To get your bike running smoothly, giving your drivetrain some TLC is essential. Doddy goes through the basics of maintaining your drivetrain to get it feeling new again.
You don’t need to take apart your entire drivetrain to get it feeling great again. Consistent maintenance makes all the difference, and a little work after every ride or two pays off. A good clean and lube is all your bike ever wants.
If you'd like to contribute captions and video info in your language, here's the link 👍 http://gmbn.tech/7c
Brought to you by the world’s largest mountain bike channel, the Global Mountain Bike Network (GMBN), GMBN Tech goes deeper into the bikes, kit and technology stories that help fuel your rides.
🎵Epidemic Sound: Just My Luck - Matt Hedbom 🎵
Our mission is to help you discover, dial-in and get the best from the latest cutting edge bikes and technology available.
With news and rumours, first ride exclusives, how-tos, the weekly GMBN Tech Show wrapping up and showcasing the week’s biggest tech stories, and more besides, if it’s off-road tech, it’s in.
Every week, of every month we seek out, showcase, and ride the newest gear and innovations from across the globe in an authoritative, inspiring and entertaining way to help you get the best from your rides. And when we’re not riding, we get geeky in an accessible, easy-to-understand way about forks. And shocks. And more to help you setup and maintain your bikes perfectly.
Engage with us every week on the channel and across social media – we’re here to answer every question you’ve got on mountain biking tech.
Regular cleaning of your transmission and your full drivetrain is the key to working smoothly
and lasting a long time. It's also a really good opportunity for you to inspect those chain links,
make sure they're in good condition, and of course, make sure there's no damage to your
sprockets. Here's how you get it done quickly and efficiently. Our first step is to assess
the condition of your bike. If your bike, like mine, isn't actually that dirty, then you don't
really need to give your bike a full clean. You can just concentrate on all the stuff that works
down here. Of course, if you have been riding in muddy or gritty conditions, maybe with sand and
stuff, then perhaps you do need to look at washing your bike fully because that sand and grit can
really work its way into the chain and make things quite hard to deal with. We use WD-40 products
here. They obviously make a bike cleaner, which is great for us because this particular one is
friendly on paintwork and I can get it near my disc brakes without having to worry about any
sort of contamination. Of course, there are lots of different bike cleaners out there. Just make
sure when you're using whatever bike cleaner you use to check that it is safe to get near your
brakes. If it's not, obviously, don't get it anywhere near them. When your bike is clean
enough to start working on that transmission, the best thing really is a dedicated chain degreaser
like this one. It is really important to note that with a spray degreaser like this, it's very
easy to over spray and get it near your disc rotors or also just near stuff like the bearings
around your bottom bracket. It's actually quite powerful stuff, so you really don't want to do
that. To start with, I'm just going to put a bit of shop towel and wedge it around the disc
rotor at the rear there just to make sure I don't get anywhere near that. I'm only going to spray
around the chain or I'm going to spray it onto the actual towel and put it where I need it.
Now, to work the degreaser into the chain and the sprockets and that, you're going to need some sort
of selection of brushes. There's various different ones out there on the market and all for slightly
different things. These ones with the bendy wire in the middle, they're actually best for just
getting into nooks and crannies, particular places, maybe behind the hub, stuff like that.
That's not necessarily the best one for this job. Now, you might have seen some brushes this sort
of shape before. They've got a scraper for getting in between the sprockets and the cassette. They're
really, really useful. Of course, these bristles are really quite tough, so they're ideal for
scraping all that grime out between those chain links. Of course, there are three particular
places you want to actually be working the degreaser in. There's the cassette area itself,
which obviously needs to be cleaned, so it's a good idea to have your chain about halfway up
that cassette so you can get access to the smaller sprockets and those large sprockets.
Obviously, I've protected my disc rotor in the background, so just take care if you are
spraying in that area. The next one is the upper side of the chain. The best place to spray that
is actually on the lower part of the chain here as it runs towards the jockey wheels. It's a nice,
easy access place. You can reach this whilst you're cycling the cranks backwards, so you can
get a good amount in there. Then for the bottom bracket area and around the actual cranks and
chain ring, you don't really want to be spraying directly in that area because of bearings,
whether it be your main pivot bearing or the actual bottom bracket bearings itself. You want
to be spraying onto a rag or spraying directly onto the brush that you're using to clean it.
Also, the rear derailleur itself can house quite a lot of muck, especially around the guide and the
jockey wheels there. You really want to make sure you start picking out some of those leaves and
all the other stuff that accumulates there because it does add friction. Of course,
holding on to that stuff's not good because it does pass through the chain as well. Make sure
you give them a bit of love and make sure that you give them a decent clean. Another point to
mention is to not spray degreaser directly at those jockey wheels or the guide wheels.
Some of them, like in this case, they've got little bearings inside. Some don't. They're
more like bushes or plates and spacers, so not as bad. The ones with bearings, you will be flushing
out all that grease, which isn't a good thing. It does mean you're going to have to give them
a bit of a service. You're best off just grinding away at the muck that's in there
with a firm brush or the sharp end of this plastic cassette scraping brush.
Obviously, the key to cleaning your transmission is a bit of elbow grease. You've got to really
get in there and be systematic with your approach. You've got to work it around. Sometimes,
you have to rinse off a bit and then go back to it again. These little fellas are really helpful
sometimes. It's a chain bath. You fill them up with degreaser liquid. There's a series of rollers
on the inside there that when you pass the chain back through there, it does a really good job.
They do use a fair bit of degreaser. If you're going to use these, make sure the chain is
absolutely filthy and it's really worthwhile using it. In this case, I didn't need too much
degreaser, so the spray stuff is perfect for this job with a little bit of elbow grease just to get
into the actual links and get behind the chainring teeth and all that sort of stuff.
I'm fairly happy with that. The jockey wheel and the guide wheels both look clean there.
The chain is looking clean, so is the chainring. The cassette looks great, actually.
It's time to just give it a rinse off. Make sure there's no more degreaser hanging around. You
don't want it to work its way into bearings like the bottom bracket or the main pivot
or even a chainstay pivot here. Make sure it's nice and clean. Then you want to give it a bit
of a dry down or leave it to drip dry. Then we'll get it up into the workshop and make sure it's
fully lubricated and everything is in good condition. Now, we've got the bike inside.
I've given it a quick wipe down so it's not too wet. Now, it's just a bit of fine detailing and
obviously inspection at the same time. What you're looking for are any sort of chain plates that
might have started separating because that's the key to a snapped chain. Of course, in each chain,
you've got the outer plates, the inner plates, the rollers, and the pins that go through them.
If those pins aren't connecting properly to those outer plates, when you pedal hard,
your chain will snap at some point. It's always a good idea just to focus on one area of the chain,
watch the chain go by, and just inspect it. A good place to start is that master link. Follow
it all the way around, one full revolution. I'm just having a look, making sure all those
chain links look the same and there's nothing out of ordinary there. No pins poking through,
no sort of damage, no cracks on those rollers either. You do want to check upper and lower,
do it the same way. I'm happy with that. I'm just going to check the upper side as well.
Looking pretty good to me. When you're looking at these rollers, make sure you can't see any
cracks because, of course, if there is a crack, that's the time you're going to get some damage
occur like a chain break. Something to note with those rollers is they should be fairly
free-flowing. The whole point of them is they rotate on their own and lubricant also adds to
that. If they don't rotate, then your chain simply will not work as smoothly. As you're working
through the chain, you're going to find a few areas that you maybe missed when you were going
through with the degreaser outside. You obviously want to make sure that that stuff does come off.
A nice little tip for that is spray a little bit of WD-40 on a rag. It's better to spray it on the
rag than directly onto the chain in this case because, obviously, you can apply it to the exact
area you need to and it's not going to actually soak into the chain as much. Make sure you wipe
it off afterwards because you don't want it to affect the lubricant you're going to put on
afterwards. That's pretty good. That looks like almost a brand new chain, in fact.
One of the reasons you should be inspecting your bike when you're cleaning it and not just
hosing it down and leaving it to dry is you find little minor niggles and problems that can later
lead into bigger ones. Although it's not a biggie here, my cable end cap has come off and the cable
is all frayed. It's a bit of a mess. I'm just going to try and twiddle this around as best as
I can. I'm just going to trim the end of it and put a fresh end cap back on there to make sure
it doesn't get any worse. With the chain fully clean, it's running nice and smoothly. The only
thing left to do is, of course, lubricate it. You've got a few options here. This does depend
on where you're riding and the time of year that you're actually doing this. In the UK,
I tend to have a dry lube and a wet lube and also a spray lube for various different reasons.
If I'm on a day out with my bike in the back of the car, I'll carry a spray lube with me because
I can run it through the whole transmission. It also acts as a bit of a water displacer as well.
It's like a multi-use product, so it's really useful for that. However, it's not as sparing
as using a dedicated chain lube. You're going to use more of this by just spraying it on.
With chain lubes, you get two types. You get a wet lube and a dry lube. The wet lube,
self-explanatory, is a thick, wet lubricant designed for use in adverse, wet, grimy conditions.
The idea is it's quite thick, so as well as penetrating into those rollers and on the inside
of those links to do its job, you actually get a bit of a coating on the chain that helps keep
water at bay and helps keep that lubricant in place. The disadvantage of a wet lubricant,
the exact point of keeping the lubricant on the chain, can also attract dust and other stuff that
can wear out your chain. You don't really want to be using this in dry conditions, hence having a
dry lubricant. A dry lubricant is aimed at using in dry conditions and is still a wet lubricant
when you apply it to the chain. The idea is it's a wet lubricant and the wet stuff in it is literally
just a carrier to get those lubricating particles into the chain. Because it's summertime, I'm going
to apply a dry lubricant because I don't want to attract any of that excess dust and stuff to my
chain. You want to make sure you apply it to the inside of the chain links. You often see people
applying chain lube to the top side here by the cassette. What it does is put loads of lubricant
all over your cassette. Actually, although it does go into the chain, it's doing the wrong side
of it. You really want it on that inside to help get it in the right place. I'm just going to cycle
it backwards, holding the rag underneath there just to catch any excess. It's gone into the right
places. Now, it's also important to note that you want to just leave this for a minute, especially
with a dry lube. A wet lube, obviously, it stays wet, so you might want to just immediately wipe
away if you've got a massive excess of it. The dry lube, actually, it uses that wet stuff as
a vessel to get those lubricating particles into the right place. If you can, just leave it a minute
or so, make sure it works its way in, and then you can wipe up the excess. Another handy thing
with dry lube is it's actually really good on the pivots on the rear mech because of the fact that
it stays dry and has its own little film to it. It's really good to just apply some to that
parallelogram, give it a bit of movement just to make sure it works its way in, and again,
leave it and give it a wipe down afterwards. Finally, there's a couple of other things you
should know about chains and lubricating them. Some people often want to ask how much lube should
they use? My advice is just enough to coat the chain. You don't want to use too much because,
A, it's going to be a waste, and B, you're going to end up wiping some of that off anyway, and C,
it's obviously going to attract too much debris, mud, muck, all the stuff that wears it. In my
opinion, you definitely want to do little and often. Just pay attention to what's going on
your transmission. Apply what you need. You'll get more out of your lube. You'll get more out
of your drivetrain. What you don't want to do is just keep putting more lube on top of more lube
because the bad thing about that, of course, you get this big gunky drivetrain, you're going to
start getting mis-shifts, it's going to attract loads of additional mud and stuff to it. It's
basically up to you to monitor it depending on how often you ride. Now, this sort of thing is
a really good thing to do post-ride. You don't want to be doing it pre-ride. The idea is you
come home from your ride, you clean your bike, you give it a bit of TLC that it needs, lube it,
and it's ready to go next time you want to go riding. Don't want to be one of those guys at
the start of the ride, everyone's waiting for you while you lube your chain, pump up your tires,
change your clipless pedals back on, do it after the ride. Now, there you go. That is all you need
to know about a quick and efficient way of lubricating and cleaning your drivetrain and
transmission. For a couple more helpful videos, click down here if you want to see the deep clean
version of this video. That's where I take everything off, do a full clean with heavy
duty degreaser and brushes and stuff. You want to do that sort of thing once a year just to make
sure everything is running smoothly. Now, click up the top here if you want to learn a bit more
about the different types of greases that are out there, whether they're suspension greases or
lithium greases, and all the different assembly compounds, thread locks, and stuff that you might
need for assembling and working on your bike. Of course, as always, click on that round globe to
subscribe to the channel, tell everyone about us. Of course, if this video was helpful for you,
give us a thumbs up.