replacing the alternator on the Grand Cherokee
is pretty straightforward. Once that belt is off there's just a couple of bolts here to remove the
ratchet and then it should just come right off. You can see where my hand is there's a lot of room
to work back here and swing your ratchet. Now working on the AC compressor is pretty straightforward
it's accessed right from the top here with a couple of bolts that hold it to the block. Once these
lines are off it's pretty easy to just take right off. Now if you follow this EGR valve down to the
bottom there if you look closely you can see that there's an EGR cooler and that's where the gases
are cooled off before it goes into the air intake plenum. Now over here at the rear right corner of
the engine just behind the dipstick we have the PCV valve. Now its rounded body is actually driven
off of the exhaust camshaft and forms part of an oil separator. Now so it separates any oil coming
from the valve cover area before it goes into the PCV system to limit the amount of oil in the intake
plenum. Now looking on top of the driver's side of the engine here you have clear access to the three
ignition coils so you can change these spark plugs out pretty easily. Over here we have the variable
valve lift solenoid. That's right this basically has VTEC on the intake side where there's a
set of cam lobes here that will vary according to engine RPM to give you more power. Now obviously
on the passenger side you are going to have to remove this big intake plenum in order to get
access to the valve cover and the spark plugs on this side. Next up we're going to take a look at
the fuel system on the Grand Cherokee and it is pretty straightforward because this is a port
injected engine. Now the low pressure pump inside the tank is going to bring fuel pressure to these
fuel rails over here. One for this bank here and one underneath the plenum for that bank. It'll then
inject it down into these injectors and you can see here directly into the intake plenum before
going into the head to get burned. Now one thing I don't like what Chrysler has done is they've
screwed this plastic fuel rail to this plastic lower intake plenum using self-tapping screws
which means that if that strips out you got to replace the whole intake. And now we'll have a
listen to the engine startup sound. Now one thing I do appreciate about having an old school Jeep is
it still uses a solid metal radiator support which is good because it won't crack in a small collision.
What I don't like however is how exposed the wheel liners are. There's no metal or anything here.
This wheel liner you can just push it down and have clear access to say hi to your suspension.
Also what's good about having a lot of space under the hood is that it's pretty easy to access your
headlight bulbs. You got good access down inside of here however on the passenger side the coolant
reservoir is in the way. At least they were nice enough to give you this little access panel
on the inside of the wheel liner. Next up we're going to take a look at this transmission which
is somewhat a weak point on many Chrysler vehicles. Here you can see we've got the eight
speed automatic transmission. It's got a plastic oil pan with these fins on it. Here we've got
these two coolant lines here that go to the ATF warmer. So we do have a cooler up at the front
and we've also got a warmer at the back here to warm it up on cold starts. Now changing transmission
fluid on the Cherokee could be a little chore. At least they do give you a drain plug unlike the
Wrangler. They also have a fill plug located right at the top here. However you do need a scan tool
to make sure you're at the right temperature before you pull the fill plug and allow the excess
to make a big mess down over here. Jeep does use a shift by wire system which means you have this
little plastic link here that's connected to an electric motor to shift your gears from park
reverse to neutral and drive instead of using a cable to link you above to the shifter. Now good
luck if you have to replace a starter on one of these. It's located underneath the driver's side
catalytic converter way up inside of there. You might have to remove the engine mount or maybe
drop the subframe a little bit to get access to it. Now once the transmission is done changing
its gears the power is then going to come over to this transfer case located underneath this
guard here. Now this has an electric motor located over here which is going to electronically engage
the 4x4 system in order to send power to the front wheels. Now this Jeep does have a proper
low gear range in this transfer case here and that's what makes it so off-road capable. Now
servicing the transfer case is pretty straightforward. Once you do remove this spash guard here
there are drain and fill ports. Now taking a look at this front differential here we've got the prop
shaft that runs from the transfer case over to this front differential. Now it's mounted to the
subframe down here through three bushings one at the front one at the back and then one over at
the side here. Now servicing this differential is pretty easy you have a fill port over here and a
drain port over here. Now that differential is then going to distribute the power to the front
wheels through these cv axles on this side and one underneath this bar. Now unlike many lower
regular passenger vehicles where the differential actually bolts to the engine housing and the shaft
has to run through the oil pan this one's got enough room to house a differential and the shaft
below the engine itself. Now once the transfer case is done sending power to the front wheels
the remaining power is going to be powered to the rear wheels through this drive shaft here
which runs above this exhaust resonator and then out to the rear differential. Now that drive
shaft is going to bring its power to this rear differential. Now because this is primarily a
rear wheel drive vehicle that's why it's nice and big and chunky unlike other soft rotors. Now we do
have an electric motor located off to the left side over here. Now servicing this differential
is pretty straightforward we have a drain port located over here and a fill port located on the
side. Now of course that power is going to come from the rear differential over through these
axles here. Now these are nice solid large axles because this is primarily a rear wheel drive
vehicle. It'll then go into the hub here there's a very unique style of boot that's actually pushed
in instead of having the ribs like the traditional CV boot before it goes in to drive the wheel.
Now underneath the hood of the Grand Cherokee there isn't too many wires and hoses that you
can't really identify. Everything's pretty simple especially if you compare it to that turbo Wrangler
that I recently reviewed. Now the front here we have the ECU with this giant heat sink on it.
Now I don't typically like this especially how it's so close to the front of the vehicle
because it's subject to heat from the engine and also collision impact. Now over here we do have
a fuse box which is easily accessible we've got all the fuses here and it's nicely labeled. Now
underneath the windshield cowl on the passenger side you can see we've got the cabin air filter
just sticking out right there. Not sure how it's going to be exposed like that during the winter
time. Over here we've got this knockout panel here for the positive terminal of the battery
so in case you need to boost it you'd hook it up here. The actual battery is located underneath the
passenger seat. And this here is the access panel underneath the passenger seat. Now of course if
battery does die and you can't move the seat you're going to have to manually figure out a
way to move it in order to access this battery. However there are some models that actually come
with two batteries buried underneath here an auxiliary battery and your regular 12-volt
battery. Now underneath the Cherokee you can tell some of its architecture is a little bit old while
some of it is pretty new. There's a mix of materials down here a lot of aluminum but there's also still
a lot of stamped steel including this tubular steel structure that runs around here to form
the subframe and engine cradle. Now taking a look at the front suspension from underneath
we've got these cam bolts over here that'll control the camber and that'll adjust this
lower control arm here relative to the subframe. Now the control arm is made of a cast aluminum
over here you can see you've got a hollow sway bar and that's going to connect to the stabilizer
bar link over here. Now up there that also connects to a bracket which connects to the strut
and the strut connects to this lower control arm. Now further inside of here we've got the CV axle
as it goes up to the wheel now luckily this does use bolted on style bearings so you don't have to
use a press to change it out. From back here we've also got access to the lower ball joint
now this is pressed into the aluminum arm so you will need a press if you do need to change it out
or you can just change the whole control arm if you want. Now i'm also pretty happy that they are
using aluminum in the knuckles as well it tends to save weight especially on such a heavy vehicle.
Now taking a look at the Cherokee's front suspension here finally we've got a traditional
SUV style suspension with a double wishbone design here you see you've got a upper control arm you've
got the knuckle over here and then a lower control arm down at the bottom there. Now down inside of
the wheel well here you can see you've got the stabilizer link now this one uses a spherical
bushing instead of an actual ball joint like down there to join to the sway bar and this bushing
attaches to a bracket that goes to the strut directly instead of to the control arm or the
knuckle. Now materials are pretty mixed here we've got stamped steel upper control arms
an aluminum knuckle here you have forged inner and outer tie rods and of course a steel stabilizer
link. Now this is the right front wheel and you'll notice that this vehicle has front steer that's
because it's a rear wheel drive biased vehicle which means that the engine itself is shifted
back and in order to not bother the four-wheel drive setup they've actually shifted the steering
to the front of the vehicle over here so the steering rack is in front of the engine. Now
replacing an upper control arm on one of these is pretty straightforward with just two bolts over
here but the axis here is pretty tight because we do have this air suspension module in the way.
Now also tied to the upper control arm is the ride height sensor for this air suspension system. Now
this being the Trailhawk it does have the air suspension system which means that instead of
having a traditional coil spring and strut it uses this big airbag you can say which is going to
inflate and deflate in order to give you a higher ride height or a lower ride height. Now this does
have a complete setup including a compressor and an air tank. Now the air suspension setup features
these air lines here that come from the compressor and plug into the strut at the top directly and
if you follow those air lines it actually leads to the air compressor located in and behind the
passenger side headlight. Now replacing the lower control arm on one of these isn't too bad though
it is a little bit involved you got to release the ball joint here from the knuckle remove it from
the strut assembly over here and then at the back here you got a couple of bolts to tie it to the
subframe then of course you've got your front cam bolt over here and then the control arm should be
free from the vehicle. Now having a double wishbone suspension on an SUV is a really good thing
because not only does it enhance ride quality and handling but it also helps with articulation
off-road however if you're planning on owning one of these specifically the trail version which has
the air suspension things are going to be pretty expensive to replace down the road. There's a lot
of components here that could potentially wear out compared to a McPherson design not to mention the
air suspension setup that could obviously leak it also has got other components including the
compressor and the air tank that could also fail. Now taking a look at the rear suspension on the
Grand Cherokee things are even more complicated than the front we have a multi-link design here
with the strut located at the top here you've got the upper control arm over here and then we have
what is supposed to be a trailing arm but it's actually bent around this giant air spring now of
course this air spring is going to inflate and deflate to change the ride height it's got quite
some size to it. Now the lower control arm is quite unique because it ties in at the back of the frame
here as well as at the front of the frame down behind this spring here now it supports the spring
itself as well as the shock absorber and the stabilizer link additionally at the back here we
have the lateral link that controls the rear toe. Now the back here we've got a mixed use of
materials we have aluminum used in this control arm here as well as this lower control arm the
top here has stamped steel we've got a forged rod for the lateral link and the knuckle itself is made
of steel. Now from the bottom here you can see just how complicated that lower control arm is
having to support the strut the stabilizer and this air spring now the bottom here it actually
joins to a ball joint instead of a bushing like most vehicles so this ball joint of course could
wear out because it's a loaded ball joint that carries the load from the spring and should have
to be pressed out and replaced. Now unfortunately replacing rear bearings means you have to remove
the knuckle from the vehicle and take it to a press to press it out. Now unlike the front the
shock absorber is a separate unit from the air suspension unit and it's pretty easy to replace
there's just two bolts up inside of there that you remove and then the bolt at the bottom here
on the lower control arm. Here you can see you've got the rear stabilizer link as it joins to the
lower control arm and then to the sway bar as it goes over to the other side. Now just like the
front the rear subframe is made of a stamped steel design and here's another look at that rear
suspension from underneath you can see the monstrosity of the rear control arm especially
because of the size of that rear air spring over there. Now one thing I find interesting is that
there's a giant cavity behind the bumper here it seems like they could have either expanded a fuel
tank or dropped down the cargo tray a little bit more or even put the spare wheel underneath here
but it just seems like wasted space. Next we'll take a look at the exhaust setup on the Grand
Cherokee. Now from the right side here it's pretty difficult to see but I can guarantee you there is
a catalytic converter on that side. Now over on this side here you can see that catalytic converter
down inside of here and its oxygen sensor and it's bolted directly to the head there is no
external exhaust manifold it's all integrated into the head. Here's what the right side catalytic
converter looks like from underneath you can see the down pipe is then going to pass this
control arm bushing over here go around the transmission and then into the resonator
behind the transfer case. Now because this is a V6 you have two banks of exhaust so there's
another pipe running along the left side of the transmission. Now one thing I find interesting is
how Jeep's using these clamps to join sections of the exhaust together here you've got a straight
pipe here going into a piece that's joined to a flange which is going to be joined to the resonator
over here whereas over on this side here is just a straight pipe that's welded to a flange. I'm not
sure the reason why they've done this but it's definitely going to make it easier if you need
to unclamp this to change either of these pipes out when it rusts out. Now I do have to give kudos
to Chrysler for using the right kind of material for the exhaust most of the new cars I review do
have a rusty exhaust and they're brand new as well. Now that exhaust is then going to go through
this mid resonator over here and then split off again into these two pipes before going into the
muffler. Now those exhaust pipes are going to run to individual mufflers at the back here and then
straight out the tailpipe there's no fake exhaust tips it comes straight out the back. And now we'll
have a listen to the exhaust. Now the Grand Cherokee has three main engine mounts one on each side of
the engine you could barely make out one on this left side here. Then if I move over to the right
side here we've got the bracket we're looking at underneath for the other mount. And then finally
at the back here underneath the transfer case skid plate we have the crossbar that holds the
transmission up. Next we're going to take a look at the braking system on the Grand Cherokee. Now
it starts over here underneath the windshield cowl where we have a vacuum powered brake booster
and a typical master cylinder with these lines over here. Now if you follow the brake booster's
vacuum line it actually comes to this t-point here and then goes out to this electronic vacuum pump.
That's right the engine's vacuum doesn't necessarily draw enough vacuum for that vacuum booster so it
relies on an electric pump to do that. Now if we follow the brake lines out of the master cylinder
it goes right down to the bottom here where we have the abs module. This is going to control
the traction stability control as well as any autonomous braking and safety features on this
vehicle. Speaking of autonomous braking features it actually surprises me that you can option out
a $40,000-$50,000 Jeep Cherokee and still not have any autonomous braking features or radar sensors
in the bumper here. I mean you could get that on a base model Corolla. Now taking a look at the front
brake setup on the Grand Cherokee we've got a floating caliper design here on a disc rotor.
Now this is a dual piston design for better braking forces. This is a heavy vehicle after all
although I'm kind of disappointed this rotor is not even bigger. Now because the steering rods are
located on the front of this vehicle the brake caliper is located at the back. Taking a look at
the rear brakes on the Grand Cherokee we've got a floating caliper on a disc rotor. Now this disc
rotor is almost the same diameter as the front rotor although this caliper is so puny and small
for such a big vehicle. Luckily though inside of this drum we do have a mechanical drum style
parking brake that you activate with your foot. There's no electronics squeezing the caliper here.
Next up we're going to take a look at the cooling system on the Grand Cherokee. Now this is a pretty
basic setup so we can expect the cooling system to also be pretty basic. We've got a coolant jug
over here with the pressure cap at the top. Just two lines coming off of it. One that splits down
over here to the EGR cooler. We've got another one here that goes to the radiator. This also splits
off to the thermostat located over here. Now if we take a look in behind the radiator here you can
see there's a lot of room to work inside of here. We've got the lower radiator hose that comes across
over here and that heads into the engine block over here just where the water pump is located
in the engine block. Now similarly at the top here we've got the upper radiator hose that goes
straight to the engine here. Now it does have a plastic thermostat housing at the top here. Now
in behind here we do have an electric cooling fan which is good because most rear-wheel drive
vehicles used to use a mechanical cooling fan attached to the crank. Now the thermostat is
pretty easy to replace. It's just a couple of volts to remove this plastic housing here
and then there's a traditional thermostat inside. There's no electronic valve like much newer
vehicles. Now working on the water pump is again pretty easy especially given the space behind the
you take off the belt and it comes right off. Now other than an extra loop that goes to the
transmission warmer down below that's pretty much it for this cooling system. Now the only
downside to the cooling system is that the condenser and transmission cooler as well as
the radiator is kind of squeezed in this location here. Now in order to remove the radiator you
actually need to remove the AC condenser which is integrated with the ATF cooler which means
that you have to remove this front bumper. Now from underneath here we can see the Jeep Cherokee's
electric power steering motor located underneath that skid plate. Now looking at the Grand Cherokee
steering setup we've got this pinion shaft here that comes from the steering shaft. It'll then
come down to this rack over here which is going to take it out to the wheels. Now I like that even
the rear skid plates covering the gas tank at the back here are made of metal instead of plastic.
That's probably because this is the Trailhawk version and it all comes with these metal skid
plate. Now the fuel tank itself on the Grand Cherokee is made of plastic. Now because you do
have the drive shaft and the exhaust in the way it does come in a two-piece design where you have a
sub pump on this side and the main pump on that side. Unfortunately accessing the pump or the
filter is pretty difficult. You can't get it from inside like a normal vehicle. You actually have to
drop the whole tank down which means you got to remove the drive shaft and the exhaust system.
Now the EVAP canister is buried underneath the rear left wheel well. Now overall mechanically
speaking I do like the Jeep Grand Cherokee because it's a very simple design. Now although Chrysler
does have quality issues and it's not known for its reliability I do have to give my hats off to
Chrysler for offering an SUV that is actually capable of going off-road unlike many other soft
roaders out there even though this is a really aged design. Now you tell me in the comments
section down below what do you think of the Jeep Grand Cherokee and the related Dodge Durango.
Do you think Chrysler should redesign this decade-old design or not touch it at all? Make
sure you follow me on Instagram for more behind the scenes footage and subscribe for more videos
just like this one.
