Buying An ANTIQUE CABOVER Ford And Getting It RUNNING The Hard Way

RetroCarz
284 followers
12 Video Views·Oct 18, 2022
On today's episode of WatchJRGO, I need to stop buying cars, but there's a chance we
might buy a cabover truck today.
What is going on, guys?
I'm WatchJRGO, and like I said, today I am in the garage picking up a quick little kit.
We're going to throw it all in the truck, and it'll be our go fetch another broken car
tool set, and I'm going to load the truck up real quick, and we are going to head there.
It's a beautiful classic truck design, and it's not something you see very often, especially
in the heavy-duty Ford chassis.
From the pictures, it's just a cab and a drivetrain.
There's nothing else on the truck.
Who knows if the brakes work?
Who knows if the engine actually runs?
I saw the gas cap is off the fuel tank in a picture.
That's scary.
We'll throw a gas can in there so we can shove a hose in that if need be, and we'll see.
It's a whole we'll see game.
Who knows if any of this is going to work.
Here we go.
Large Ford located.
No, not this one.
We're not worried about this one.
We're worried about a much larger Ford.
Oh my.
Isn't this sweet?
That is sick.
Man.
Why don't you just find a bed and extend it and make the whole back of it just bed?
That's my plan, honestly.
Heck yeah.
Oh gosh, it's got split rims.
Ew.
John Deere Ford F600 acquired.
Jake and I are rolling out because we tried everything.
Well, we...
What's the saying?
We tried nothing and we're all out of ideas?
We tried nothing and we're all out of ideas.
We actually kind of tried everything and we're all out of ideas.
So we hooked the jump pack up to this thing, which it had no battery in it, figured out
how to make the cab over release, got it flipped up, hooked everything up, hit the start button,
which is an extension cord wired to a push button, which is wired directly to the starter
solenoid.
Hilarious, I know.
And then there's another wire that you have to shove in there that runs over to the electric
fuel pump.
And after all of that, we got the fuel pump to run and the engine would not crank over.
So we hooked the jump pack directly to the starter and then turned the jump pack on and
the starter didn't budge.
And luckily we had a hammer, our assault to go tool kit there for the side by sides in
the back.
Gave it a couple of taps with the hammer, not even a flinch, which is unfortunate because
the starter has just been replaced.
And then we decided we had to give up and we're going to have to get a trailer and drag
this thing home.
They're selling that house and they need the truck out of there immediately.
So the whole reason that they were selling the truck is to get everything cleared out
of there.
There's a ton of cars hiding in the back, a Porsche 944 manual, a Power Stroke Econoline
E450.
What was the other one?
There's a V6 Mustang.
And besides that, like an old Bel Air, there was nothing left.
Oh man.
A Bel Air.
Yeah.
It was rear quarters.
It was once a Bel Air.
And it had actually been filled with trash.
The 944 had two, but we did buy the cab over for $1,000, which I think is a pretty good
deal if it actually runs after, hopefully it turns over.
We could bump start it.
We could hook a train to it, put it in gear and give it the old, it'll take off.
But I think it would be a lot smarter to just kind of go get the old gooseneck trailer and
are we really here to do things the smart way?
Yeah.
I mean, there's a safe way.
It's not ever been our MO.
And the other thing is it said runs and drives in the ad and it definitely doesn't do either
of those things because they said it hadn't ran in like four to six months.
So it did run at one time, but what I do know is it felt like there were no brakes.
So we probably shouldn't drive at all.
That brake system was very confusing to me.
Brakes are wild on that thing.
It might look late, but it's only 7 PM and Jake and I are back to pick up the F600.
So we've got a chain on this thing and we're going to have to pull it out of this driveway
and then all the way out onto the road until it's straight.
And hopefully then we can use the old winch on this trailer to get it out of here because
this thing is not starting no matter what we try.
Look at that.
We even have some light.
Shout out to the city for providing a little bit of light in the middle of the night.
How's it drive Jake?
Heavy.
I thought it might be.
Also look at this wheel.
It is like cambered all the way out there on the bottom.
That explains some of the weird noises.
That's unfortunate.
We weren't expecting that.
All right.
Well, you got the thing straight.
Shout out to Jake.
Now we're going to unhook our chain, back up.
We're going to try to put the trailer all the way under the front wheels and then just
pull it right on.
We would not be moving this truck without this trailer.
That's for sure.
No chance.
Oh, this thing's insane.
And it rolls back too, so it'll push right under the front wheels.
Jake is moving.
Notice the Harbor Freight magnet light.
It's working perfectly.
And this thing's just pulling it right up on.
Uh oh.
The winch.
Jinxed it.
The winch remote battery just shut off.
No.
Look at that giant piece of artwork.
I love these Art Deco trucks with the wraparound glass.
Jake slapped the strap, so it's not going anywhere.
It's not going anywhere.
We got to discuss this.
It's important.
The winch is still hooked up and it's chained around the front axle.
Both of these straps are around the front axle, back to the heaviest points on this
thing.
And there is a chain on the rear on a boomer.
So while DOT probably would be very upset about this, it's also pretty safe.
As long as the front axle doesn't go anywhere.
That's not going anywhere.
That chain has the tone.
Sounds like a Ferrari timing belt.
Your chain's a little flat.
It's not playing the right note.
It needs a tune up.
Alright, well the Harbor Freight light was clutch.
Thanks, Tyler.
And we are loaded up, ready to drag this thing home.
This is going to be horrifying.
We're taking surface streets, I think.
Yeah, this is not going on the highway.
I'm also worried about our height.
What is it?
Yes, yes.
Well, I am 5 foot 5.
Let me stand on your face.
Then we'll know exactly.
Just finish my back off.
I'm thinking it's 10 foot.
I think we're okay.
If that's 10 foot, we're all good.
Yeah.
Probably 12.
Well, it's 10 foot.
We're good.
We did it.
We got the thing home safely.
The iPhone.
First, we didn't have a tape measure.
And this is probably one of the tallest things I've ever pulled in my life.
We estimated, based on Jake's height
and also the iPhone measuring tool
that it was about 10 foot 4.
Who knows if that's true.
It looks like it's probably closer to 12.
But none of the bridges we went under
were anywhere lower than 15.
So we were good.
And we just pulled this thing home real slow, just in case.
I'm super excited about the story behind this.
We don't know it all, obviously.
But it is in a full John Deere library.
And it's reflective.
It's got John Deere mud flaps.
It says John Deere on the front.
There's a John Deere hat in the cab
that seems like it just got left behind.
And what's it say on the door?
We can see the imprint of the company we think this thing was.
Oh, yeah.
D.E. Wirtz & Co.
Charlotte, Michigan.
D.E. Wirtz & Co.
No data?
I was gonna look that up.
I need data.
So this is an F600.
Cab over custom cab.
As you guys know, the custom cab is always the upgraded one
The basic models have a speedometer.
Custom cabs get cool things like tacks.
Possibly air conditioning, radios.
Who knows?
We'll have a luxury.
I know, right?
So this was probably a John Deere dealer service truck.
I think so.
I think that's what it was.
It clearly does not run.
Jake and I did a lot of troubleshooting.
We didn't just throw in the towel.
It might run.
It doesn't start, though.
We did think about just pulling it and dumping the clutch.
And that might have done it.
But you still need a battery in there
because they've added an electric fuel pump.
It's probably a mechanical on the engine.
Who knows?
Maybe the engine's hurt.
Maybe the mechanical fuel pump died and washed things down.
Mechanical fuel pump's looped.
It's completely out of the equation.
Hey, at least they did that.
Most people just leave it open.
This thing's pretty cool on pumps.
Art Deco.
Cool windows.
We gotta find glass for it, of course.
I got this super cool old fan thrown in the deal.
My dad collects these.
So I figured he could always use another one.
Front grille is missing.
Fresh and Dare.
That's the brand.
And of course, the front bearings hurt.
You can hear it.
But honestly, I bet this thing runs.
They just always seem to start up.
The old motors don't care.
And you can oil these, too.
They've got a little oiler hole on the front and on the back right there.
And we're back.
Let's unload this thing and take a good look at it.
And after that, we might even be able to see if it'll start over here.
Obviously, no luck yesterday sitting in their driveway.
But maybe with a real battery?
I highly doubt it.
The ignition switch is actually disassembled.
There's no keys.
It's all just beat.
The extension cord starter switch.
I'll show you guys all of that.
I don't think we're starting it today.
But there's a chance.
Here we go.
We're gonna slide this thing forward.
Because obviously we didn't have any room to roll it back.
And then we're just gonna drop this thing right off the back.
We don't know if we're gonna have to pull it off in here or what.
But we're gonna get it off.
You got my slack pulled up?
Now we can take a good look at the cab over.
I know you guys are just as excited as I am to see this thing.
What do we got for a VIN here?
I think the VIN is C6.
Because it's a C-series.
1DVAG7348.
It's gotta be the VIN.
GVWR21K on there.
You can see the DE Wertz & Co. Charlotte, Michigan.
That is a defunct John Deere dealership.
I'm sorry.
Of course, that means the library all checks out.
And this was one of their old delivery trucks.
Really cool.
And also, the thing that blows my mind is this vinyl.
In the back, you can tell it was reflective.
So it's very close to the John Deere colors.
This may have came from John Deere or something.
That's interesting.
I thought there was gonna be a gap for two strips of vinyl.
But when you shine your phone on this, this is reflective.
And it looks incredible.
Especially the old John Deere mud flaps down there.
So we think this is basically a big block.
Just like my little Ford truck.
It's a 330 or a 391FE.
Something like that.
They say everything matches up between them.
It has a two barrel on it.
So you know that's absolutely horrible.
We got a big Rock Crusher transmission back here.
And this should be the parking brake.
Here on the drum.
And coming back here to the back.
We've got the 2-speed rear end.
This should be a full floater eaten.
And the 2-speed, if you look.
That appears to be the ground wire to it.
So I think the 2-speed is unhooked.
Which is unfortunate.
And also, the thing that I want to get hooked up more than anything.
It's always cool to split gears.
And have fun ripping this thing down the road at 30 mph.
These are split rims.
They say the most dangerous thing in the world.
I don't want to mess with them at all.
I'm looking for bolt on replacements.
If we decide to go that far into this.
And actually put it on the street.
This, I just have no idea what this is.
It's like a remote master cylinder.
And it sure seems like that's a vacuum line to a booster.
Back to some brake lines.
This may be the rear brakes with their own master cylinder here in the back.
What an insane master.
But it has hydraulic outputs.
For a PTO right here.
I think that's the PTO.
So these all go to a huge pump on the side of the transmission.
Which really kind of checks out for it being a PTO output.
That pump right there.
With that cable that engages that pump.
So that probably is PTO.
We'll jump inside here in a second.
And take a look at that.
Oh, there's hydraulic fluid to feed the thing.
So that's pretty cool.
Hydraulic PTO drive.
And the rear end axle on this thing.
It should be like a 5.58.
And the lower range should be like a 7.8.
Or something like that.
So we've got a high range, low range.
That should be pretty usable to move any amount of weight that's on the back of this.
Just beautiful.
The door panels, everything about these old trucks.
Unfortunately, the wing window is kind of broken there.
It has this hilarious parts store cigarette lighter splitter thing in there.
That's actually cut out.
But that's just funny to see.
Something that would be in a 90's Eclipse.
Shoved in this old truck.
This is the hydraulic clutch master.
And this is the master master.
And it looks like they're all probably hurting.
We haven't felt any breaks at all yet.
Oh, look at that.
There's PTO engage.
It's that cable running right to the back.
So we've got a big caution PTO control right there in front of the column.
Probably high beam, low beam.
The ridiculous starter switch.
It has a foot pump washer fluid set up there.
So you literally...
Then you come around front.
And you'll see it's squirting out washer fluid.
Well, it was yesterday.
It definitely works.
Very cool looking seats.
Flip down armrests.
Also, a really cool touch.
Even if they're not exactly working.
Awesome headliner.
Oh, coming inside here.
Speedo.
Tac.
This hack's been replaced, it looks like,
with an aftermarket ProTac there.
Alternator.
Oil pressure.
Coolant tip.
Fuel gauge.
Lights.
Wipers.
Clips.
Clearance lights.
And we've got the AC controls right there.
Even though it doesn't have AC.
It looks like just heat.
I don't know what this knob is.
That's an interesting knob there, if anyone knows.
It clearly was a Ford knob and it's been replaced.
Choke.
Radio.
Heater box.
And that's it.
We've got our floor mounted shifter for the 5-speed here.
And our little switch to split some gears.
So that should be high range.
Should be low range.
So cool.
This has got to be a fun truck to drive.
The next interesting thing is how much room there is
from the back seats to the window.
There's a huge deck back here
where you can put a ton of luggage,
bags, stuff like that.
This would be a really useful truck on a road trip.
It sounds like Jared has a tractor running.
I'm assuming some John Deere.
I guess we're going to hook onto this thing with the chain,
drag it, and either put it back
where we're going to put it in the field for now
until we have time to work on it some more,
or try to bump start it.
Because it should start with a battery in it.
So I might actually
hook up the jump pack, turn the thing on
so we've got the distributor, and then
give it a big old bump and it might come to life.
So we've got the John Deere PR out here.
Chained up.
And we're going to turn on our fuel pump.
And distributor.
Should be both.
Start baby! You don't need a starter.
Don't let me down.
Go for it!
I guess the real thing
that we don't know is if there's any fuel in the tank.
Oh yeah, there's fuel.
It's got plenty of fuel.
And dad said it was turning over.
We didn't think it was.
It must not have a lot of compression
because you weren't even bothering to pull it.
The guy said he drove it home.
Can you crank it?
We'd have to pull it to crank it.
Starter don't work.
No starter at all.
We've connected the starter directly to the jump pack
and it didn't even flinch.
So is the key on?
There's no key
because the distributor is wired directly to the battery.
If we pull it, it should fire.
I want to see if it throws spark right here.
That's what we need to do is pull it.
Pull me slow.
You turn the switch on.
Switch is on.
It ain't going to fire because I'm holding this.
Switch is on.
The engine is turning over.
Hit it!
I gotcha.
It's sparking.
We can hear the spark.
Hopefully you guys could on video,
but it had a lot of spark.
Do we have fuel?
Why don't you get up in the truck
and put the cab down.
It's completely overwhelmed with fuel, I think.
We'll just pull it fast
until it's like this.
You can see the hydraulic clutch, right?
Does it move? It's good?
Okay, go Jared!
Go!
Clutch up!
You can see the ghost throttle moving.
Clutch!
It runs!
I've got no brakes, but it runs.
Can you unhook me so I can drive it?
Look at that!
Oil pressure!
We've got a ton of oil pressure.
That huge vacuum leak
coming out of the back of the intake
makes it really hard to keep it running.
It's supposed to go to that back brake booster.
It needs a carburetor
and probably a fishing horn.
It's not knocking the engine down really good.
It does sound healthy.
The oil pressure is almost pegged out
inside and it's working.
The tach works too.
The carburetion
and the fission is in place.
It's just being cleaned up.
There's no brakes at all
so I had to let it just toast.
I don't know what it does.
The idle circuit clutch.
The idle circuit, whatever that is.
The jet or the...
I'll get a starter.
Yeah, she sounds good.
We can swap the starter tomorrow I assume
and it should be back on speed.
At least you can start it up.
That old Carter AFB
needs to be pulled off of there.
Heck, you can clean one of them.
You can kit it in about 20 minutes.
Just pop the top off.
Take the mud daubers out of the jets.
I've found them things when they've set
they're plugged up.
All you've got to do is rod them out
and you can slap them right back together
with original gaskets.
I've recovered them right on the side of the road.
I hear Holley snipers
also take 20 minutes.
Yeah, this would be
a sniper drill.
What are you going to do with this thing?
My thought was we build a huge bed
out of all steel, bring it out to here
paint it black
and then build some ramps
and then put a full polywood bed on it
and then you can just put tractors on it.
And it would be the most beautiful thing around.
Have you noticed the frame is bent
from here back?
Is the frame bent or was this because they had something on it?
No, no, no, no.
This is supposed to be straight.
This should be a straight shot.
So she's folded up.
Oh, I see the fold.
That's probably because they put something huge and heavy right back here
on the tilt, which they've cut off.
So they put enough weight
back here that it bent this thing down.
I almost thought it was supposed to have
a natural curve for some kind of
dump bed.
They bent it right at the spring hangers.
I know all about bending truck frames.
I won't say anymore.
Did you see it has a hydraulic PTO
driven right off the side of the trans?
Oh.
Yeah, these lines come out of this hydraulic box here
and then
it's got a pump right here and a cable drive.
I probably ran
a cylinder up on top of this thing.
And I wouldn't doubt
that this wasn't a rollback.
I'll bet you these were the lines
to the rollback and it was a complete
hydraulic rollback because this is what you would have used
to pick up tractors out in the field.
You would have rolled this thing back and tipped
it down and brought it up on. I was just thinking this would
make a perfect rollback for
Watch JR Go. It would, but I don't
want to pay for a rollback because it's
$50,000 for a nice one.
Well, the frame's shot. Yeah, it is shot.
Look, you've got... It's like
frost jacked in here.
Yeah, that's all rust jacking.
It's jacked.
You don't have a frame right there.
Yeah, they cut all that out. No, no, no.
The frame's gone.
Down here on the bottom?
Yeah, because they cut the top and bottom.
You're also missing
the U-bolt there.
Oh, yeah.
That U-bolt gave up.
Yeah.
I mean,
the best part about this is that.
Yeah.
That engine.
Engine, transmission, probably the rear end's good.
This belongs to a...
Two-speed electric rear end.
Yeah, we could use that rear end
for something.
But the frame is no good.
Here's where we ended up after a couple minutes
of looking at this thing. The frame
is completely shot.
I thought it was rough
and I thought we could fix a lot of it,
but there is so much
frame damage that we need a complete
frame. So if you know where a complete
frame is for an F600
like this, that's dirt cheap,
we're talking, like,
$400 or $500 or something like that,
because it's already $1,000 to ship a frame like this,
I wouldn't mind getting in
this thing and doing a quick frame swap
and having some fun. Obviously, I want
to play with the two-speed rear end. I want to drive it around.
But if not, we're going to put a starter in it
in the next episode, get it running for real,
clean up that car real quick, and back
out the door it goes. I'm just as okay
with that. I'd also love to have
a really cool show truck cab
over, but it does need a lot of work
and a lot of money thrown at it. And the frame,
I've been looking for frames already.
I knew as soon as I saw it, it was rough.
And I was like, well, I can get a frame.
It turns out you can't find frames on the internet.
And obviously no one's making
replacements. Like I said, if you know where
a cheap frame's at, let me know in the comments below. Love to talk
to you about that. And if not, that is
it for today, guys. Thank you so much for watching. Don't forget to head on over
to shop or watchjrgo.com for cool shirts
not like this. And please like, share,
subscribe, do whatever you want to do. And I'll
talk to you next time.
