Derailleurs, rear mechs, whatever you want to call them. Is setting them up a dark art? Or a simple process? It's easy once you know what each adjustment does! Doddy shows you how 🔧
Brought to you by the Global Mountain Bike Network (GMBN), GMBN Tech delves deeper into the bikes, kit and technology that powers your rides!
Our mission is to help you discover, dial-in, and get the best from the latest cutting edge bikes and technology available.
If it’s off-road tech you’re after, look no further! The weekly GMBN Tech Show showcases the latest and biggest tech stories, with more besides.
Fancy some factory tours and first looks to keep you informed of how the latest tech has arrived, as well as what they do on the trail? You’ve got it. Want some in-depth maintenance videos give you the knowledge to set up, look after and upgrade what you’ve got? Yep, we’ve got them, too. Lots of ‘em. In fact, our presenting team consists of bike industry professionals with decades of experience of wrenching, writing, and working at the cutting edge of mountain biking so we can keep you informed, entertained and engaged with all the tech that drives mountain bikes forwards!
Adjusting the gears on your mountain bike can seem a little bit tricky,
but honestly, it's really simple as soon as you know all the components on the derailleur.
It's also a great skill to learn because you're going to need to adjust your gears in time,
and it also means you can help your friends out as well. In today's video, I'm going to be showing
you how to do that on a Shimano derailleur, but the principle remains the same whatever brand you
have. Before we make any adjustments, let me just explain to you the layout of a rear derailleur.
In my hand here is, I think it's Neil's old derailleur. It might be crash damaged. It's a
bit scuffed up and it's a bit dirty. This is a Shimano Deore XT. It might be more expensive
than the one you have, but it has the same basic functions and features. Starting at the top here,
you have the bolt that mounts it to the bike. This can be a four, a five, or sometimes a Torx,
depending on the particular model or the year model you have. Typically, it's a five.
Next up, you have the parallelogram part. This is a sprung cage. You have this on all derailleurs,
and this fundamentally is what enables the derailleur to move and shift the chain between
those sprockets. Next up, you have the sprung lower cage. This is the lower part of the derailleur
here. I'm just going to turn it around so you can see this. You've got two wheels on this.
These are known as pulley wheels, guide wheels, or sometimes even as jockey wheels.
Now, these are essentially the same on all derailleurs, and this sprung cage
simply moves backwards and forwards so it can take up the slack in the chain and also enable
it when you're in those bigger gears or the bigger sprockets for the chain to be able to stretch
and basically compensate for that. Now, on some derailleurs like this one,
you'll see a clutch. The telltale sign of that is you'll have a little lever
right here where you can turn it on and flick it off. It's a non-essential thing. It helps
keep your chain on and make your bike quieter, but it doesn't affect the performance of changing
gears. Accordingly, it's not something that we're going to look at in this video.
The three points of adjustment that you really have are the limit screws and the B screw. The
B screw, if we deal with that one first, that adjusts the gap between the top of the guide
wheels and the bottom of your cassette. The reason you need to make that adjustment is
sometimes you might have a cassette and the biggest tooth will be a 40 tooth.
Some might be a 51 like I have on this bike here. Accordingly, the derailleur has to be set
a slightly different height in order to do its job properly. Once you've done that,
you never really need to adjust it again. Then there's the limit screws. They simply set the
maximum limits a derailleur can move within over the small sprocket or over the large sprocket.
Of course, if you have it in the wrong place on the large sprocket, there's a chance that your
chain can hop into the spokes. It's really key to make sure that you have those limit screws
adjusted correctly. It can also, if you've not got them adjusted correctly, just interfere with
the indexing of your gears. If you wonder what indexing is, that's simply the term that's used
to refer to one click per gear. One gear, one gear, one gear, and so forth. The final thing
that you'll see on all derailleurs is where the cable comes in. If you look at the one on my
chain stay on my bike here and you look back at this one in my hands, you can see how it works.
The outer hose comes into the back here and then is simply secured on this arm on the inside of
derailleur. There you go. They're the fundamental parts of a rear derailleur and they're all pretty
much the same. Now it's time to get a rear derailleur indexed. Fundamentally, there are
only a few things you need to be doing. The first one is to make sure the derailleur is straight and
securely fastened to the bike. The next one is to adjust those limit screws. We're going to take a
close look at doing that. The final one is making sure you have the correct cable tension. Once
you've got those three simple things sorted out, your gears will work like a dream. Before we start
the process, you obviously want to make sure that the derailleur is in good enough condition to work
on and that your cable passes freely within the outer cable. Just give it a run through the gears
and regardless of them being indexed, you should feel if there's any additional friction. If there
is, then you might want to replace that. Before we start making adjustments, you just got to make
sure your bike is in the correct gear first. Shift down until you're in that smallest sprocket at the
back. That is your highest gear. At the bars, you're going to be using your finger to do that.
Shift it until you're in that gear. Then you want to wind the barrel adjuster back in towards
the shifter. First up, let's move on to getting the limits adjusted. If you've got a clutch on
your derailleur, it will definitely help you and benefit you if the clutch is actually switched
off. Mine already was then. I was just reaching to check. Then you're going to need an Allen key or
screwdriver depending on what your derailleur is. This one takes a two millimeter. Yours may well
be a Phillips or a crosshead style screwdriver. If you position yourself with line of sight,
what you're looking for is the rear derailleur, both wheels here, to be lined up completely
in a vertical line underneath that sprocket. If you manipulate the lower cage down here,
you can actually get a really good position to see here. Just note how vertical that is.
If the derailleur itself is actually bent, then you're going to need to adjust that.
Note as I make an adjustment here, if I'm turning this screw clockwise, this clockwise
on the limit screw, you can see the derailleur moving inboard. Anti-clockwise, it moves outboard.
If it's too far inboard, you'll never get that small gear or the high gear. If it's too far the
opposite way, then the chain can jump off the top accidentally and take off your paint or get jammed
in there. It's a good reason to make sure it's properly lined up. It's really that simple.
Of course, getting the vantage point is key and that is why you should sit the back of the bike
here. Next, you want to repeat this with the biggest sprocket, but there are a few little
factors here. The first one is, if you have massive tires on your bike, it can be really
hard to get a good line of sight. If that's the case, then you might want to consider removing
your rear tire. The next thing to take into account is, if you have your cable on the
derailleur already or if the cable is in place. You can either manipulate the derailleur into
the position, which means you don't need the cable, or you can use your gears if your cable
is mounted. I'm just going to manually manipulate my derailleur there. Just carefully move the
derailleur and spin the pedals around. Also, you have to make sure your face doesn't hit the tire
if you're doing what I'm doing here. There we go. It's in the biggest sprocket. Now, I'm just going
to hold the derailleur cage here so I can see. As I explained before, line of sight is absolutely
key to this. It can be really tricky, and I've got my eye right at the edge of the tire here,
but I can see what I'm doing. Same as adjusting the other limit screw, you want to make sure
that that derailleur cage is vertically underneath that. It can take a bit more
messing around here to get that just right, but once you have, it's the key to good shifting.
It's doubly important at the top here, though. If it's not enabling the derailleur to travel high
enough, you're not going to get into that bigger gear, which you're going to need on the steep
climbs. More importantly, if it overshifts, then you can create damage. You could strain the
derailleur or snap it. You could snap the mech hanger. You could jam the chain behind the cassette
in between the spokes, which can break the chain, and it can also break spokes. Do take care with
that. Take a bit of time. There's no rush, and you'll get it just right. The next adjustment
you need to be making is the B-tension or that B-screw. This basically pivots the derailleur
slightly and enables the top jockey wheel there just to be spaced apart from the biggest of the
cassette sprockets there. It's really important to get this right because you just won't get
clean shifting if it's wrong, basically. The height does depend on the mech and the
cassette combination you have. If you've got up to 11 speed and you've got 42 tooth as your biggest,
you're looking between a five and six millimeter gap between that top jockey wheel and the top
of the cassette rings there. If you've got up to, I think it's a 46, you need between eight and
nine millimeters. However, if you've got 12 speed, things are a little bit more simplified.
You don't have to remember those numbers. If you look on the reverse of the mech, you'll actually
see a little mark in there. It could be a groove or it could be a painted mark like on this XTR
one here. All you have to do is go around the non-drive side of the bike, and you have to
use that B screw clockwise to make it move down, anticlockwise to make it move back up,
to get basically to line up that line or the groove with the sprockets. It's really quite
simple, but it can be hard to see if you've got big grime on it like this one has. Look closely
and you can see it. Now note, just watching the derailleur moving up and down as I do this,
you can see exactly what's going on. Like I say, with line of sight, looking around the back here,
I can see at this point, it's perfectly in line. That is the correct height for your B screw.
You've got your B tension adjusted, and you've got your outer and inner limit set. The last
thing you need to master is just getting your cable tension right. Then that way,
we can get the indexing dialed in. Now, what you're going to need to do is just undo the cable
clamp. On this derailleur, it's a four millimeter, and it's just located at the back here. I'm just
going to carefully undo that. Then what you're wanting to do is pull the cable through, make
sure it's orientated correctly in there. Now, it does differ on some derailleurs, but you can clearly
see the orientation of the way it moves around the bolt, and there's a little groove for it to slot
into. You want to pull this through until it's taut, never tight. If it's too tight, it's going
to be very unlikely you're going to get back down into this sprocket. You can even see by pulling it
how much of a difference it makes because it's quite a light action system. Like I said, you
just want to pull it to be taut. Then you want to nip the bolt up to tighten that. Now, sometimes
when you're tightening it, you might want to just, as it gets tighter, just hold the cage of the
derailleur just to resist it moving. There we go. Now, the cable, as you can see here, I can still
move it by hand slightly, so it's taut and not tight. That's the key. Now, for the last step,
the most important one is to make sure your gears are indexed. Of course, this is the correlation
of one click of the shifter giving you one gear when you pedal. Now, we're going to start with it
in this smallest sprocket because that's where we've made those last adjustments. Then we're
going to pedal it along slightly in the work stand here and apply one click at the lever.
Now, with any luck, that might correlate to one click given one gear shift. It has,
perfectly, actually. Then back down again. The idea is to make sure the first three or
four sprockets, you've got perfect shifting between them. I'm going to set it up to show
you what happens if it's not quite right. If, for example, there's too much tension here,
it's actually going to go up two or three gears instead of just going up the one gear. I'm just
going to put an extra bit of tension on. You'll see when I change gear, it will jump up more than
one sprocket. It wants to jump two there. There you go. It's actually gone up. That's just one
click. Although it goes back down again, just in one click and it jumps up three times.
There we go. In this case, I want to make sure that I take some of that cable tension back off
again. All it is is tweaking that cable tension. You can do this quarter of a turn at a time
until you've got it just right. One gear, one click,
all the way up the cassette. It should be relatively smooth shifting up and down.
Like I said, if there's not enough cable tension, it's not going to jump up a gear. You need to
apply some more cable tension. If there's too much cable tension, it's going to jump up too
many gears. Just experiment with that at the lever end there where you have the barrel adjuster
on there. Then you'll get your gears absolutely mastered.
That's the basics of how you adjust a Shimano rear derailleur to get that perfect
shifting. Like I said at the beginning of the video, it's the same principle whether you've
got an Acera X level derailleur or all the way through to an XTR. They all work in exactly the
same way. Just take the time to try and understand your derailleur a bit and it'll make adjusting it
much, much easier. As always, thanks for hanging around on GMBN Tech. We've got loads of cool,
free content for you. Be sure to subscribe if you've not already done that because there is
so much information out there. It's all free for you as well. Our Instagram page also has
loads of cool stuff. Give that one a follow. As always, thanks for hanging around.